Extended Finite Element Method for the Analysis of Discontinuities in Rock Masses

The strength and deformability of rock mass primarily depend on the condition of joints and their spacing and partially on the engineering properties of rock matrix. Till today, numerical analysis of discontinuities e.g. joint, fault, shear plane and others is conducted placing an interface element in between two adjacent rock matrix elements. However, the applicability of interface elements is limited in rock mechanics problems having multiple discontinuities due to its inherent numerical difficulties often leading to non-convergent solution. Recent developments in extended finite element method (XFEM) having strong discontinuity imbedded within a regular element provide an opportunity to analyze discrete discontinuities in rock masses without any numerical difficulties. This concept is based on partition of unity principle and can be used for cohesive rock joints. This paper summarizes the mathematical frameworks for the implementation of strong discontinuities in 3 and 6 nodded triangular elements and also provides numerical examples of the application of XFEM in one and two dimensional problems with single and multiple discontinuities.

[1]  Ted Belytschko,et al.  A method for dynamic crack and shear band propagation with phantom nodes , 2006 .

[2]  T. Belytschko,et al.  Extended finite element method for cohesive crack growth , 2002 .

[3]  E. T. Brown,et al.  Rock Mechanics: For Underground Mining , 1985 .

[4]  J. Oliver.  MODELLING STRONG DISCONTINUITIES IN SOLID MECHANICS VIA STRAIN SOFTENING CONSTITUTIVE EQUATIONS. PART 1: FUNDAMENTALS , 1996 .

[5]  Nick Barton,et al.  The shear strength of rock and rock joints , 1976 .

[6]  Ted Belytschko,et al.  Elastic crack growth in finite elements with minimal remeshing , 1999 .

[7]  J. Oliver.  MODELLING STRONG DISCONTINUITIES IN SOLID MECHANICS VIA STRAIN SOFTENING CONSTITUTIVE EQUATIONS. PART 2: NUMERICAL SIMULATION , 1996 .

[8]  Kamal C. Das,et al.  Extended finite element method (XFEM) for analysis of cohesive rock joint , 2009 .

[9]  Nick Barton,et al.  Experimental studies of scale effects on the shear behaviour of rock joints , 1981 .

[10]  Bernard Amadei,et al.  Modelling rock joints under shear and normal loading , 1992 .

[11]  Ted Belytschko,et al.  A finite element method for crack growth without remeshing , 1999 .

[12]  Richard E. Goodman,et al.  CLOSURE ON A MODEL FOR THE MECHANICS OF JOINTED ROCK , 1968 .

[13]  Ted Belytschko,et al.  AN EXTENDED FINITE ELEMENT METHOD (X-FEM) FOR TWO- AND THREE-DIMENSIONAL CRACK MODELING , 2000 .

[14]  L. J. Sluys,et al.  A new method for modelling cohesive cracks using finite elements , 2001 .

[15]  Jean-Herve Prevost,et al.  MODELING QUASI-STATIC CRACK GROWTH WITH THE EXTENDED FINITE ELEMENT METHOD PART II: NUMERICAL APPLICATIONS , 2003 .

[16]  Gernot Beer,et al.  Numerical methods in rock mechanics , 1990 .

[17]  J. Oden,et al.  H‐p clouds—an h‐p meshless method , 1996 .

[18]  F. Patton.  Multiple Modes of Shear Failure In Rock , 1966 .

[19]  T. Belytschko,et al.  Arbitrary branched and intersecting cracks with the eXtended Finite Element Method , 2000 .

[20]  R. Goodman.  Introduction to Rock Mechanics , 1980 .

[21]  D. Chopp,et al.  Fatigue crack propagation of multiple coplanar cracks with the coupled extended finite element/fast marching method , 2003 .

[22]  J. C. Jaeger.  Shear Failure of Anistropic Rocks , 1960, Geological Magazine.

[23]  T. Belytschko,et al.  Extended finite element method for three-dimensional crack modelling , 2000 .

[24]  I. Babuska,et al.  The partition of unity finite element method: Basic theory and applications , 1996 .

[25]  T. Belytschko,et al.  On the construction of blending elements for local partition of unity enriched finite elements , 2003 .

[26]  Julien Réthoré,et al.  X-FEM a good candidate for energy conservation in simulation of brittle dynamic crack propagation , 2008 .

[27]  N. Barton,et al.  The shear strength of rock joints in theory and practice , 1977 .