Correlation between the bath composition and nanoporosity of DC‐electrodeposited Ni‐Fe alloy

The outstanding mechanical strength of as‐deposited DC‐electrodeposited nanocrystalline (nc) Ni‐Fe alloys has been the subject of numerous researches in view of their scientific and practical interest. However, recent studies have reported a dramatic drop in ductility upon annealing above 350°C, associated with a concomitant abnormal rapid grain growth. The inherent cause has been ascribed to the presence of a detrimental product or by product in the bath, which affects either the microstructure or causes defects in the concentration and/or distribution of the as‐deposited films. The present work has been inspired by the observed abnormal behaviour of annealed electrodeposited nc Ni‐Fe alloy, which has here been addressed by considering the relationship between the composition of the bath (iron‐chloride, nickel‐sulphate solution, saccharin and ascorbic acid) and deposition defects (e.g. grain boundary pores) in the case of an nc Ni‐Fe (Fe 48 wt%) alloy. The current investigations have included X‐ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) in both as‐deposited and post‐annealed conditions (300°C–400°C). XPS depth profiling with Ar ion sputtering showed a significant amount of C and O impurities entrapped in the foils during deposition. As such impurities are often overlooked in common analytical techniques, new scenarios may need to be rationalised to explain the observed drop in tensile ductility of the as‐deposited Ni‐Fe alloys.

[1]  H. Eom,et al.  Mechanical and fracture behaviour of the three-scale hierarchy structure in As-deposited and annealed nanocrystalline electrodeposited Ni–Fe alloys , 2019, Journal of Materials Science.

[2]  I. Matsui,et al.  Thermal embrittlement and microstructure change in electrodeposited Ni , 2019, Materials Science and Engineering: A.

[3]  V. Singh,et al.  A review of fundamental aspects, characterization and applications of electrodeposited nanocrystalline iron group metals, Ni-Fe alloy and oxide ceramics reinforced nanocomposite coatings , 2018, Journal of Alloys and Compounds.

[4]  Minsu Lee.  Effects of Electroformed Fe-Ni Substrate Textures on Light- trapping in Thin Film Solar Cells , 2018, International Journal of Electrochemical Science.

[5]  M. Aliofkhazraei,et al.  Electrodeposition of Ni-Fe alloys, composites, and nano coatings–A review , 2017 .

[6]  P. Jenei,et al.  Characterization of Defect Structure in Electrodeposited Nanocrystalline Ni Films , 2017, 1703.05191.

[7]  M. Aliofkhazraei,et al.  Functionally Graded Coating of Ni-Fe Fabricated by Pulse Electrodeposition , 2016, Journal of Materials Engineering and Performance.

[8]  I. Matsui,et al.  Reduction in sulfur content of electrodeposited bulk nanocrystalline Fe–Ni alloys using manganese chloride , 2016 .

[9]  Toshihiro Nakamura,et al.  Thermal expansions and mechanical properties of electrodeposited Fe-Ni alloys in the Invar composition range , 2016 .

[10]  E. Lavernia,et al.  Influence of layer thickness on mechanical properties of multilayered NiFe samples processed by electrodeposition , 2016 .

[11]  I. Matsui,et al.  Effect of interstitial carbon on the mechanical properties of electrodeposited bulk nanocrystalline Ni , 2013 .

[12]  G. Verona-Rinati,et al.  Surface modification of austenitic steels by low‐temperature carburization , 2012 .

[13]  Yang Wei,et al.  Thermal Stability of Ni-Fe Alloy Foils Continuously Electrodeposited in a Fluorborate Bath , 2012 .

[14]  S. Ringer,et al.  Mechanical behaviors of as-deposited and annealed nanostructured Ni–Fe alloys , 2011 .

[15]  Mamoun Muhammed,et al.  Electrodeposition and characterization of nanocrystalline Ni-Fe alloys , 2011 .

[16]  Mark T. Kief,et al.  Properties of Ni1−xFex (0.1 < x < 0.9) and Invar (x = 0.64) alloys obtained by electrodeposition , 2010 .

[17]  B. Sheldon,et al.  Microstructural Origins of Saccharin-Induced Stress Reduction in Electrodeposited Ni , 2009 .

[18]  P. Kotula,et al.  Electrodeposited 80Ni–20Fe (Permalloy) as a structural material for high aspect ratio microfabrication , 2006 .

[19]  Hong Wang,et al.  Electroplating of low stress permalloy for MEMS , 2006 .

[20]  Young‐Chang Joo,et al.  Effect of saccharin addition on the microstructure of electrodeposited Fe–36 wt.% Ni alloy , 2005 .

[21]  G. D. Smith,et al.  THERMAL STABILITY OF ELECTRODEPOSITED NANOCRYSTALLINE NICKEL , 2002 .

[22]  U. Klement,et al.  Thermal Stability of Nanostructured Electrodeposits , 2002 .

[23]  Shailesh Gadad,et al.  Oxygen Incorporation during the Electrodeposition of Ni, Fe, and Ni‐Fe Alloys , 1998 .

[24]  J. Dual,et al.  Experimental determination of mechanical properties of Ni and Ni-Fe microbars , 1996 .

[25]  Edoardo Mazza,et al.  Experimental determination of mechanical properties of Ni and Ni-Fe microbars , 1995 .

[26]  U. Erb,et al.  Synthesis of bulk nanocrystalline nickel by pulsed electrodeposition , 1995, Journal of Materials Science.

[27]  G. Raichevski,et al.  The effect of sulphur and carbon inclusions on the corrosion resistance of electrodeposited Ni-Fe alloy coatings , 1987 .