A fatigue test method for Pb(Zr,Ti)O3 thin films by using MEMS-based self-sensitive piezoelectric microcantilevers

In the present study, we propose a new method for the fatigue test of lead zirconate titanate (PZT) thin films for MEMS devices by using self-sensitive piezoelectric microcantilevers developed in our previous study. We have deposited PZT thin films on SOI wafers and fabricated the microcantilevers through the MEMS microfabrication process. In the self-sensitive piezoelectric microcantilevers, the PZT thin films are separated in order to act as an actuator and a sensor. The fatigue characteristic of the PZT thin films can be evaluated by measuring the output voltage of the sensor as a function of time. When a sine wave of 20 Vpp and a dc bias of 10 V were applied to the PZT thin films for an actuator, the output voltage of the sensor fell down after 107 fatigue cycles. We have also investigated the influence of amplitude of the actuation sine wave and dc bias on the fatigue of the PZT thin films by using the proposed fatigue test method.

[1]  P. J. van Veldhoven,et al.  Ferroelectric properties and fatigue of PbZr0.51Ti0.49O3 thin films of varying thickness: Blocking layer model , 1994 .

[2]  Ryutaro Maeda,et al.  Degradation in the ferroelectric and piezoelectric properties of Pb(Zr,Ti)O3 thin films derived from a MEMS microfabrication process , 2007 .

[3]  Paul Muralt,et al.  Ferroelectric thin films for micro-sensors and actuators: a review , 2000 .

[4]  James F. Scott,et al.  A model for fatigue in ferroelectric perovskite thin films , 2000 .

[5]  Ryutaro Maeda,et al.  Sensing Property of Self-Sensitive Piezoelectric Microcantilever Utilizing Pb(Zr0.52/Ti0.48)O3 Thin Film and LaNiO3 Oxide Electrode , 2007 .

[6]  Ryutaro Maeda,et al.  Effect of multi-coating process on the orientation and microstructure of lead zirconate titanate (PZT) thin films derived by chemical solution deposition , 2005 .

[7]  T. Mihara,et al.  Polarization Fatigue Characteristics of Sol-Gel Ferroelectric Pb(Zr0.4Ti0.6)O3 Thin-Film Capacitors , 1994 .

[8]  D. Polla,et al.  PROCESSING AND CHARACTERIZATION OF PIEZOELECTRIC MATERIALS AND INTEGRATION INTO MICROELECTROMECHANICAL SYSTEMS , 1998 .

[9]  Jun Akedo,et al.  Effects of annealing and poling conditions on piezoelectric properties of Pb(Zr0.52,Ti0.48)O3 thick films formed by aerosol deposition method , 2002 .

[10]  Hidemi Takasu,et al.  Preparation of Pb(Zr,Ti)O3 Thin Films on Ir and IrO2 Electrodes , 1994 .

[11]  J.G. Smits,et al.  The constituent equations of piezoelectric heterogeneous bimorphs , 1991, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[12]  Ryutaro Maeda,et al.  The influence of DC bias on the displacement and sensor output of self-sensitive piezoelectric microcantilevers , 2008 .

[13]  J. J. Lee,et al.  Electrode contacts on ferroelectric Pb(ZrxTi1−x)O3 and SrBi2Ta2O9 thin films and their influence on fatigue properties , 1995 .

[14]  David Vanderbilt,et al.  Spontaneous polarization and piezoelectric constants of III-V nitrides , 1997 .