Structure and mechanical properties of new biomass-based nanocomposite: castor oil-based polyurethane reinforced with acetylated cellulose nanocrystal.

New nanocomposites consisting of a castor oil-based polyurethane matrix filled with acetylated cellulose nanocrystals (ACNs) were developed. The ACN exhibited improved dispersion in tetrahydrofuran as a blending medium, and reduced polarity as compared with unmodified cellulose nanocrystals, resulting in a high loading level of 25 wt% in the nanocomposite. As the ACN loading-level increased from 0% to 25%, the tensile strength and Young's modulus of the nanocomposites increased from 2.79 MPa to 10.41 MPa and from 0.98 MPa to 42.61 MPa, respectively. When the ACN loading-level was 10 wt%, the breaking elongation of the nanocomposites reached the maximum value of more than twice that of the polyurethane. The enhanced mechanical performance was primarily attributed to the formation of a three-dimensional ACN network and strong interfacial interactions between filler and matrix. This work produced new polyurethane-based nanocomposites containing modified cellulose nanocrystal with a high biomass content. Its high performance could contribute to potential applications.

[1]  A. Dufresne,et al.  Plasticized Starch/Tunicin Whiskers Nanocomposites. 1. Structural Analysis , 2000 .

[2]  Alain Dufresne,et al.  Cellulose nanocrystals reinforced poly(oxyethylene) , 2004 .

[3]  P. Chang,et al.  Simultaneous reinforcing and toughening: new nanocomposites of waterborne polyurethane filled with low loading level of starch nanocrystals , 2008 .

[4]  Alain Dufresne,et al.  Polysaccharide nano crystal reinforced nanocomposites , 2008 .

[5]  Sie Chin Tjong,et al.  STRUCTURAL AND MECHANICAL PROPERTIES OF POLYMER NANOCOMPOSITES , 2006 .

[6]  George Tsagaropoulos,et al.  Dynamic Mechanical Study of the Factors Affecting the Two Glass Transition Behavior of Filled Polymers. Similarities and Differences with Random Ionomers , 1995 .

[7]  J. Manson,et al.  Interpenetrating polymer networks from triglyceride oils containing special functional groups: A brief review1 , 1983 .

[8]  Qi Zhou,et al.  Strong Nanocomposite Reinforcement Effects in Polyurethane Elastomer with Low Volume Fraction of Cellulose Nanocrystals , 2011 .

[9]  Lynn A. Capadona,et al.  A versatile approach for the processing of polymer nanocomposites with self-assembled nanofibre templates. , 2007, Nature nanotechnology.

[10]  J. Cavaillé,et al.  New nanocomposite materials reinforced with cellulose whiskers in atactic polypropylene: effect of surface and dispersion characteristics. , 2005, Biomacromolecules.

[11]  C. Weder,et al.  Solid polymer electrolytes based on nanocomposites of ethylene oxide–epichlorohydrin copolymers and cellulose whiskers , 2004 .

[12]  Xiaodong Cao,et al.  One-pot polymerization, surface grafting, and processing of waterborne polyurethane-cellulose nanocrystal nanocomposites , 2009 .

[13]  A. Dufresne,et al.  Preparation of Cellulose Whiskers Reinforced Nanocomposites from an Organic Medium Suspension , 2004 .

[14]  A. Morin,et al.  Nanocomposites of Chitin Whiskers from Riftia Tubes and Poly(caprolactone) , 2002 .

[15]  P. Chang,et al.  Effects of polymer‐grafted natural nanocrystals on the structure and mechanical properties of poly(lactic acid): A case of cellulose whisker‐graft‐polycaprolactone , 2009 .

[16]  P. Chang,et al.  Surface acetylation of cellulose nanocrystal and its reinforcing function in poly(lactic acid) , 2011 .

[17]  Véronique Favier,et al.  Polymer Nanocomposites Reinforced by Cellulose Whiskers , 1995 .

[18]  D. K. Owens,et al.  Estimation of the surface free energy of polymers , 1969 .

[19]  G. Buschle-Diller,et al.  Enhancing the reactivity and strength of cotton fibers , 1992 .

[20]  A. Dufresne,et al.  Polysaccharide Microcrystals Reinforced Amorphous Poly(β-hydroxyoctanoate) Nanocomposite Materials , 1999 .

[21]  R. Dendievel,et al.  Viscoelastic properties of plasticized PVC reinforced with cellulose whiskers , 1999 .

[22]  L. Lucia,et al.  Cellulose nanocrystals: chemistry, self-assembly, and applications. , 2010, Chemical reviews.

[23]  K. Wei,et al.  Hydrogen bonding and mechanical properties in segmented montmorillonite/polyurethane nanocomposites of different hard segment ratios , 2001 .

[24]  Mehdi Hojjati,et al.  Review article: Polymer-matrix Nanocomposites, Processing, Manufacturing, and Application: An Overview , 2006 .

[25]  R. Atalla,et al.  Carbon-13 NMR spectra of cellulose polymorphs , 1980 .

[26]  Stuart J. Rowan,et al.  Bio-inspired mechanically-adaptive nanocomposites derived from cotton cellulose whiskers , 2010 .

[27]  Stuart J. Rowan,et al.  Stimuli-responsive mechanically adaptive polymer nanocomposites. , 2010, ACS applied materials & interfaces.

[28]  D. Tyler,et al.  Stimuli-Responsive Polymer Nanocomposites Inspired by the Sea Cucumber Dermis , 2008, Science.

[29]  A. Dufresne,et al.  Surface functionalization of cellulose by grafting oligoether chains , 2010 .

[30]  Kevin E. Shopsowitz,et al.  Free-standing mesoporous silica films with tunable chiral nematic structures , 2010, Nature.

[31]  Jin Sun,et al.  Biocompatible elastomer of waterborne polyurethane based on castor oil and polyethylene glycol with cellulose nanocrystals , 2012 .

[32]  Qiuju Wu,et al.  A high strength nanocomposite based on microcrystalline cellulose and polyurethane. , 2007, Biomacromolecules.

[33]  Qinglin Wu,et al.  Fabrication and properties of transparent polymethylmethacrylate/cellulose nanocrystals composites. , 2010, Bioresource technology.

[34]  T. Son,et al.  Thermal and Phase Behavior of Polyurethane Based on Chain Extender, 2,2-Bis-[4-(2-hydroxyethoxy)phenyl]propane , 1999 .

[35]  Hua Dong,et al.  New nanocomposite materials reinforced with flax cellulose nanocrystals in waterborne polyurethane. , 2007, Biomacromolecules.