Vibration energy harvesting of multifunctional carbon fibre composite laminate structures

A sustainable power supply for a wide range of applications, such as powering sensors for structural health monitoring and wireless sensoring nodes for data transmission and communication used in unmanned air vehicles, automobiles, renewable energy sectors, and smart city technologies, is targeted. This paper presents an experimental and numerical study that describes an innovative technique to harvest energy resulted from environmental vibrations. A piezoelectric energy harvester was integrated onto a carbon fibre reinforced polymer (CFRP) laminate structure using the co-curing method. The integrated composite with the energy harvester was lightweight, flexible and provided robust and reliable energy outcomes, which can be used to power different low-powered wireless sensing nodes. A normalised power density of 97  μW cm−3m−2s4 was obtained from resonance frequency of 46 Hz sinusoidal waves at amplitude of 0.2 g; while the representative environmental vibration waves in various applications (aerospace, automotive, machine and bridge infrastructure) were experimentally and numerically investigated to find out the energy that can be harvested by such a multifunctional composite structure. The results showed the energy harvested at different vibration input from various industrial sectors could be sufficient to power an autonomous structural health monitoring system and wireless communications by the designed composite structure.

[1]  Stephen R Hallett,et al.  Energy harvesting behaviour for aircraft composites structures using macro-fibre composite: Part I – Integration and experiment , 2017 .

[2]  R. B. Yates,et al.  Feasibility study of a vibration powered micro-electric generator , 1996 .

[3]  Daniel J. Inman,et al.  Use of piezoelectric energy harvesting devices for charging batteries , 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[4]  Guglielmo S. Aglietti,et al.  A review of multifunctional structure technology for aerospace applications , 2016 .

[5]  Dominique Siegert,et al.  Piezoelectric energy harvesting from traffic-induced bridge vibrations , 2013 .

[6]  Tao Jiang,et al.  Liquid‐Metal Electrode for High‐Performance Triboelectric Nanogenerator at an Instantaneous Energy Conversion Efficiency of 70.6% , 2015 .

[7]  Takaaki Ishii,et al.  Energy Flow Analysis in Piezoelectric Energy Harvesting Systems , 2010 .

[8]  Wei-Hsin Liao,et al.  Sensitivity Analysis and Energy Harvesting for a Self-Powered Piezoelectric Sensor , 2005 .

[9]  S. Beeby,et al.  Electromagnetic Energy Harvesting , 2009 .

[10]  Yu Jia,et al.  Maximizing Output Power in a Cantilevered Piezoelectric Vibration Energy Harvester by Electrode Design , 2015 .

[11]  Anantha Chandrakasan,et al.  Vibration-to-electric energy conversion , 2001, IEEE Trans. Very Large Scale Integr. Syst..

[12]  Daniel J. Inman,et al.  An investigation into the performance of macro-fiber composites for sensing and structural vibration applications , 2004 .

[13]  S. Beeby,et al.  Energy harvesting vibration sources for microsystems applications , 2006 .

[14]  Hongduo Zhao,et al.  Finite element analysis of Cymbal piezoelectric transducers for harvesting energy from asphalt pavement , 2010 .

[15]  Zhong Lin Wang.  Triboelectric nanogenerators as new energy technology for self-powered systems and as active mechanical and chemical sensors. , 2013, ACS nano.

[16]  Qian Zhao,et al.  A preliminary study on the highway piezoelectric power supply system , 2017 .

[17]  Libor Rufer,et al.  Dynamic simulation of an implemented electrostatic power micro-generator , 2005 .

[18]  Jeong Hun Kim,et al.  Piezoelectric polymer-based roadway energy harvesting via displacement amplification module , 2018 .

[19]  Elena Blokhina,et al.  Electrostatic Kinetic Energy Harvesting , 2016 .

[20]  Paul,et al.  Tracking Pitch Link Dynamic Loads with Energy Harvesting Wireless Sensors , 2007 .

[21]  Hao Wang,et al.  Energy harvesting technologies in roadway and bridge for different applications – A comprehensive review , 2018 .

[22]  Saibal Roy,et al.  Self-powered autonomous wireless sensor node using vibration energy harvesting , 2008 .

[23]  Jinsong Leng,et al.  A novel composite multi-layer piezoelectric energy harvester , 2018, Composite Structures.

[24]  Daniel J. Inman,et al.  Piezoelectric Energy Harvesting , 2011 .

[25]  J. L. Curiel-Sosa,et al.  Piezoelectric energy harvester composite under dynamic bending with implementation to aircraft wingbox structure , 2016 .

[26]  Karen Margaret Holford,et al.  Energy Harvesting for Aerospace Structural Health Monitoring Systems , 2012 .

[27]  Heath Hofmann,et al.  Adaptive piezoelectric energy harvesting circuit for wireless remote power supply , 2002 .

[28]  Lei Gu,et al.  Low-frequency piezoelectric energy harvesting prototype suitable for the MEMS implementation , 2011, Microelectron. J..

[29]  F. Ciampa,et al.  Characterisation of smart CFRP composites with embedded PZT transducers for nonlinear ultrasonic applications , 2018, Composite Structures.

[30]  Kenichi Soga,et al.  Real world assessment of an auto-parametric electromagnetic vibration energy harvester , 2017 .

[31]  Julien Penders,et al.  Energy Harvesting for Autonomous Wireless Sensor Networks , 2010, IEEE Solid-State Circuits Magazine.

[32]  Chee Wei Tan,et al.  A review of energy sources and energy management system in electric vehicles , 2013 .

[33]  Steve Beeby,et al.  A credit card sized self powered smart sensor node , 2011 .

[34]  Weiqing Yang,et al.  3D Stack Integrated Triboelectric Nanogenerator for Harvesting Vibration Energy , 2014 .

[35]  Daniel J. Inman,et al.  Vibration energy harvesting for unmanned aerial vehicles , 2008, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[36]  K. Najafi,et al.  Thinned-PZT on SOI process and design optimization for piezoelectric inertial energy harvesting , 2011, 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference.

[37]  F. Narita,et al.  Fabrication and impact output voltage characteristics of carbon fiber reinforced polymer composites with lead-free piezoelectric nano-particles , 2019, Materials Letters.

[38]  Seung-Hwan Chang,et al.  Performance evaluation of smart grid fabrics comprising carbon dry fabrics and PVDF ribbon sensors for structural health monitoring , 2019, Composites Part B: Engineering.

[39]  Congsi Wang,et al.  Multiphysics vibration FE model of piezoelectric macro fibre composite on carbon fibre composite structures , 2019, Composites Part B: Engineering.

[40]  Yuan Lin,et al.  Harvesting vibration energy by a triple-cantilever based triboelectric nanogenerator , 2013, Nano Research.

[41]  Neil M. White,et al.  An electromagnetic, vibration-powered generator for intelligent sensor systems , 2004 .