Preliminary analysis for the design of an energy-efficient and environmental sustainable integrated mobility system

The paper presents a new proposal for the design of a sustainable urban mobility system. Starting from an overview on the worldwide existing solutions and on the future trend, an innovative idea regarding the integration of two urban mobility systems is proposed: a metro transit system in underground and an electric and hybrid vehicles transport system on surface. The integration is aimed at the reduction of energy consumptions and environmental impact and at the optimization of the service thanks to the maximization of the transport bid in time. Moreover the proposed solution guarantees the minimum economic impact as a result of the optimization of the logistic and technological application of the existing electric power plant. The main results about the preliminary energy analysis, that is the basis of the project, are reported.

[1]  Massimo Ceraolo,et al.  A General Approach to Energy Optimization of Hybrid Electric Vehicles , 2008, IEEE Transactions on Vehicular Technology.

[2]  F. Foiadelli,et al.  Optimization of storage devices for regenerative braking energy in subway systems , 2006, 2006 IEEE Power Engineering Society General Meeting.

[3]  S. Abe,et al.  DC feeding system suitable for rolling stocks with re-generative braking system utilizing thyristor rectifier , 1993 .

[4]  Europäische Kommission,et al.  EU energy and transport in figures , 2010 .

[5]  Fushuan Wen,et al.  Bicriterion optimisation for traction substations in mass rapid transit systems using genetic algorithm , 1998 .

[6]  K. Al-Haddad,et al.  Reducing Subway's Energy , 2007, 2007 IEEE Canada Electrical Power Conference.

[7]  Clive Roberts,et al.  Optimal driving strategy for traction energy saving on DC suburban railways , 2007 .

[8]  F. Flinders,et al.  Energy savings through regenerative braking using retrofit converters , 1995, Proceedings of the 1995 IEEE/ASME Joint Railroad Conference.

[9]  U. Grasselli,et al.  A planning study on power systems of metro-transit transportation system , 2008, 2008 International Symposium on Power Electronics, Electrical Drives, Automation and Motion.

[10]  F. Foiadelli,et al.  Ultracapacitors application for energy saving in subway transportation systems , 2007, 2007 International Conference on Clean Electrical Power.

[11]  Ethniko Metsovio Polytechneio European energy and transport : trends to 2030 , 2003 .

[12]  D. Morrey,et al.  Automotive test drive cycles for emission measurement and real-world emission levels-a review , 2002 .

[13]  Xin Li,et al.  On the suitability of plug-in hybrid electric vehicle (PHEV) charging infrastructures based on wind and solar energy , 2009, 2009 IEEE Power & Energy Society General Meeting.

[14]  Chao-Shun Chen,et al.  Design of optimal coasting speed for saving social cost in Mass Rapid Transit systems , 2008, 2008 Third International Conference on Electric Utility Deregulation and Restructuring and Power Technologies.

[15]  S. Barsali,et al.  Dynamical Models of Lead-Acid Batteries: Implementation Issues , 2002, IEEE Power Engineering Review.

[16]  A. Maitra,et al.  Evaluation of the impact of plug-in electric vehicle loading on distribution system operations , 2009, 2009 IEEE Power & Energy Society General Meeting.

[17]  L Eudy,et al.  OVERVIEW OF ADVANCED TECHNOLOGY TRANSPORTATION, 2004 UPDATE , 2004 .

[18]  E.Mingozzi Emingozzi,et al.  Use of series-hybrid drive trains for railway traction , 2005 .

[19]  M. Steiner,et al.  Energy storage system with ultracaps on board of railway vehicles , 2007, 2007 European Conference on Power Electronics and Applications.

[20]  Andrew Burke Present Status and Marketing Prospects of the Emerging Hybrid-Electric and Diesel Technologies to Reduce CO2 Emissions of New Light-Duty Vehicles in California , 2004 .

[21]  G. Andersson,et al.  Demand Management of Grid Connected Plug-In Hybrid Electric Vehicles (PHEV) , 2008, 2008 IEEE Energy 2030 Conference.

[22]  Andrew F. Burke,et al.  Batteries and Ultracapacitors for Electric, Hybrid, and Fuel Cell Vehicles , 2007, Proceedings of the IEEE.

[23]  Regina Lamedica,et al.  Experimental assessment of energy saving due to trains regenerative braking in an electrified subway line , 1997, 1997 IEEE Industrial and Commercial Power Systems Technical Conference. Conference Record.

[24]  Huei Peng,et al.  Modeling and Control of a Power-Split Hybrid Vehicle , 2008, IEEE Transactions on Control Systems Technology.