An elastic-plastic finite-element analysis of the J-resistance curve using a CTOD criterion

The fracture process in compact and bend specimens was simulated using a two-dimensional finite-element analysis of the J-resistance (J-R) curve and a CTOD criterion. The J-R curves were calculated from the numerical results for each specimen type using several different methods. In general, the J-R curves obtained for the bend specimens were found to be higher than those for the compact specimens, especially beyond maximum load. However, below the maximum load, the modified deformation theory of plasticity and the contour-integral J(r) method resulted in very similar J-R curves for both specimen types.