Effects of Bi and Cu addition on mechanical properties of Sn9Zn alloy and interfacial intermetallic growth with Ni substrate

[1]  Xin Zhang,et al.  Study on the effects of Ag addition on the mechanical properties and oxidation resistance of Sn–Zn lead-free solder alloy by high-throughput method , 2023, Journal of Materials Science: Materials in Electronics.

[2]  Zhihui Zhang,et al.  Nanoindentation Creep Behavior of Nanocrystalline Ni and Ni-20 Wt.% Fe Alloy and Underlying Mechanisms Revealed by Apparent Activation Volumes , 2022, SSRN Electronic Journal.

[3]  Yuting Wei,et al.  Effects of various second phase ratios and contents on microstructure and mechanical properties of eutectic Sn58Bi alloy , 2022, Materials & Design.

[4]  Zhi-shui Yu,et al.  Effects of doping trace Ni element on interfacial behavior of Sn/Ni (polycrystal/single-crystal) joints , 2021, Soldering & Surface Mount Technology.

[5]  Phairote Sungkhaphaitoon,et al.  Influence of bismuth on microstructure, thermal properties, mechanical performance, and interfacial behavior of SAC305-xBi/Cu solder joints , 2021 .

[6]  Xueliang Wang,et al.  Elastic recovery induced strengthening effect in copper/ multilayer-graphene interface regions revealed by instrumental nanoindentation , 2021, Composites Part B: Engineering.

[7]  J. Sharma,et al.  Structural, Thermal and Wetting Characteristics of Novel Low Bi-Low Ag Containing Sn–x.Ag–0.7Cu–1.0Bi (x = 0.5 to 1.5) Alloys for Electronic Application , 2020, Metals and Materials International.

[8]  Yingxia Liu,et al.  The effect of Ag on the growth of intermetallics at the interface of Sn5Zn/Cu interconnects , 2020 .

[9]  Yingxia Liu,et al.  Effects of minor alloying with Ge and In on the interfacial microstructure between Zn–Sn solder alloy and Cu substrate , 2020 .

[10]  Wenbo Zhu,et al.  Improved microstructure and mechanical properties for SnBi solder alloy by addition of Cr powders , 2019, Journal of Alloys and Compounds.

[11]  S. Ji,et al.  Effect of Bi on the microstructure and mechanical properties of Sn-Zn alloys processed by rolling , 2018 .

[12]  Y. C. Yang,et al.  Microstructure and interfacial reaction of Sn–Zn–x(Al,Ag) near-eutectic solders on Al and Cu substrates , 2014, Journal of Materials Science: Materials in Electronics.

[13]  A. E. Hammad,et al.  Enhancing mechanical response of hypoeutectic Sn–6.5Zn solder alloy using Ni and Sb additions , 2013 .

[14]  Wislei R. Osório,et al.  Microstructure and mechanical properties of Sn–Bi, Sn–Ag and Sn–Zn lead-free solder alloys , 2013 .

[15]  John Hald,et al.  High-temperature lead-free solder alternatives , 2011 .

[16]  S. Xue,et al.  Properties and microstructure of Sn-9Zn lead-free solder alloy bearing Pr , 2011 .

[17]  S. Xue,et al.  Effects of rare earth element Nd on the solderability and microstructure of Sn–Zn lead-free solder , 2011 .

[18]  Feng Gao,et al.  Tensile properties and wettability of SAC0307 and SAC105 low Ag lead-free solder alloys , 2011 .

[19]  A. E. Hammad,et al.  Effects of small addition of Ag and/or Cu on the microstructure and properties of Sn–9Zn lead-free solders , 2010 .

[20]  S. Xue,et al.  Investigation on properties of Ga to Sn–9Zn lead-free solder , 2010 .

[21]  Zainal Arifin Ahmad,et al.  Effect of Bi addition on the activation energy for the growth of Cu5Zn8 intermetallic in the Sn–Zn lead-free solder , 2010 .

[22]  Anmin Hu,et al.  Depressing effect of 0.1 wt.% Cr addition into Sn–9Zn solder alloy on the intermetallic growth with Cu substrate during isothermal aging , 2010 .

[23]  Fu Guo,et al.  Effect of phosphorus element on the comprehensive properties of Sn–Cu lead-free solder , 2010 .

[24]  Sheng-lin Yu,et al.  Effects of cerium on Sn-Ag-Cu alloys based on finite element simulation and experiments , 2009 .

[25]  K. Suganuma,et al.  High-temperature lead-free solders: Properties and possibilities , 2009 .

[26]  Sinn-wen Chen,et al.  Thermodynamic properties and phase equilibria of Sn–Bi–Zn ternary alloys , 2008 .

[27]  D. Soares,et al.  Thermodynamic assessment of the Bi–Sn–Zn System , 2007 .

[28]  Wei-Kai Liou,et al.  Effect of Cu addition on interfacial reactions between Sn-9Zn lead-free solder and Ni substrate , 2007 .

[29]  Yangshan Sun,et al.  Properties of low melting point Sn–Zn–Bi solders , 2005 .

[30]  M. Goto,et al.  Role of trace elements on tensile behavior of accumulative roll-bonded pure copper , 2005 .

[31]  D. Q. Yu,et al.  Investigation of interfacial microstructure and wetting property of newly developed Sn–Zn–Cu solders with Cu substrate , 2004 .

[32]  Kojiro F. Kobayashi,et al.  Joint strength and interfacial microstructure between Sn–Ag–Cu and Sn–Zn–Bi solders and Cu substrate , 2004 .

[33]  Nikhilesh Chawla,et al.  The effects of cooling rate on microstructure and mechanical behavior of Sn-3.5Ag solder , 2003 .

[34]  Xingjun Liu,et al.  Thermodynamic calculation of phase equilibria of the Bi-Sn-Zn system , 2000 .

[35]  J. Glazer.  Microstructure and mechanical properties of Pb-free solder alloys for low-cost electronic assembly: A review , 1994 .

[36]  Huifen. Chen,et al.  New lead-free, Sn-Zn-In solder alloys , 1994 .

[37]  D. Frear,et al.  Intermetallic growth and mechanical behavior of low and high melting temperature solder alloys , 1994 .

[38]  Zbigniew Moser,et al.  The Sn−Zn (Tin-Zinc) system , 1985 .

[39]  John C. Slater,et al.  Atomic Radii in Crystals , 1964 .

[40]  Jeff Punch,et al.  Pb-free solder—microstructural, material reliability, and failure relationships , 2020 .

[41]  S. Xue,et al.  Development of Sn–Zn lead-free solders bearing alloying elements , 2010 .

[42]  Lawrence H. Bennett,et al.  Binary alloy phase diagrams , 1986 .