Composite sorbent of methanol “LiCl in mesoporous silica gel” for adsorption cooling: Dynamic optimization

A novel composite sorbent of methanol “LiCl in mesoporous silica gel” has recently been proposed for AC (adsorption cooling). Its testing in a lab-scale adsorption chiller resulted in the specific cooling power of 210–290 W/kg and the cooling COP of 0.32–0.4. Although these values are rather encouraging, a room for their enhancement still exists. The aim of this paper was a dynamic optimization of the composite performance in AC cycles. Dynamics of methanol sorption on loose grains of the LiCl/silica composites was studied by a Large Temperature Jump method under typical conditions of AC cycle. Effects of number of the sorbent layers, salt content, grain size and cycle boundary temperatures were studied. Physico-chemical processes in the three-phase system (salt, solution, vapor) were shown to be quite complex and can strongly affect the dynamics of methanol ad-/desorption. Several obstacles which can retard the sorption were analyzed. Appropriate recommendations on improving the cycle dynamics, which concern optimal conversion degree, salt content and relative durations of ad- and desorption phases, were made.

[1]  J. J. Guilleminot,et al.  Adsorptive solar powered ice maker: experiments and model , 2000 .

[2]  Yury I. Aristov,et al.  Novel Materials for Adsorptive Heat Pumping and Storage: Screening and Nanotailoring of Sorption Properties , 2007 .

[3]  H. Z. Hassan,et al.  Simulation of an adsorption solar cooling system , 2011 .

[4]  B. Dawoud,et al.  A new methodology of studying the dynamics of water sorption/desorption under real operating conditions of adsorption heat pumps: Experiment , 2008 .

[5]  Sheng Li,et al.  Study on cyclic characteristics of silica gel–water adsorption cooling system driven by variable heat source , 2009 .

[6]  K. T. Iskakov,et al.  An 1 H NMR Microimaging Study of Water Vapor Sorption by Individual Porous Pellets , 2000 .

[7]  A. Freni,et al.  Influence of Characteristics of Methanol Sorbents “Salts in Mesoporous Silica” on the Performance of Adsorptive Air Conditioning Cycle , 2007 .

[8]  Yuri I. Aristov,et al.  Novel sorbents of ethanol “salt confined to porous matrix” for adsorptive cooling , 2010 .

[9]  A. Freni,et al.  Reallocation of adsorption and desorption times for optimisation of cooling cycles , 2012 .

[10]  Ruzhu Wang,et al.  Design, simulation and performance of a waste heat driven adsorption ice maker for fishing boat , 2006 .

[11]  Ning Pan,et al.  A new approach to analysis and optimization of evaporative cooling system I: Theory , 2010 .

[12]  K. Sumathy,et al.  Heat and mass transfer in the adsorbent of a solar adsorption cooling system with glass tube insulation , 2003 .

[13]  Qun Cui,et al.  Environmentally benign working pairs for adsorption refrigeration , 2005 .

[14]  Xiaoqiang Zhai,et al.  Development of solar thermal technologies in China , 2010 .

[15]  Etienne Wurtz,et al.  Comparison between the conventional and recirculation modes in desiccant cooling cycles and deriving critical efficiencies of components , 2010 .

[16]  F. C. Brown,et al.  A Heat Pump and Thermal Storage System for Solar Heating and Cooling Based on the Reaction of Calcium Chloride and Methanol Vapor , 1980 .

[17]  Lun Zhang,et al.  Momentum and heat transfer in the adsorbent of a waste-heat adsorption cooling system , 1999 .

[18]  A. Freni,et al.  Composite Sorbent of Methanol “Lithium Chloride in Mesoporous Silica Gel” for Adsorption Cooling Machines: Performance and Stability Evaluation , 2009 .

[19]  J. J. Guilleminot,et al.  Design of an experimental solar-powered, solid-adsorption ice maker , 1986 .

[20]  A. Freni,et al.  Composites “lithium halides in silica gel pores”: Methanol sorption equilibrium , 2008 .

[21]  Yuri I. Aristov,et al.  The effect of cycle boundary conditions and adsorbent grain size on the water sorption dynamics in adsorption chillers , 2010 .