Suspension thermal spraying of hydroxyapatite: microstructure and in vitro behaviour.

[1]  M. Krane,et al.  Column Formation in Suspension Plasma-Sprayed Coatings and Resultant Thermal Properties , 2011 .

[2]  B. Bonferroni,et al.  Microstructure and in vitro behaviour of 45S5 bioglass coatings deposited by high velocity suspension flame spraying (HVSFS) , 2011, Journal of materials science. Materials in medicine.

[3]  R. Mcpherson.  A model for the thermal conductivity of plasma-sprayed ceramic coatings , 1984 .

[4]  K. Khor,et al.  Significance of melt-fraction in HVOF sprayed hydroxyapatite particles, splats and coatings. , 2004, Biomaterials.

[5]  R. Gadow,et al.  Properties of High Velocity Suspension Flame Sprayed (HVSFS) TiO2 coatings , 2009 .

[6]  Khiam Aik Khor,et al.  PHASE TRANSFORMATIONS IN PLASMA SPRAYED HYDROXYAPATITE COATINGS , 1999 .

[7]  C. James,et al.  Long-term follow-up of a hydroxyapatite ceramic-coated threaded cup: an analysis of survival and fixation at up to 15 years. , 2007, The Journal of arthroplasty.

[8]  R. Gadow,et al.  High-Velocity Suspension Flame Sprayed (HVSFS) Hydroxyapatite Coatings for Biomedical Applications , 2012, Journal of Thermal Spray Technology.

[9]  K. Rungcharassaeng,et al.  Peri-implant tissue response of immediately loaded, threaded, HA-coated implants: 1-year results. , 2002, The Journal of prosthetic dentistry.

[10]  G. Georgiou,et al.  Hydroxyapatite, fluor-hydroxyapatite and fluorapatite produced via the sol-gel method: bonding to titanium and scanning electron microscopy. , 2013, Dental materials : official publication of the Academy of Dental Materials.

[11]  J. Nohava,et al.  Interesting aspects of indentation and scratch methods for characterization of thermally-sprayed coatings , 2010 .

[12]  H. Farnoush,et al.  Sol–gel derived nanohydroxyapatite film on friction stir processed Ti–6Al–4V substrate , 2013 .

[13]  M. Fitzpatrick,et al.  Neutron diffraction residual strain measurements in nanostructured hydroxyapatite coatings for orthopaedic implants. , 2011, Journal of the mechanical behavior of biomedical materials.

[14]  P. Chandran,et al.  Periprosthetic Bone Remodeling after 12 Years Differs in Cemented and Uncemented Hip Arthroplasties , 2012, Clinical orthopaedics and related research.

[15]  Michael C. Mosier,et al.  Hydroxyapatite (HA) coating appears to be of benefit for implant durability of tibial components in primary total knee arthroplasty , 2011, Acta orthopaedica.

[16]  B. Marple,et al.  High weibull modulus HVOF titania coatings , 2003 .

[17]  E. Dongmo,et al.  Numerical approach and optimization of the combustion and gas dynamics in High Velocity Suspension Flame Spraying (HVSFS) , 2009 .

[18]  J. Jansen,et al.  Calcium phosphate coatings for medical implants , 1998, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[19]  L. Visai,et al.  Titanium Oxide Antibacterial Surfaces in Biomedical Devices , 2011, The International journal of artificial organs.

[20]  H. N. Cheang,et al.  Surface characteristics and dissolution behavior of plasma-sprayed hydroxyapatite coating. , 2002, Journal of biomedical materials research.

[21]  T. Lui,et al.  Effect of crystallization on the bonding strength and failures of plasma-sprayed hydroxyapatite , 2007 .

[22]  C. C. Berndt,et al.  The variability in strength of thermally sprayed coatings , 1988 .

[23]  C. Berndt,et al.  Biomedical Application of Apatites , 2002 .

[24]  C. Berndt,et al.  Thermal Analysis of Amorphous Phases in Hydroxyapatite Coatings , 2005 .

[25]  A. Sola,et al.  Deposition mechanisms in high velocity suspension spraying: Case study for two bioactive materials , 2012 .

[26]  T. Lui,et al.  Microstructural self-healing effect of hydrothermal crystallization on bonding strength and failure mechanism of hydroxyapatite coatings , 2008 .

[27]  E. Skwarek,et al.  The study of the properties of the hydroxyapatite/electrolyte interface , 2009 .

[28]  R. Gadow,et al.  Microstructural and in vitro characterisation of high-velocity suspension flame sprayed (HVSFS) bioactive glass coatings , 2009 .

[29]  C. Y. Ho,et al.  Thermophysical properties of matter - the TPRC data series. Volume 14. Master index - to materials and properties. (Reannouncement). Data book , 1979 .

[30]  W. Capello,et al.  Hydroxyapatite coated femoral components , 2015 .

[31]  Rainer Gadow,et al.  High velocity suspension flame sprayed (HVSFS) potassium-based bioactive glass coatings with and without TiO2 bond coat , 2012 .

[32]  R. Cuscó,et al.  Differentiation between hydroxyapatite and β-tricalcium phosphate by means of μ-Raman spectroscopy , 1998 .

[33]  D. D’Lima,et al.  Hydroxyapatite-Coated Femoral Stem Survivorship at 10 Years , 2005 .

[34]  K. A. Khora,et al.  Significance of melt-fraction in HVOF sprayed hydroxyapatite particles, splats and coatings , 2003 .

[35]  尹志坚,et al.  Evaluating microhardness of plasma sprayed Al2O3 coatings using Vickers indentation techniques , 2007 .

[36]  R. Gadow,et al.  Microstructural and Tribological Investigation of High-Velocity Suspension Flame Sprayed (HVSFS) Al2O3 Coatings , 2009 .

[37]  T. Albrektsson,et al.  Osteoinduction, osteoconduction and osseointegration , 2001, European Spine Journal.

[38]  Xuanyong Liu,et al.  Effect of hydroxyapatite coating crystallinity on dissolution and osseointegration in vivo. , 2005, Journal of biomedical materials research. Part A.

[39]  R. Heimann.  Characterization of as‐plasma‐sprayed and incubated hydroxyapatite coatings with high resolution techniques , 2009 .

[40]  O. Reikerås,et al.  Long-term results of HA coated threaded versus HA coated hemispheric press fit cups: 287 hips followed for 11 to 16 years , 2006, Archives of Orthopaedic and Trauma Surgery.

[41]  T. Lei,et al.  Osteoblastic cell response on biphasic fluorhydroxyapatite/strontium-substituted hydroxyapatite coatings. , 2014, Journal of biomedical materials research. Part A.

[42]  Young-yool Chung,et al.  Measurement of extent of bone ongrowth and hydroxyapatite absorption in retrieved acetabular cups , 2008, Journal of orthopaedic science : official journal of the Japanese Orthopaedic Association.

[43]  M. Ameil,et al.  Survival analysis at 10 years of a cohort of 297 atlas total hip prostheses , 2007, European Journal of Orthopaedic Surgery & Traumatology.

[44]  L. Palm,et al.  Hydroxyapatite coating improves 8- to 10-year performance of the link RS cementless femoral stem. , 2002, The Journal of arthroplasty.

[45]  M. Manley,et al.  Fixation Choices for Primary Hip and Knee Applications , 2006 .

[46]  W. Capello,et al.  Hydroxyapatite-coated Femoral Components: 15-Year Minimum Followup , 2006, Clinical orthopaedics and related research.

[47]  Sen Yang,et al.  Adhesion strength of plasma-sprayed hydroxyapatite coatings on laser gas-nitrided pure titanium , 2009 .

[48]  E. Liarokapis,et al.  Micro-Raman and FTIR studies of synthetic and natural apatites. , 2007, Biomaterials.

[49]  Hua Li,et al.  HVOF spraying of nanostructured hydroxyapatite for biomedical applications , 2005 .

[50]  R. Gadow,et al.  Effect of the suspension composition on the microstructural properties of high velocity suspension flame sprayed (HVSFS) Al2O3 coatings , 2010 .

[51]  A. Sosna,et al.  Hydroxyapatite porous coating and the osteointegration of the total hip replacement , 2007, Archives of Orthopaedic and Trauma Surgery.

[52]  K. Khor,et al.  An in vitro investigation of plasma sprayed hydroxyapatite (HA) coatings produced with flame-spheroidized feedstock. , 2002, Biomaterials.

[53]  R. Petit.  The use of hydroxyapatite in orthopaedic surgery: A ten-year review , 1999, European Journal of Orthopaedic Surgery & Traumatology.

[54]  C. Qiu,et al.  Manufacturing Process of Nanostructured Alumina Coatings by Suspension Plasma Spraying , 2009 .

[55]  P. K. Panigrahi,et al.  Room temperature synthesis of highly hemocompatible hydroxyapatite, study of their physical properties and spectroscopic correlation of particle size. , 2010, Nanoscale.

[56]  P. Fauchais,et al.  Phenomena Involved in Suspension Plasma Spraying Part 2: Zirconia Particle Treatment and Coating Formation , 2006 .

[57]  Gwo‐Jaw Wang,et al.  Eight-year results of hydroxyapatite-coated hip arthroplasty. , 2006, The Journal of arthroplasty.

[58]  R. Heimann,et al.  Laser‐Raman and Nuclear Magnetic Resonance (NMR) studies on plasma‐sprayed hydroxylapatite coatings: Influence of bioinert bond coats on phase composition and resorption kinetics in simulated body fluid , 2003 .

[59]  R. Gadow,et al.  Advances in High Velocity Suspension Flame Spraying (HVSFS) , 2009 .

[60]  Jingchuan Zhu,et al.  Optimal design and fabrication of hydroxyapatite-Ti asymmetrical functionally graded biomaterial , 2003 .

[61]  Rainer Gadow,et al.  Modeling of Combustion as well as Heat, Mass, and Momentum Transfer During Thermal Spraying by HVOF and HVSFS , 2009 .

[62]  D. Tarnow,et al.  Five-year prospective clinical evaluation of highly crystalline HA MP-1-coated dental implants. , 2008, The Journal of oral implantology.

[63]  H. Rezaie,et al.  In vitro antibacterial evaluation of sol-gel-derived Zn-, Ag-, and (Zn + Ag)-doped hydroxyapatite coatings against methicillin-resistant Staphylococcus aureus. , 2013, Journal of biomedical materials research. Part A.

[64]  B. Cetegen,et al.  Modeling of liquid ceramic precursor droplets in a high velocity oxy-fuel flame jet , 2008 .

[65]  O. Reikerås,et al.  Excellent results with femoral revision surgery using an extensively hydroxyapatite-coated stem: 59 patients followed for 10–16 years , 2006, Acta orthopaedica.

[66]  M. Chu,et al.  Pressureless sintering of nanocrystalline hydroxyapatite at different temperatures , 2010 .

[67]  若月達也.  Hydroxyapatite , 2023, Reactions Weekly.

[68]  E. Wintermantel,et al.  Chemical and morphological changes of vacuum-plasma-sprayed hydroxyapatite coatings during immersion in simulated physiological solutions , 2005 .

[69]  M. Froimson,et al.  Hydroxyapatite-Coated, Tapered Titanium Hip Arthroplasty , 2009 .

[70]  J. Breme,et al.  Development of a titanium alloy suitable for an optimized coating with hydroxyapatite. , 1995, Biomaterials.

[71]  Y. Ha,et al.  Cementless bipolar hemiarthroplasty using a hydroxyapatite-coated long stem for osteoporotic unstable intertrochanteric fractures. , 2011, The Journal of arthroplasty.

[72]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[73]  S. Best,et al.  Structural analysis of Si-substituted hydroxyapatite: zeta potential and X-ray photoelectron spectroscopy , 2002, Journal of materials science. Materials in medicine.

[74]  J. Jansen,et al.  Synthesis and application of nanostructured calcium phosphate ceramics for bone regeneration. , 2012, Journal of biomedical materials research. Part B, Applied biomaterials.

[75]  G. Albertini,et al.  Plasma sprayed hydroxyapatite coatings from nanostructured granules , 2008 .

[76]  K A Gross,et al.  Material fundamentals and clinical performance of plasma-sprayed hydroxyapatite coatings: a review. , 2001, Journal of biomedical materials research.

[77]  C. Rey,et al.  Hydroxyapatite coating on titanium by a low energy plasma spraying mini-gun , 2012 .

[78]  Miloš B. Volf,et al.  Mathematical approach to glass , 1988 .

[79]  F. Ren,et al.  Part II: fracture strength and elastic modulus as a function of porosity for hydroxyapatite and other brittle materials. , 2012, Journal of the mechanical behavior of biomedical materials.

[80]  L. Rimondini,et al.  Osteointegration of titanium and hydroxyapatite rough surfaces in healthy and compromised cortical and trabecular bone: in vivo comparative study on young, aged, and estrogen‐deficient sheep , 2007, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[81]  C. Ranawat,et al.  The Hydroxyapatite-Tapered Stem: Any Added Value? , 2011 .

[82]  H. Owada,et al.  High-temperature stability of hydroxyl ions in yttrium-substituted oxyhydroxyapatites , 1991 .

[83]  K. Søballe,et al.  Inferior Survival of Hydroxyapatite versus Titanium-coated Cups at 15 Years , 2009, Clinical orthopaedics and related research.

[84]  Jianguo Li,et al.  Thermal expansion of hot isostatically pressed hydroxyapatite , 1994 .

[85]  Shin-Yoon Kim,et al.  Early Failure of Hemispheric Hydroxyapatite-coated Acetabular Cups , 2006, Clinical orthopaedics and related research.

[86]  Tadashi Kokubo,et al.  How useful is SBF in predicting in vivo bone bioactivity? , 2006, Biomaterials.

[87]  S. Saber-Samandari,et al.  Amorphous calcium phosphate offers improved crack resistance: a design feature from nature? , 2011, Acta biomaterialia.

[88]  T. Lee,et al.  Effect of post vacuum heating on the microstructural feature and bonding strength of plasma-sprayed hydroxyapatite coatings , 2006 .

[89]  J. Vidalain.  Twenty-year results of the cementless Corail stem , 2011, International Orthopaedics.

[90]  H. F. Morris,et al.  Hydroxyapatite-coated implants: a case for their use. , 1998, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[91]  C. Doyle,et al.  Plasma sprayed hydroxyapatite coatings on titanium substrates. Part 2: optimisation of coating properties. , 1998, Biomaterials.

[92]  J. Jansen,et al.  Thin Calcium Phosphate Coatings for Medical Implants , 2009 .

[93]  A. Wennerberg,et al.  Different patterns of bone fixation with hydroxyapatite and resorbable CaP coatings in the rabbit tibia at 6, 12, and 52 weeks. , 2011, Journal of biomedical materials research. Part B, Applied biomaterials.

[94]  P. Fauchais,et al.  Phenomena Involved in Suspension Plasma Spraying Part 1: Suspension Injection and Behavior , 2006 .

[95]  Robert B. Heimann,et al.  Thermal spraying of biomaterials , 2006 .

[96]  J. Goosen,et al.  Excellent results from proximally HA-coated femoral stems with a minimum of 6 years follow-up , 2005, Acta orthopaedica.

[97]  Saeed Saber-Samandari,et al.  Evaluation of commercial implants with nanoindentation defines future development needs for hydroxyapatite coatings. , 2010, Journal of biomedical materials research. Part B, Applied biomaterials.

[98]  L. Pawłowski,et al.  Numerical simulation of hydroxyapatite powder behaviour in plasma jet , 2004 .

[99]  K. Wong,et al.  Early failure of smooth hydroxyapatite-coated press-fit acetabular cup--7 years of follow-up. , 2005, The Journal of arthroplasty.

[100]  D. C. Agrawal,et al.  Sol–gel derived hydroxyapatite coatings on titanium substrates , 2011 .

[101]  F. Najafi,et al.  Preparation and characterization of multi-walled carbon nanotube/hydroxyapatite nanocomposite film dip coated on Ti-6Al-4V by sol-gel method for biomedical applications: an in vitro study. , 2013, Materials science & engineering. C, Materials for biological applications.

[102]  Takashi Nakamura,et al.  Process and kinetics of bonelike apatite formation on sintered hydroxyapatite in a simulated body fluid. , 2005, Biomaterials.

[103]  Rainer Gadow,et al.  High-Velocity Suspension Flame Spraying (HVSFS), a new approach for spraying nanoparticles with hypersonic speed , 2006 .

[104]  Toshio Uehara,et al.  Histological evidence of osseointegration in human retrieved fractured hydroxyapatite-coated screw-type implants: a case report. , 2004, Clinical oral implants research.

[105]  A. Riis,et al.  Effect of hydroxyapatite coating on risk of revision after primary total hip arthroplasty in younger patients: Findings from the Danish Hip Arthroplasty Registry , 2007, Acta orthopaedica.

[106]  Sam Zhang,et al.  ADHESION STRENGTH OF SOL-GEL DERIVED FLUORIDATED HYDROXYAPATITE COATINGS , 2006 .

[107]  M. Hamdia,et al.  Sintering properties of hydroxyapatite powders prepared using different methods , 2012 .

[108]  L. Nordsletten,et al.  A prospective randomized study comparing electrochemically deposited hydroxyapatite and plasma-sprayed hydroxyapatite on titanium stems , 2011, Acta orthopaedica.

[109]  K. Khor,et al.  Plasma-sprayed hydroxyapatite (HA) coatings with flame-spheroidized feedstock: microstructure and mechanical properties. , 2000, Biomaterials.

[110]  J. Laureyns,et al.  Advanced Microstructural Study of Suspension Plasma Sprayed Hydroxyapatite Coatings , 2010 .

[111]  Rainer Gadow,et al.  Hydroxyapatite coatings for biomedical applications deposited by different thermal spray techniques , 2010 .

[112]  C. Doyle,et al.  Plasma sprayed hydroxyapatite coatings on titanium substrates. Part 1: Mechanical properties and residual stress levels. , 1998, Biomaterials.

[113]  F. Carinci,et al.  Five-year outcome of 111 immediate nonfunctional single restorations. , 2006, Journal of Oral Implantology.

[114]  F. S. Baker,et al.  Temperature-programmed dehydration of hydroxyapatite , 1979 .

[115]  B. Del Curto,et al.  Electrochemical surface modifications of titanium and titanium alloys for biomedical applications , 2012 .

[116]  A. L. Patterson.  The Scherrer Formula for X-Ray Particle Size Determination , 1939 .