Mechanisms and Influence of Casing Shear Deformation near the Casing Shoe, Based on MFC Surveys during Multistage Fracturing in Shale Gas Wells in Canada

Casing shear deformation has become a serious problem in the development of shale gas fields, which is believed to be related to fault slipping caused by multistage fracturing, and the evaluation of the reduction of a casing’s inner diameter is key. Although many fault slipping models have been published, most of them have not taken the fluid-solid-heat coupling effect into account, and none of the models could be used to calculate the reduction of a casing’s inner diameter. In this paper, a new 3D finite element model was developed to simulate the progress of fault slipping, taking the fluid-solid-heat coupling effect during fracturing into account. For the purpose of increasing calculation accuracy, the elastoplastic constitutive relations of materials were considered, and the solid-shell elements technique was used. The reduction of the casing’s inner diameter along the axis was calculated and the calculation results were compared with the measurement results of multi-finger caliper (MFC) surveys. A sensitivity analysis was conducted, and the influences of slip distance, casing internal pressure, thickness of production and intermediate casing, and the mechanical parameters of cement sheath on the reduction of a casing’s inner diameter in the deformed segment were analyzed. The numerical analysis results showed that decreasing the slip distance, maintaining high pressure, decreasing the Poisson ratio of cement sheath, and increasing casing thickness were beneficial to protect the integrity of the casing. The numerical simulation results were verified by comparison to the shape of MFC measurement results, and had an accuracy up to 90.17%. Results from this study are expected to provide a better understanding of casing shear deformation, and a prediction method of a casing’s inner diameter after fault slipping in multistage fracturing wells.

[1]  Jun Li,et al.  Numerical investigation for different casing deformation reasons in Weiyuan-Changning shale gas field during multistage hydraulic fracturing , 2017 .

[2]  R. Goodman Introduction to Rock Mechanics , 1980 .

[3]  M. Soltanzadeh,et al.  A Regional Geomechanical Study of the Duvernay Formation in Alberta , Canada , 2015 .

[4]  A. Eustes,et al.  A Causation Investigation for Observed Casing Failures Occurring During Fracturing Operations , 2017 .

[5]  Jingen Deng,et al.  Investigation of casing deformation during hydraulic fracturing in high geo-stress shale gas play , 2017 .

[6]  J. Gallop,et al.  Can Seismic Inversion Be Used for Geomechanics? A Casing Deformation Example , 2018 .

[7]  H. Kanamori,et al.  A moment magnitude scale , 1979 .

[8]  Zhanghua Lian,et al.  A study on casing deformation failure during multi-stage hydraulic fracturing for the stimulated reservoir volume of horizontal shale wells , 2015 .

[9]  Yichi Zhang,et al.  Coupled Thermo-Hydro-Mechanical-Chemical Modeling of Water Leak-off Process during Hydraulic Fracturing in Shale Gas Reservoirs , 2017 .

[10]  Jun Li,et al.  Numerical simulation of casing deformation during volume fracturing of horizontal shale gas wells , 2019, Journal of Petroleum Science and Engineering.

[11]  David W. Eaton,et al.  Fault activation by hydraulic fracturing in western Canada , 2016, Science.

[12]  Fayaz R. Rofooei,et al.  Experimental and finite element study of the reverse faulting effects on buried continuous steel gas pipelines , 2016 .

[13]  Liehui Zhang,et al.  An Analytical Flow Model for Heterogeneous Multi-Fractured Systems in Shale Gas Reservoirs , 2018, Energies.

[14]  Craig L. Cipolla,et al.  A Practical Guide to Interpreting Microseismic Measurements , 2011 .

[15]  Lin Shi,et al.  Mechanism of casing deformation in the Changning–Weiyuan national shale gas demonstration area and countermeasures , 2017 .

[16]  D. Gao,et al.  Mechanical behavior of casing crossing slip formation in waterflooding oilfields , 2017, Journal of Petroleum Science and Engineering.

[17]  C. I. Noshi,et al.  Casing Failure Data Analytics: A Novel Data Mining Approach in Predicting Casing Failures for Improved Drilling Performance and Production Optimization , 2018 .

[18]  Ramon G. Bentsen,et al.  A Computer Model to Determine the Temperature Distributions In a Wellbore , 1982 .

[19]  M. Zoback,et al.  Predicted and observed shear on preexisting faults during hydraulic fracture stimulation , 2018, SEG Technical Program Expanded Abstracts 2018.

[20]  Jiao Peng,et al.  Hydraulic fracture propagation direction during volume fracturing in unconventional reservoirs , 2016 .

[21]  J. Brune Tectonic stress and the spectra of seismic shear waves from earthquakes , 1970 .

[22]  Lucas W. Bazan,et al.  A Discrete Fracture Network Model for Hydraulically Induced Fractures - Theory, Parametric and Case Studies , 2011 .

[23]  M. Mainguy Monitoring shear deformations above compacting high-pressure high-temperature reservoirs with calliper surveys , 2016 .

[24]  M. Biot General Theory of Three‐Dimensional Consolidation , 1941 .