Development and characterization of a new thief sampling device for cohesive powders.

New sampling probes and methods for investigating cohesive powders are conceived, designed and characterized. Probes are made of two metallic shells (a slide and a cover) which need to be inserted sequentially into the bed of powder in order to extract representative samples. The thin profile of the shells, combined with a particular insertion procedure, is intended to minimize stresses on the powder; thereby reducing both the invasiveness and the dragging of material through the bed. Probes of similar design with different shape and size have been tested on stratified beds of cohesive powders of different colors. Sampling performances are quantitatively compared among different probes (for size and shape) and also with literature data. The comparison has indicated that the new sampling devices effectively improved sampling efficiency, reliability and possibilities. The simple construction and use suggest they can be viable and effective alternatives to traditional probes for cohesive mixtures.

[1]  F J Muzzio,et al.  Sampling and characterization of pharmaceutical powders and granular blends. , 2003, International journal of pharmaceutics.

[2]  Andrea C. Santomaso,et al.  Mixing kinetics of granular materials in drums operated in rolling and cataracting regime , 2005 .

[3]  Levine,et al.  Rotationally induced segregation of granular materials. , 1994, Physical review letters.

[4]  N. Harnby.  Chapter 5 – The mixing of cohesive powders , 1992 .

[5]  J. Bridgwater,et al.  Fundamental powder mixing mechanisms , 1976 .

[6]  R. Nedderman.  Statics and Kinematics of Granular Materials: Euler's equation and rates of strain , 1992 .

[7]  Fernando J. Muzzio,et al.  An improved powder-sampling tool , 1999 .

[8]  Andrea C. Santomaso,et al.  Mechanisms of mixing of granular materials in drum mixers under rolling regime , 2004 .

[9]  R. M. Nedderman,et al.  Principles of Powder Mechanics. : Pergamon Press, 1970. 221 pp.,£3. , 1971 .

[10]  L. Cartilier,et al.  Cohesive, multicomponent, dense powder flow characterization by NIR. , 2007, International journal of pharmaceutics.

[11]  P. V. Danckwerts.  THEORY OF MIXTURES AND MIXING , 1981 .

[12]  D. Schulze.  Powders and Bulk Solids: Behavior, Characterization, Storage and Flow , 2021 .

[13]  Andrea C. Santomaso,et al.  Powder flowability and density ratios: the impact of granules packing , 2003 .

[14]  Harnby.  An engineering view of pharmaceutical powder mixing. , 2000, Pharmaceutical science & technology today.

[15]  Andreas S. L. Mendez,et al.  Evaluation of powder mixing operation during batch production: Application to operational qualification procedure in the pharmaceutical industry , 2010 .

[16]  Fernando J. Muzzio,et al.  Sampling practices in powder blending , 1997 .

[17]  Andrea C. Santomaso,et al.  Improving local composition measurements of binary mixtures by image analysis , 2008 .