Global buckling analysis of plane and space thin-walled frames in the context of GBT

Abstract This paper reports research work concerning the use of Generalised Beam Theory (GBT) to analyse the global buckling behaviour of plane and space thin-walled frames. Following a brief overview of the main concepts and procedures involved in the performance of a GBT buckling analysis, one presents in detail the formulation and numerical implementation of a GBT-based beam finite element that includes only the first four (rigid-body) deformation modes — namely, one describes (i) the kinematical models developed to simulate the warping transmission at frame joints connecting two or more non-aligned U- and I-section members, (ii) the procedures adopted to handle the effects stemming from the non-coincidence of the member centroidal and shear centre axes (cross-sections without double symmetry), and (iii) the definition of joint elements, which involves providing a relation between the connected member GBT degrees of freedom and the joint generalised displacements. Finally, one presents and discusses numerical results that make it possible to illustrate the application and show the capabilities of the above GBT-based finite-element formulation and implementation. For validation purposes, the GBT-based results (critical buckling loads and mode shapes) are also compared with values yielded by shell (mostly) and beam finite element analyses carried out in the code ANSYS.

[1]  R. Schardt.  Generalized beam theory—an adequate method for coupled stability problems , 1994 .

[2]  J. M. Davies.  Generalised Beam Theory (GBT) for Coupled Instability Problems , 1998 .

[3]  Alvin Masarira.  The effect of joints on the stability behaviour of steel frame beams , 2002 .

[4]  Nicholas S. Trahair,et al.  WARPING AND DISTORTION AT I-SECTION JOINTS , 1974 .

[5]  Steen Krenk,et al.  Warping of joints in I-beam assemblages , 1991 .

[6]  Dinar Camotim,et al.  GBT formulation to analyse the buckling behaviour of thin-walled members with arbitrarily ‘branched’ open cross-sections , 2006 .

[7]  Dinar Camotim,et al.  GBT FORMULATION TO ANALYZE THE BUCKLING BEHAVIOR OF THIN-WALLED MEMBERS SUBJECTED TO NON-UNIFORM BENDING , 2007 .

[8]  Dinar Camotim,et al.  GBT buckling analysis of pultruded FRP lipped channel members , 2003 .

[9]  R. Schardt.  Verallgemeinerte Technische Biegetheorie , 1989 .

[10]  P. W. Sharman,et al.  Analysis of structures with thin-walled open sections , 1985 .

[11]  Lei Zhang,et al.  - Warping and bimoment transmission through diagonally stiffened beam-to-column joints , 2005 .

[12]  J. M. Davies,et al.  Second-order generalised beam theory , 1994 .

[13]  P.J.B. Morrell,et al.  Influence of joint detail on the flexural/torsional interaction of thin-walled structures , 1996 .

[14]  Dinar Camotim,et al.  GBT-based Structural Analysis of Thin-walled members: Overview, Recent Progress and Future Developments , 2006 .

[15]  Dinar Camotim,et al.  Second-order generalised beam theory for arbitrary orthotropic materials , 2002 .

[16]  Gregory J. Hancock,et al.  Structural analysis of assemblages of thin-walled members , 1982 .

[17]  J. M. Davies,et al.  First-order generalised beam theory , 1994 .

[18]  Dinar Camotim,et al.  Formulation of a GBT-Based Finite Element to Analyse the Global Buckling Behaviour of Plane and Spatial Thin-Walled Frames , 2006 .