Effect of ultrasonic nanocrystal surface modification on the fatigue behaviors of plasma-nitrided S45C steel

Abstract An ultrasonic nanocrystal surface modification (UNSM) technique with different striking numbers (34,000 mm − 2 and 69,000 mm − 2 ) was employed to modify the surface of plasma-nitrided S45C steel. After the UNSM treatment, the fatigue strength of the 8 h plasma-nitrided specimen (N8) was clearly improved, and the sub-surface cracks were nearly restrained, while the 48 h plasma-nitrided specimen (N48) showed no improvement of fatigue strength. The mechanical properties of the specimens before and after UNSM treatment were characterized, such as the microhardness, the surface roughness, and the surface compressive residual stress. A grain refinement layer was formed on the surface of the specimens due to the severe plastic deformation induced by the dense striking, and the grain distribution was analyzed by using X-ray diffraction. The grain refinement layer played an important role in the improved mechanical properties. The fatigue limit enhancement mechanism was examined by analyzing the stress intensity factor from fish-eye cracks. For the fish-eye cracks, the stress intensity factor in the facet area, △  K facet , was found to be a constant value of approximately 4.08 MPa·m 1/2 , regardless of either the UNSM treatment or the nitriding duration.

[1]  E. .. Mittemeijer,et al.  The nitriding behaviour of iron-chromium-carbon alloys , 1985 .

[2]  P. Rossi,et al.  Static recrystallisation and hot strength of Al–1Mg during thermomechanical processing , 1999 .

[3]  Ke Lu,et al.  Surface Nanocrystallization (SNC) of Metallic Materials-Presentation of the Concept behind a New Approach , 2009 .

[4]  Jian Lu,et al.  Nanomechanical properties of nanostructured titanium prepared by SMAT , 2006 .

[5]  Chang-Min Suh,et al.  Fatigue and mechanical characteristics of nano-structured tool steel by ultrasonic cold forging technology , 2007 .

[6]  M. Keddam.  Characterization of the nitrided layers of XC38 carbon steel obtained by R.F. plasma nitriding , 2008 .

[7]  F. Sánchez-Bajo,et al.  Analytical formulation of the variance method of line-broadening analysis for Voigtian X-ray diffraction peaks , 2006 .

[8]  E. Macherauch,et al.  Residual stress relaxation in an AISI 4140 steel due to quasistatic and cyclic loading at higher temperatures , 1998 .

[9]  K. Lu,et al.  Friction and wear behaviors of nanocrystalline surface layer of pure copper , 2006 .

[10]  S. Bagherifard,et al.  Fatigue behavior of a low-alloy steel with nanostructured surface obtained by severe shot peening , 2012 .

[11]  A. L. Ortiz,et al.  Interrogation of the microstructure and residual stress of a nickel-base alloy subjected to surface severe plastic deformation , 2008 .

[12]  Jian Lu,et al.  Surface nanocrystallization of iron induced by ultrasonic shot peening , 1999 .

[13]  H. Abreu,et al.  Deformation induced martensite in an AISI 301LN stainless steel: characterization and influence on pitting corrosion resistance , 2007 .

[14]  Mario Guagliano,et al.  About the role of residual stresses and surface work hardening on fatigue ΔKth of a nitrided and shot peened low-alloy steel , 2008 .

[15]  Guanlin Liu,et al.  Strain-induced refinement in a steel with spheroidal cementite subjected to surface mechanical attrition treatment , 2008 .

[16]  G. I. Prokopenko,et al.  Effect of structure evolution induced by ultrasonic peening on the corrosion behavior of AISI-321 stainless steel , 2007 .

[17]  Leon L. Shaw,et al.  Comparison between shot peening and surface nanocrystallization and hardening processes , 2007 .

[18]  Dawei Li,et al.  The effect of nanostructured surface layer on the fatigue behaviors of a carbon steel , 2009 .

[19]  Jian Lu,et al.  Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment , 2004 .

[20]  Jian Lu,et al.  Plastic strain-induced grain refinement at the nanometer scale in copper , 2006 .

[21]  P. C. Paris,et al.  Study of thermal effects associated with crack propagation during very high cycle fatigue tests , 2008 .

[22]  Vadim V. Silberschmidt,et al.  Characterization of ultrasonically peened and laser-shock peened surface layers of AISI 321 stainless steel , 2008 .

[23]  Wang Dongpo,et al.  Investigations on the nanocrystallization of 40Cr using ultrasonic surface rolling processing , 2008 .

[24]  Yu-Si Lee,et al.  The effect of the cementite phase on the surface hardening of carbon steels by shot peening , 2010 .

[25]  P. Liaw,et al.  A study of the effect of nanostructured surface layers on the fatigue behaviors of a C-2000 superalloy , 2007 .

[26]  Kyoung-Mook Lim,et al.  Effect of Si content on surface hardening of Al-Si alloy by shot peening treatment , 2011 .

[27]  Jian Lu,et al.  Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment , 2006 .

[28]  Jian Lu,et al.  An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment , 2002 .

[29]  Xiaolei Wu,et al.  Microstructure and evolution of mechanically-induced ultrafine grain in surface layer of AL-alloy subjected to USSP , 2002 .

[30]  Ri-ichi Murakami,et al.  Fatigue properties of a S45C steel subjected to ultrasonic nanocrystal surface modification , 2010 .

[31]  K. Genel,et al.  Fatigue strength improvement of a hard chromium plated AISI 4140 steel using a plasma nitriding pre-treatment , 2006 .

[32]  Subra Suresh,et al.  Grain size effects on the fatigue response of nanocrystalline metals , 2003 .

[33]  C. Budtz-Jørgensen,et al.  On plasma nitriding of steels , 2000 .

[34]  K. Lu,et al.  Fabrication of a gradient nano-micro-structured surface layer on bulk copper by means of a surface mechanical grinding treatment , 2008 .

[35]  Mario Guagliano,et al.  A numerical model of severe shot peening (SSP) to predict the generation of a nanostructured surface layer of material , 2010 .