Development and Analysis of Ultrasonic Assisted Friction Stir Welding Process.

[1]  H. Soleimanimehr,et al.  FEM analysis of ultrasonic-vibration-assisted turning and the vibratory tool , 2008 .

[2]  V. Kovan,et al.  Friction stir welding of AISI 304 austenitic stainless steel , 2007 .

[3]  Victoria Reitz,et al.  Causing a stir in welding , 2002 .

[4]  Vadim V. Silberschmidt,et al.  Finite element analysis of ultrasonically assisted turning of Inconel 718 , 2004 .

[5]  B. Wüthrich.  AN INTERNATIONAL SYMPOSIUM , 1997 .

[6]  M. R. Johnsen.  Friction stir welding takes off at Boeing , 1999 .

[7]  Z. Zhang,et al.  Material behaviors and mechanical features in friction stir welding process , 2007 .

[8]  Sanbao Lin,et al.  The influence of pin geometry on bonding and mechanical properties in friction stir weld 2014 Al alloy , 2005 .

[9]  Jiromaru Tsujino,et al.  New methods of ultrasonic welding of metal and plastic materials , 1996 .

[10]  Jiromaru Tsujino,et al.  Recent developments of ultrasonic welding , 1995, 1995 IEEE Ultrasonics Symposium. Proceedings. An International Symposium.

[11]  Hiroyuki Kokawa,et al.  Microstructural evolution of 6063 aluminum during friction-stir welding , 1999 .

[12]  R. Miranda,et al.  Process Developments and Materials Characterization in FSW/P , 2022 .

[13]  Andrzej Rosochowski,et al.  FE Simulation of Ultrasonic Back Extrusion , 2007 .

[14]  Radovan Kovacevic,et al.  Finite element modeling of friction stir welding—thermal and thermomechanical analysis , 2003 .

[15]  R.W.B. Stephens,et al.  IEEE ultrasonics symposium , 1972 .

[16]  E. Lehfeldt.  Influence of Ultrasonic Vibration on Metallic Friction , 1966 .

[17]  Reimund Neugebauer,et al.  Ultrasonic application in drilling , 2004 .

[18]  B. B. Grimmett,et al.  Friction stir welding studies on mild steel , 2003 .

[19]  Lawrence E Murr,et al.  Heat input and temperature distribution in friction stir welding , 1998 .

[20]  J. S. Khamba,et al.  Ultrasonic machining of titanium and its alloys : A review , 2006 .

[21]  Douglas T. Queheillalt,et al.  DEFORMATION AND FRACTURE MODES OF SANDWICH STRUCTURES SUBJECTED TO UNDERWATER IMPULSIVE LOADS , 2007 .

[22]  T. Nicholas.  Tensile testing of materials at high rates of strain , 1981 .

[23]  H. Yüncü,et al.  Thermal contact conductance of nominaly flat surfaces , 2006 .

[24]  Zhili Feng,et al.  Thermo-Mechanical Modeling of Friction Stir Spot Welding (FSSW) Process: Use of an Explicit Adaptive Meshing Scheme , 2005 .

[25]  Z. Zhang,et al.  A fully coupled thermo-mechanical model of friction stir welding , 2008 .

[26]  O. Izumi,et al.  Effects of Superimposed Ultrasonic Vibration on Compressive Deformation of Metals , 1966 .

[27]  Z. Zhang,et al.  Material behaviors and mechanical features in friction stir welding process , 2007 .

[28]  Edgar de Vries,et al.  Mechanics and mechanisms of ultrasonic metal welding , 2004 .

[29]  W. M. Thomas,et al.  Friction Stir Butt Welding , 1991 .

[31]  M. W. Mahoney,et al.  Properties of friction-stir-welded 7075 T651 aluminum , 1998 .

[32]  R. Pohlman,et al.  Influence of ultrasonic vibration on metallic friction , 1966 .

[33]  W. Thomas,et al.  Friction Stir Welding – Recent Developments in Tool and Process Technologies , 2003 .

[34]  Margaret Lucas,et al.  Influence of ultrasonics on upsetting of a model paste. , 2002, Ultrasonics.

[35]  D. H. Sansome,et al.  A STUDY OF THE MECHANICS OF WIRE DRAWING WITH A SUPERIMPOSED ULTRASONIC STRESS , 1970 .

[36]  Vadim V. Silberschmidt,et al.  3D finite element analysis of ultrasonically assisted turning , 2007 .

[37]  Anil Patnaik,et al.  Process Parameter Development and Fixturing Issues for Friction Stir Welding of Aluminum Beam Assemblies , 2005 .

[38]  Abdelmageed Elmustafa,et al.  Experimental and numerical investigation of the plunge stage in friction stir welding , 2008 .

[39]  Howard Kuhn,et al.  Mechanical testing and evaluation , 2000 .

[40]  Frank E. Pfefferkorn,et al.  Laser-Assisted Friction Stir Lap Welding of Aluminum , 2005 .

[41]  A. Moisan,et al.  The State of the Art of Ultrasonic Machining , 1981 .

[42]  Øystein Grong,et al.  A process model for friction stir welding of age hardening aluminum alloys , 2001 .

[43]  M. Xiao,et al.  The effect of tool nose radius in ultrasonic vibration cutting of hard metal , 2003 .

[44]  D. H. Sansome,et al.  The development of oscillatory metal-drawing equipment — an engineer's view , 1974 .

[45]  Vadim V. Silberschmidt,et al.  Finite element simulations of ultrasonically assisted turning , 2003 .

[46]  J. Tsujino,et al.  Ultrasonic butt welding of aluminum, aluminum alloy and stainless steel plate specimens. , 2002, Ultrasonics.

[47]  H. Fujii,et al.  Wear characteristics of a WC–Co tool in friction stir welding of AC4A+30 vol%SiCp composite , 2005 .

[48]  H. Schmidt,et al.  A local model for the thermomechanical conditions in friction stir welding , 2004 .

[49]  B. Langenecker.  Effects of Ultrasound on Deformation Characteristics of Metals , 1966, IEEE Transactions on Sonics and Ultrasonics.

[50]  Thomas W. Eagar,et al.  Welding processes for aeronautics , 2001 .

[51]  T. M. Yue,et al.  A study of ultrasonic-aided wire electrical discharge machining , 1997 .

[52]  Michio Uneda,et al.  A study on combined vibration drilling by ultrasonic and low-frequency vibrations for hard and brittle materials , 1998 .

[53]  Rajiv S. Mishra,et al.  Friction Stir Welding and Processing , 2007 .

[54]  R. Madoliat,et al.  Investigations on the effects of ultrasonic vibrations in the extrusion process , 2007 .

[55]  Xinhai Qi,et al.  Thermal and Thermo-Mechanical Modeling of Friction Stir Welding of Aluminum Alloy 6061-T6 , 1998 .

[56]  W. M. Zeng,et al.  EFFECT OF TOOL WEAR ON MICROSTRUCTURE, MECHANICAL PROPERTIES AND ACOUSTIC EMISSION OF FRICTION STIR WELDED 6061 Al ALLOY , 2006 .

[57]  Gary M. Bone,et al.  Burr size reduction in drilling by ultrasonic assistance , 2005 .

[58]  G. Ravichandran,et al.  Large strain mechanical behavior of 1018 cold-rolled steel over a wide range of strain rates , 2003 .

[59]  Changshui Gao,et al.  A study of ultrasonically aided micro-electrical-discharge machining by the application of workpiece vibration , 2003 .