Aerodynamic Drag Reduction on a Simple Car-Like Shape with Rear Upper Body Taper

Various techniques to reduce the aerodynamic drag of bluff bodies through the mechanism of base pressure recovery have been investigated. These include, for example, boat-tailing, base cavities and base bleed. In this study a simple body representing a car shape is modified to include tapering of the rear upper body on both roof and sides. The effects of taper angle and taper length on drag and lift characteristics are investigated. It is shown that a significant drag reduction can be obtained with moderate taper angles. An unexpected feature is a drag rise at a particular taper length. Pressure data obtained on the rear surfaces and some wake flow visualisation using PIV are presented. © 2013 SAE International.

[1]  Martin A. Passmore,et al.  The Optimization of Roof Trailing Edge Geometry of a Simple Square-Back. , 2010 .

[2]  Robert J. Englar,et al.  Drag Reduction, Safety Enhancement, and Performance Improvement for Heavy Vehicles and SUVs Using Advanced Pneumatic Aerodynamic Technology , 2003 .

[3]  Jeff Howell,et al.  Aerodynamic Drag Reduction for a Simple Bluff Body Using Base Bleed , 2003 .

[4]  Peter M. Render,et al.  Design methodology and performance of an indraft wind tunnel , 2004, The Aeronautical Journal (1968).

[5]  Kevin R. Cooper,et al.  Truck Aerodynamics Reborn - Lessons from the Past , 2003 .

[6]  Jeff Howell,et al.  The Effect of Backlight Aspect Ratio on Vortex and Base Drag for a Simple Car-Like Shape , 2008 .

[7]  W. A. Mair.  Reduction of Base Drag by Boat-Tailed Afterbodies in Low-Speed Flow , 1969 .

[8]  W. A. Mair,et al.  Boat-tailed afterbodies of square section as drag-reduction devices , 1983 .

[9]  P. R. Viswanath,et al.  Flow management techniques for base and afterbody drag reduction , 1996 .

[10]  Thomas Morel.  Effect of Base Cavities on the Aerodynamic Drag of an Axisymmetric Cylinder , 1979 .

[11]  Mathieu Boivin,et al.  Fuel Savings by Means of Flaps Attached to the Base of a Trailer: Field Test Results , 2005 .

[12]  R. Buchheim,et al.  Necessity and Premises for Reducing the Aerodynamic Drag of Future Passenger Cars , 1981 .

[13]  Robert Dominy,et al.  Bluff Body Drag Reduction with Ventilated Base Cavities , 2012 .