Analysis of impact-induced damage and delamination in the composite shell of a helmet

The impact energy absorption by helmets is of vital importance to the safety of motorcyclists during accidents. The paper is concerned with the study of damage and delamination, which are the principal modes of failure and energy absorption, in a composite shell and their influence on the impact performance of a helmet. Numerical simulations were conducted with different composite shells made of cross-ply laminate, woven fabric, and glass mat. The effectiveness of the numerical model is established using available experimental results from the literature. Hashin failure criteria and cohesive zone model (CZM) were used for predicting the in-plane damage and delamination in composite plies, respectively. An interface layer having a bilinear relationship between traction and relative displacement was placed between the plies of the composite shell to predict the delamination. The influence of damage and delamination in shells made of composite materials on impact-induced forces is evaluated and their performance is compared with helmet shells made of Acrylonitrile Butadiene Styrene (ABS).

[2]  H. Suemasu,et al.  A numerical study on compressive behavior of composite plates with multiple circular delaminations considering delamination propagation , 2008 .

[3]  N. Chandra,et al.  Some issues in the application of cohesive zone models for metal–ceramic interfaces , 2002 .

[4]  Ho-Sung Kang,et al.  Three-Dimensional Human Head Finite-Element Model Validation Against Two Experimental Impacts , 1999, Annals of Biomedical Engineering.

[5]  N J Mills.  ACCIDENT INVESTIGATION OF MOTORCYCLE HELMETS , 1996 .

[6]  Praveen K. Pinnoji,et al.  Design of ventilated helmets: computational fluid and impact dynamics studies , 2008 .

[7]  A. Gilchrist,et al.  Impact deformation of ABS and GRP motorcycle helmet shells , 1994 .

[8]  Ignace Verpoest,et al.  Modelling of the interaction between matrix cracks and delaminations during impact of composite plates , 1996 .

[9]  P. Camanho,et al.  Mixed-Mode Decohesion Finite Elements for the Simulation of Delamination in Composite Materials , 2002 .

[10]  NJ Mills,et al.  Polymer Foams Handbook: Engineering and Biomechanics Applications and Design Guide , 2007 .

[11]  Z. Hashin.  Failure Criteria for Unidirectional Fiber Composites , 1980 .

[12]  K Kormi,et al.  Application of the finite-element method to simulation of damage to the human skull as a consequence of missile impact on a multi-layered composite crash helmet. , 1992, Journal of biomedical engineering.

[13]  D. E. Vlachos,et al.  Finite element analysis of impact damage response of composite motorcycle safety helmets , 2002 .

[14]  Ching H. Yew,et al.  Impact damage in composite laminates , 1990 .

[15]  Lorenzo Iannucci,et al.  Dynamic delamination modelling using interface elements , 2006 .

[16]  P. Camanho,et al.  Numerical Simulation of Mixed-Mode Progressive Delamination in Composite Materials , 2003 .

[17]  N. J. Mills,et al.  Rapid hydrostatic compression of low-density polymeric foams , 2004 .

[18]  P. Geubelle,et al.  Impact-induced delamination of composites: A 2D simulation , 1998 .

[19]  K. Volokh.  Comparison between cohesive zone models , 2004 .

[20]  A. L. Yettram,et al.  Materials for motorcycle crash helmets - a finite element parametric study , 1994 .