Quasi-static Tensile and Compressive Behavior of Nanocrystalline Tantalum Based on Miniature Specimen Testing—Part II: Mechanical Properties

[1]  T. Langdon,et al.  A critical examination of pure tantalum processed by high-pressure torsion , 2015 .

[2]  Q. Wei,et al.  Effect of low-temperature rolling on the propensity to adiabatic shear banding of commercial purity tungsten , 2013 .

[3]  G. Cheng,et al.  Grain Size Effect on Deformation Mechanisms of Nanocrystalline bcc Metals , 2013 .

[4]  H. V. Swygenhoven,et al.  Slip-induced intergranular stress redistribution in nanocrystalline Ni , 2012 .

[5]  J. Ligda,et al.  Transition in the deformation mode of nanocrystalline tantalum processed by high-pressure torsion , 2012 .

[6]  P. Anderson,et al.  Probing the Relation Between Dislocation Substructure and Indentation Characteristics Using Quantized Crystal Plasticity , 2012 .

[7]  J. Ligda,et al.  Nanocrystalline refractory metals for extreme condition applications , 2011 .

[8]  K. Edalati,et al.  High-pressure torsion of pure metals: Influence of atomic bond parameters and stacking fault energy on grain size and correlation with hardness , 2011 .

[9]  M. Janeček,et al.  Evolution of defects in copper deformed by high-pressure torsion , 2011 .

[10]  Xiaolei Wu,et al.  Microstructure and mechanical properties at different length scales and strain rates of nanocrystalline tantalum produced by high-pressure torsion , 2011 .

[11]  F. Zhou,et al.  A numerical study of microstructure effect on adiabatic shear instability: Application to nanostructured/ultrafine grained materials , 2010 .

[12]  Reinhard Pippan,et al.  Saturation of Fragmentation During Severe Plastic Deformation , 2010 .

[13]  F. Mohamed,et al.  Deformation Mechanisms in Nanocrystalline Materials , 2010 .

[14]  H. V. Swygenhoven,et al.  The stress-strain response of nanocrystalline metals: A quantized crystal plasticity approach , 2009 .

[15]  W. W. Milligan,et al.  Compressive and tensile deformation behavior of consolidated Fe , 2008 .

[16]  K. T. Ramesh,et al.  Grain size dependent shear instabilities in body-centered and face-centered cubic materials , 2008 .

[17]  Q. Wei,et al.  Dynamic behaviors of body-centered cubic metals with ultrafine grained and nanocrystalline microstructures , 2008 .

[18]  S. Joshi,et al.  Stability map for nanocrystalline and amorphous materials. , 2008, Physical review letters.

[19]  T. Hufnagel,et al.  Mechanical behavior of amorphous alloys , 2007 .

[20]  V. Tvergaard,et al.  Effects of texture on shear band formation in plane strain tension/compression and bending , 2007 .

[21]  Q. Wei.  Strain rate effects in the ultrafine grain and nanocrystalline regimes—influence on some constitutive responses , 2007 .

[22]  K. T. Ramesh,et al.  Nanoengineering opens a new era for tungsten as well , 2006 .

[23]  K. T. Ramesh,et al.  Microstructure and mechanical properties of super-strong nanocrystalline tungsten processed by high-pressure torsion , 2006 .

[24]  M. Meyers,et al.  Mechanical properties of nanocrystalline materials , 2006 .

[25]  K. T. Ramesh,et al.  Mechanical behavior and dynamic failure of high-strength ultrafine grained tungsten under uniaxial compression , 2005 .

[26]  K. T. Ramesh,et al.  Plastic flow localization in bulk tungsten with ultrafine microstructure , 2005 .

[27]  K. T. Ramesh,et al.  Effect of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity and activation volume: fcc versus bcc metals , 2004 .

[28]  K. T. Ramesh,et al.  Nano-structured vanadium: processing and mechanical properties under quasi-static and dynamic compression , 2004 .

[29]  K. T. Ramesh,et al.  Microstructure and mechanical properties of tantalum after equal channel angular extrusion (ECAE) , 2003 .

[30]  K. T. Ramesh,et al.  Effects of nanocrystalline and ultrafine grain sizes on constitutive behavior and shear bands in iron , 2003 .

[31]  K. T. Ramesh,et al.  Evolution and microstructure of shear bands in nanostructured Fe , 2002 .

[32]  C. Koch,et al.  Compressive mechanical behavior of nanocrystalline Fe investigated with an automated ball indentation technique , 1998 .

[33]  W. Spitzig,et al.  Three-stage hardening in tantalum single crystals. , 1965 .

[34]  K. Edalati,et al.  Correlations between hardness and atomic bond parameters of pure metals and semi-metals after processing by high-pressure torsion , 2011 .

[35]  K. T. Ramesh,et al.  Rotational diffusion and grain size dependent shear instability in nanostructured materials , 2008 .