Plasma etching antireflection nanostructures on optical elements in concentrator photovoltaic systems

Abstract. Transmission-type concentrator photovoltaic (CPV) systems are a potential candidate to achieve high efficiency and low cost solar energy. The use of optical elements in these systems creates reflection losses of incoming solar energy that account for about 8% to 12% depending on the optical design. In order to reduce these losses, we have nanostructured the air/optical-elements’ interfaces by using plasma etching methods on the Fresnel lens made of poly(methyl methacrylate) (PMMA) and the homogenizer made of glass. On flat PMMA and glass substrates, transmittance enhancement measurements are in agreement with relative Jsc gains. The field test results using a CPV module with all textured optical-elements’ interfaces achieved 8.0% and 4.3% relative Jsc and efficiency gains, respectively, demonstrating the potential of this approach to tackle the reflection losses.

[1]  J. Lindner,et al.  Biomimetic approaches to create anti-reflection glass surfaces for solar cells using self-organizing techniques , 2013 .

[2]  Young Min Song,et al.  Enhanced power generation in concentrated photovoltaics using broadband antireflective coverglasses with moth eye structures. , 2012, Optics express.

[3]  Jae Su Yu,et al.  Enhanced transmittance and hydrophilicity of nanostructured glass substrates with antireflective properties using disordered gold nanopatterns. , 2012, Optics express.

[4]  Joachim P Spatz,et al.  Biomimetic interfaces for high-performance optics in the deep-UV light range. , 2008, Nano letters.

[5]  Henning Fouckhardt,et al.  Self-masking controlled by metallic seed layer during glass dry-etching for optically scattering surfaces , 2010 .

[6]  A. Tünnermann,et al.  Antireflection of transparent polymers by advanced plasma etching procedures. , 2007, Optics express.

[7]  Beop-Min Kim,et al.  A simple and fast fabrication of a both self-cleanable and deep-UV antireflective quartz nanostructured surface , 2012, Nanoscale Research Letters.

[8]  Henning Fouckhardt,et al.  Lithography-free glass surface modification by self-masking during dry etching , 2011 .

[9]  Julio Chaves,et al.  Triple-junction solar cell performance under Fresnel-based concentrators taking into account chromatic aberration and off-axis operation , 2012 .

[10]  Henning Fouckhardt,et al.  Multitude of glass surface roughness morphologies as a tool box for dosed optical scattering. , 2010, Applied optics.

[11]  Douglas S. Hobbs.  Laser damage threshold measurements of anti-reflection microstructures operating in the near UV and mid-infrared , 2010, Laser Damage.

[12]  Antonio Luque,et al.  High efficiency and high concentration in photovoltaics , 1999 .

[13]  Tomah Sogabe,et al.  Self‐consistent electrical parameter extraction from bias dependent spectral response measurements of III‐V multi‐junction solar cells , 2015 .

[14]  M. Hutley,et al.  The Optical Properties of 'Moth Eye' Antireflection Surfaces , 1982 .

[15]  Douglas S. Hobbs,et al.  Update on the development of high performance anti-reflecting surface relief micro-structures , 2007, SPIE Defense + Commercial Sensing.

[16]  Rubén Mohedano,et al.  High performance Fresnel-based photovoltaic concentrator , 2010, Optical Engineering + Applications.