Thermal Runaway Propagation Assessment of Different Battery Pack Designs Using the TF5 Draft as Framework

[1]  Xuning Feng,et al.  Characterization of penetration induced thermal runaway propagation process within a large format lithium ion battery module , 2015 .

[2]  A. Jain,et al.  Measurements and modeling to determine the critical temperature for preventing thermal runaway in Li-ion cells , 2018, Applied Thermal Engineering.

[3]  Daniel H. Doughty,et al.  A General Discussion of Li Ion Battery Safety , 2012 .

[4]  Christopher J. Orendorff,et al.  Failure propagation in multi-cell lithium ion batteries , 2015 .

[5]  Thomas Hanemann,et al.  Preventing Li-ion cell explosion during thermal runaway with reduced pressure , 2017 .

[6]  Said Al-Hallaj,et al.  Preventing thermal runaway propagation in lithium ion battery packs using a phase change composite material: An experimental study , 2017 .

[7]  Xuning Feng,et al.  Thermal Runaway Propagation Within Module Consists of Large Format Li-Ion Cells , 2016 .

[8]  Fei Gao,et al.  Mathematical model for thermal behavior of lithium ion battery pack under overcharge , 2018, International Journal of Heat and Mass Transfer.

[9]  H. Matsumura,et al.  Basic Study on Thermal Runaway Propagation through Lithium Ion Cells , 2015 .

[10]  Kai Liu,et al.  Influence of the charging and discharging of the 18650 lithium-ion battery thermal runaway , 2017 .

[11]  Qingsong Wang,et al.  Combustion behavior of lithium iron phosphate battery induced by external heat radiation , 2017 .

[12]  Partha P. Mukherjee,et al.  Experimental Analysis of Thermal Runaway and Propagation in Lithium-Ion Battery Modules , 2015 .

[13]  Zhirong Wang,et al.  Effects of the environmental temperature and heat dissipation condition on the thermal runaway of lithium ion batteries during the charge-discharge process , 2017 .

[14]  Kai Yang,et al.  Safety analysis of lithium-ion battery by rheology-mutation theory coupling with fault tree method , 2017 .

[15]  Xuning Feng,et al.  Thermal runaway mechanism of lithium ion battery for electric vehicles: A review , 2018 .

[16]  Kaiqi Xu,et al.  Experimental Analysis of Thermal Runaway Propagation Risk within 18650 Lithium-Ion Battery Modules , 2018 .

[17]  Yanbao Ma,et al.  Prevent thermal runaway of lithium-ion batteries with minichannel cooling , 2017 .

[18]  Eric Darcy,et al.  Passively Thermal Runaway Propagation Resistant Battery Module that Achieves > 190 Wh/kg , 2016 .

[19]  Richard D. Braatz,et al.  Modeling and Simulation of Lithium-Ion Batteries from a Systems Engineering Perspective , 2010 .

[20]  Jingwen Weng,et al.  An Experimental Study on the Thermal Failure Propagation in Lithium-Ion Battery Pack , 2018 .

[21]  Yan-Feng Wang,et al.  Performance improvement of thermal management system of lithium-ion battery module on purely electric AUVs , 2019, Applied Thermal Engineering.

[22]  Shang Gao,et al.  A Test Approach for Evaluating the Safety Considering Thermal Runaway Propagation within the Battery Pack , 2017 .

[23]  J. Wen,et al.  Experimental and modeling analysis of thermal runaway propagation over the large format energy storage battery module with Li4Ti5O12 anode , 2016 .

[24]  Jianqiu Li,et al.  A review on the key issues for lithium-ion battery management in electric vehicles , 2013 .

[25]  F. Larsson,et al.  Abuse by External Heating, Overcharge and Short Circuiting of Commercial Lithium-Ion Battery Cells , 2014 .