Economic Viability Study of an On-Road Wireless Charging System with a Generic Driving Range Estimation Method

The economic viability of on-road wireless charging of electric vehicles (EVs) strongly depends on the choice of the inductive power transfer (IPT) system configuration (static or dynamic charging), charging power level and the percentage of road coverage of dynamic charging. In this paper, a case study is carried out to determine the expected investment costs involved in installing the on-road charging infrastructure for an electric bus fleet. Firstly, a generic methodology is described to determine the driving range of any EV (including electric buses) with any gross mass and frontal area. A dynamic power consumption model is developed for the EV, taking into account the rolling friction, acceleration, deceleration, aerodynamic drag, regenerative braking and Li-ion battery behavior. Based on the simulation results, the linear dependence of the battery state of charge (SoC) on the distance traveled is proven. Further, the impact of different IPT system parameters on driving range is incorporated. Economic implications of a combination of different IPT system parameters are explored for achieving the required driving range of 400 km, and the cost optimized solution is presented for the case study of an electric bus fleet. It is shown that the choice of charging power level and road coverage are interrelated in the economic context. The economic viability of reducing the capacity of the on-board battery as a trade-off between higher transport efficiency and larger on-road charging infrastructure is presented. Finally, important considerations, like the number of average running buses, scheduled stoppage time and on-board battery size, that make on-road charging an attractive option are explored. The cost break-up of various system components of the on-road charging scheme is estimated, and the final project cost and parameters are summarized. The specific cost of the wireless on-road charging system is found to be more expensive than the conventional trolley system at this point in time. With decreasing battery costs and a higher number of running buses, a more economically-viable system can be realized.

[1]  Vincent,et al.  Physics of city buses and their environment , 2013 .

[2]  Pavol Bauer,et al.  Distributed IPT Systems for Dynamic Powering: Misalignment Analysis , 2014, IEEE Transactions on Industrial Electronics.

[3]  H. S. V. S. Kumar Nunna,et al.  A review on plug-in electric vehicles charging: Standards and impact on distribution system , 2014, 2014 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES).

[4]  G. H. Fox,et al.  Electric Vehicle Charging Stations: Are We Prepared? , 2013, IEEE Industry Applications Magazine.

[5]  Srdjan M. Lukic,et al.  Inductively coupled power transfer for continuously powered electric vehicles , 2009, 2009 IEEE Vehicle Power and Propulsion Conference.

[6]  Pavol Bauer,et al.  Driving Range Extension of EV With On-Road Contactless Power Transfer—A Case Study , 2013, IEEE Transactions on Industrial Electronics.

[7]  R. P. Verbeek,et al.  Energie- en milieu-aspecten van elektrische personenvoertuigen , 2015 .

[8]  Eun Suk Suh,et al.  System Architecture and Mathematical Models of Electric Transit Bus System Utilizing Wireless Power Transfer Technology , 2016, IEEE Systems Journal.

[9]  P. Bauer,et al.  High range on-line electric vehicles powered by Inductive Power Transfer , 2014, 2014 IEEE Transportation Electrification Conference and Expo (ITEC).

[10]  H. H. Wu,et al.  A review on inductive charging for electric vehicles , 2011, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).

[11]  Dong-Ho Cho,et al.  Design and Implementation of Shaped Magnetic-Resonance-Based Wireless Power Transfer System for Roadway-Powered Moving Electric Vehicles , 2014, IEEE Transactions on Industrial Electronics.

[12]  Jin-Woo Jung,et al.  Electric vehicles and smart grid interaction: A review on vehicle to grid and renewable energy sources integration , 2014 .

[13]  R. D. De Doncker Power electronic technologies for flexible DC distribution grids , 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).

[14]  Woongchul Choi,et al.  Electrification of public transportation: Battery swappable smart electric bus with battery swapping station , 2014, 2014 IEEE Conference and Expo Transportation Electrification Asia-Pacific (ITEC Asia-Pacific).

[15]  Pavol Bauer,et al.  Generic methodology for driving range estimation of electric vehicle with on-road charging , 2015, 2015 IEEE Transportation Electrification Conference and Expo (ITEC).

[16]  Pavol Bauer,et al.  On-road charging of electric vehicles , 2013, 2013 IEEE Transportation Electrification Conference and Expo (ITEC).

[17]  Pavol Bauer,et al.  Economic considerations for on-road wireless charging systems - A case study , 2015, 2015 IEEE PELS Workshop on Emerging Technologies: Wireless Power (2015 WoW).

[18]  Young Dae Ko,et al.  The Optimal System Design of the Online Electric Vehicle Utilizing Wireless Power Transmission Technology , 2013, IEEE Transactions on Intelligent Transportation Systems.

[19]  José Francisco Sanz Osorio,et al.  Optimal Design of ICPT Systems Applied to Electric Vehicle Battery Charge , 2009, IEEE Transactions on Industrial Electronics.

[20]  Grant Anthony Covic,et al.  Modern Trends in Inductive Power Transfer for Transportation Applications , 2013, IEEE Journal of Emerging and Selected Topics in Power Electronics.