论文信息 - Flexible solar-energy harvesting system on plastic with thin-film LC oscillators operating above ft for inductively-coupled power delivery

Flexible solar-energy harvesting system on plastic with thin-film LC oscillators operating above ft for inductively-coupled power delivery

This paper presents an energy-harvesting system consisting of amorphous-silicon (a-Si) solar cells and thin-film-transistor (TFT) power circuits on plastic. Along with patterned planar inductors, the TFTs realize an LC-oscillator that provides power inversion of the DC solar-module output, enabling a low-cost sheet for inductively-coupled wireless charging of devices. Despite the low performance of the TFTs (ft=1.3MHz at a voltage of 15V), the oscillator can operate above 2MHz by incorporating the device parasitics into the resonant tank. This enables increased quality factor for the planar inductors, improving the power-transfer efficiency and the power delivered. With 3cm-radius single- and double-layer inductors, the system achieves 22.6% and 31% power-transfer efficiency (approaching the analytically-predicted bound), while the power delivered is 20mW and 22mW.

[1] Takao Someya,et al. Organic Semiconductor Devices with Enhanced Field and Environmental Responses for Novel Applications , 2008 .

[2] T. Sakurai,et al. Analysis and design of inductive coupling and transceiver circuit for inductive inter-chip wireless superconnect , 2005, IEEE Journal of Solid-State Circuits.

[3] Hiroshi Toshiyoshi,et al. Insole pedometer with piezoelectric energy harvester and 2V organic digital and analog circuits , 2012, 2012 IEEE International Solid-State Circuits Conference.

[4] Sigurd Wagner,et al. Integrated all-silicon thin-film power electronics on flexible sheets for ubiquitous wireless charging stations based on solar-energy harvesting , 2012, 2012 Symposium on VLSI Circuits (VLSIC).