An electromagnetic energy harvester for powering consumer electronics

This thesis introduces an electromagnetic vibratory energy harvester to power consumer electronics by generating electricity from the strides taken during walking or jogging. The harvester consists of a magnetic pendulum oscillating between two fixed magnets. The pendulum behaves similar to a rotor in a DC generator, while the fixed magnets, which are poled opposite to the pendulum, provide magnetic restoring forces similar to mechanical springs. When attached to a person’s arm, the swinging motion subjects the magnetic pendulum to base excitations. Consequently, the pendulum oscillates near a stator which has three poles of wound copper coils. The motion of the pendulum induces a time-varying magnetic field in the flux path which generates electricity in the coils as per Faraday’s law. To better understand the response behavior of the device, the thesis presents a nonlinear electromechanical model that describes the interaction between the mechanical and electrical subsystems. Experimental system identification is then implemented to characterize several unknown design parameters, including the nonlinear magnetic restoring torque, the mechanical damping coefficient, and the electromechanical coupling. The derived nonlinear mathematical model, which mimics the behavior of a damped Duffing oscillator, is then solved analytically using the method of multiple scales and the results are compared to experimental data showing good agreement for the design parameters considered. The performance of the device in charging a small battery while jogging is investigated. The motion of a typical swinging arm in terms of frequency and acceleration is reproduced on an electrodynamic shaker and used to charge a 100 μ Ah battery yielding an estimated charging time of 12 minutes.

[1]  B. Mann,et al.  Reversible hysteresis for broadband magnetopiezoelastic energy harvesting , 2009 .

[2]  R H Tuttle,et al.  Pendular activity of human upper limbs during slow and normal walking. , 1994, American journal of physical anthropology.

[3]  Alison B. Flatau,et al.  Characterization of energy harvesting potential of Terfenol-D and Galfenol , 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[4]  Stephen G. Burrow,et al.  Energy harvesting from vibrations with a nonlinear oscillator , 2009 .

[5]  Neil D. Sims,et al.  Energy harvesting from the nonlinear oscillations of magnetic levitation , 2009 .

[6]  Wenmei Huang,et al.  A numerical dynamic model of giant magnetostrictive actuator , 2005, 2005 International Conference on Electrical Machines and Systems.

[7]  Gerhard Tröster,et al.  Design and optimization of a linear vibration-driven electromagnetic micro-power generator , 2007 .

[8]  G. Cavagna,et al.  Mechanical work and efficiency in level walking and running , 1977, The Journal of physiology.

[9]  Saibal Roy,et al.  A micro electromagnetic generator for vibration energy harvesting , 2007 .

[10]  Stephen G. Burrow,et al.  An Energy Harvester With Bistable Compliance Characteristics , 2010 .

[11]  Lei Wang,et al.  Energy harvesting by magnetostrictive material (MsM) for powering wireless sensors in SHM , 2007, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[12]  P. Chapman,et al.  Evaluation of motions and actuation methods for biomechanical energy harvesting , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[13]  E.O. Torres,et al.  Electrostatic Energy Harvester and Li-Ion Charger Circuit for Micro-Scale Applications , 2006, 2006 49th IEEE International Midwest Symposium on Circuits and Systems.