Study on boring and drilling with vibration cutting

In this paper, vibration cutting (VC) has been applied to boring and drilling processes using a vibration device we developed. We analyzed the effect of vibration in boring by investigating the surface roughness of workpiece with the help of Taguchi method and analysis of variance (ANOVA). It has been shown that the utilization of VC in boring improves the surface roughness prominently. The shading-area method we proposed can be employed as a simple and feasible approach for the analysis of burrs in intersecting holes. High-frequency vibration boring can reduce the burr formation in intersecting holes effectively. The experimental results show that the utilization of VC reduces the burrs in intersecting holes noticeably.

[1]  Masao Murakawa,et al.  Development of a practical ultrasonic vibration cutting tool system , 2001 .

[2]  Kozo Okita,et al.  A study on burr in low frequency vibratory drilling: drilling of aluminum , 1987 .

[3]  Imtiaz Ahmed Choudhury,et al.  Application of Taguchi method in the optimization of end milling parameters , 2004 .

[4]  Tomio Koyama,et al.  Study on Vibratory Drilling (2nd Report) : Comparison of Conventional Drilling with Vibratory Drilling , 1977 .

[5]  Eiji Shamoto,et al.  Ultra-Precision Diamond Turning of Stainless Steel by Applying Ultrasonic Vibration. , 1991 .

[6]  Eiji Shamoto,et al.  Study on Elliptical Vibration Cutting , 1994 .

[7]  Kenji Inoue,et al.  Ultraprecision ductile cutting of glass by applying ultrasonic vibration , 1992 .

[8]  Osamu Ohnishi,et al.  Drilling Mechanisms in Ultrasonic-Vibration Assisted Microdrilling. , 1998 .

[9]  H. Takeyama,et al.  Burrless Drilling by Means of Ultrasonic Vibration , 1991 .

[10]  P. M. George,et al.  EDM machining of carbon–carbon composite—a Taguchi approach , 2004 .

[11]  David Dornfeld,et al.  Burr/Breakout Model Development and Experimental Verification , 1996 .

[12]  Osamu Ohnishi,et al.  Effects of ultrasonic vibration on machining accuracy in microdrilling , 1996 .

[13]  Eiji Shamoto,et al.  Ultaprecision Diamond Cutting of Hardened Steel by Applying Elliptical Vibration Cutting , 1999 .

[14]  Gwo-Lianq Chern,et al.  Using workpiece vibration cutting for micro-drilling , 2006 .

[15]  H. Weber,et al.  Turning of Machinable Glass Ceramics with an Ultrasonically Vibrated Tool , 1984 .

[16]  Eiji Shamoto,et al.  Ultraprecision diamond turning of stainless steel by applying ultrasonic vibration , 1991 .