Single-mode integrated photonics assembly is challenging due to the tight alignment required for optical connections. To address this, we have developed a parallelized fiber assembly process using self-alignment of fiber arrays in V-grooves defined on the photonic chip. This approach is compatible with standard automated high-throughput pick and place tools, thus improving the scalability and cost-efficiency of photonic packaging. We describe our efforts toward increasing the assembly throughput as well as making the photonic connections compatible with high temperatures from downstream microelectronic assembly processes, such as lead-free solder reflows. The ability to survive these higher temperatures allows the pretesting of optical engines and paves the way for true co-integration of photonics and electronics. We have shown that attaching fibers to chips using multiple adhesives with partitioning of their function provides substantial gains in both throughput and reliability at a relatively small cost of dispense complexity. The fibers are tacked in place with lengthy adhesive cures performed in a batch process outside of the placement tool so as not to impact the placement tool’s throughput. This approach allows for strong long term structural integrity along with optimized optical index matching between the fiber and the waveguide coupler of the photonic dies. Not only did we observe the same peak optical performance that we previously reported, but we have also demonstrated no experimentally significant optical penalty after 5x lead-free solder reflows, in operational temperature between -15°C and 150°C and, after aggressive microelectronic environmental stressing going beyond the parameters traditionally used in optics. The ability to embed single mode optics in the first level package is a disruptive capability contributing to enable the high-density interconnects needed to meet the ever-increasing bandwidth demands for data communication. We discuss the benefits of such configurations, as well as the challenges for thermal management and system yields.
[1]
Tymon Barwicz,et al.
Automated, self-aligned assembly of 12 fibers per nanophotonic chip with standard microelectronics assembly tooling
,
2015,
2015 IEEE 65th Electronic Components and Technology Conference (ECTC).
[2]
Tymon Barwicz,et al.
Towards co-packaging of photonics and microelectronics in existing manufacturing facilities
,
2018,
OPTO.
[3]
Shigenori Aoki,et al.
Low-loss connections between no-polish optical fibers in elastically deformable connectors
,
2014,
Photonics West - Optoelectronic Materials and Devices.
[4]
Tymon Barwicz,et al.
Compliant Polymer Interface Demonstration with Standard Plug-In Connection to Fiber Cables
,
2018,
2018 IEEE Photonics Conference (IPC).
[5]
M. Shiino,et al.
High density multi-fiber connector for optical interconnection
,
2008,
OECC/ACOFT 2008 - Joint Conference of the Opto-Electronics and Communications Conference and the Australian Conference on Optical Fibre Technology.
[6]
Tymon Barwicz,et al.
A Novel Approach to Photonic Packaging Leveraging Existing High-Throughput Microelectronic Facilities
,
2016,
IEEE Journal of Selected Topics in Quantum Electronics.
[7]
Tymon Barwicz,et al.
An o-band metamaterial converter interfacing standard optical fibers to silicon nanophotonic waveguides
,
2015,
2015 Optical Fiber Communications Conference and Exhibition (OFC).