Exfoliated single-walled carbon nanotube-based hydrogen sensor

Abstract The paper presents a simple and inexpensive method for the preparation of an efficient hydrogen gas sensor based on exfoliated Pd-decorated single-walled carbon nanotubes (SWNTs). SWNTs were synthesized by catalytic chemical vapor deposition of methane using a fixed-bed catalytic reactor over hydrides of Mm0.2Tb0.8Co2 obtained through hydrogen decrepitation technique. Purified and chemically treated SWNTs were functionalized with Pd, resulting in nanostructured Pd dispersion on the SWNT surface. Structural, morphological and vibrational characterizations were carried out using XRD, TEM, HRTEM, Raman spectroscopy and FTIR spectroscopy. Sensor devices were fabricated by spraying palladium-dispersed chemically treated SWNT dispersions on smooth glass substrates. Systematic investigations on the hydrogen sensing properties of Pd-SWNT were carried out. Pd-functionalization of the employed SWNT enabled increasing the device response towards hydrogen. Exfoliated SWNT achieved using gum arabic (GA) showed better response to hydrogen when compared to naive purified SWNT. The fabricated thin film sensors exhibited good reversible and reproducible response towards hydrogen at room temperature.

[1]  E. Nothnagel,et al.  Chemical investigation of the structural basis of the emulsifying activity of gum arabic , 2007 .

[2]  Un Jeong Kim,et al.  Raman and IR spectroscopy of chemically processed single-walled carbon nanotubes. , 2005, Journal of the American Chemical Society.

[3]  Andreas Hirsch,et al.  Sidewall Functionalization of Carbon Nanotubes. , 2001, Angewandte Chemie.

[4]  Craig A. Grimes,et al.  Gas sensing characteristics of multi-wall carbon nanotubes , 2001 .

[5]  F. Wei,et al.  Effect of adding nickel to iron–alumina catalysts on the morphology of as-grown carbon nanotubes , 2003 .

[6]  M. Itkis,et al.  Chemistry of single-walled carbon nanotubes. , 2002, Accounts of chemical research.

[7]  S. Ciraci,et al.  Adsorption and dissociation of hydrogen molecules on bare and functionalized carbon nanotubes , 2005 .

[8]  Byeong Kwon Ju,et al.  Multiwall carbon nanotube gas sensor fabricated using thermomechanical structure , 2005 .

[9]  F. Wei,et al.  The evaluation of the gross defects of carbon nanotubes in a continuous CVD process , 2003 .

[10]  C. Mormiche,et al.  The role of steps in the dynamics of hydrogen dissociation on Pt(533) , 2000 .

[11]  Kong,et al.  Nanotube molecular wires as chemical sensors , 2000, Science.

[12]  A. Reddy,et al.  Alloy hydride catalyst route for the synthesis of single-walled carbon nanotubes, multi-walled carbon nanotubes and magnetic metal-filled multi-walled carbon nanotubes , 2006 .

[13]  Richard C. Alkire,et al.  Advances in electrochemical science and engineering , 1990 .

[14]  Andreas Mandelis,et al.  Physics, chemistry, and technology of solid state gas sensor devices , 1993 .

[15]  M. C. Horrillo,et al.  Hydrogen sensors based on carbon nanotubes thin films , 2005 .

[16]  M. Prato,et al.  Purification of HiPCO carbon nanotubes via organic functionalization. , 2002, Journal of the American Chemical Society.

[17]  S. Wiberley,et al.  Introduction to infrared and Raman spectroscopy , 1965 .

[18]  T. Mallouk,et al.  Individual single-walled nanotubes and hydrogels made by oxidative exfoliation of carbon nanotube ropes. , 2003, Journal of the American Chemical Society.

[19]  S. Iijima.  Helical microtubules of graphitic carbon , 1991, Nature.

[20]  S. Djordjevic,et al.  Flammability of gas mixtures containing volatile organic compounds and hydrogen , 2000 .

[21]  Robert H. Hauge,et al.  Solvation of Fluorinated Single-Wall Carbon Nanotubes in Alcohol Solvents , 1999 .

[22]  E J Baerends,et al.  Adsorption and diffusion on a stepped surface: atomic hydrogen on Pt(211). , 2004, The Journal of chemical physics.

[23]  M. H. Bala Subrahmanya,et al.  Pattern of technological innovations in small enterprises: a comparative perspective of Bangalore (India) and Northeast England (UK) , 2005 .

[24]  Saurabh Chopra,et al.  Carbon-nanotube-based resonant-circuit sensor for ammonia , 2002 .

[25]  Kazuya Arai,et al.  Efficient usage of highly dispersed Pt on carbon nanotubes for electrode catalysts of polymer electrolyte fuel cells , 2004 .

[26]  Hongjie Dai,et al.  Functionalized Carbon Nanotubes for Molecular Hydrogen Sensors , 2001 .

[27]  P. Ajayan.  Nanotubes from Carbon. , 1999, Chemical reviews.

[28]  Zettl,et al.  Extreme oxygen sensitivity of electronic properties of carbon nanotubes , 2000, Science.

[29]  Junya Suehiro,et al.  Fabrication of a carbon nanotube-based gas sensor using dielectrophoresis and its application for ammonia detection by impedance spectroscopy , 2003 .

[30]  N. Muradov,et al.  From hydrocarbon to hydrogen–carbon to hydrogen economy , 2005 .

[31]  L. B. Ebert.  Science of fullerenes and carbon nanotubes , 1996 .

[32]  Alan M. Cassell,et al.  Large Scale CVD Synthesis of Single-Walled Carbon Nanotubes , 1999 .