论文信息 - 3D Metrology Using a Collaborative Robot with a Laser Triangulation Sensor

3D Metrology Using a Collaborative Robot with a Laser Triangulation Sensor

Abstract Industrial robots are a key element in Smart Manufacturing systems. They can perform many different tasks such as assembly, pick-and-place, or even 3D metrology operations. In order to perform 3D metrology, the robot is equipped with a 2D laser triangulation sensor. The accuracy of the measurements made by this system is dependent of an accurate TCP (Tool Centre Point) calibration and the accuracy of the robot. In this paper, a TCP calibration method is applied to a collaborative robot. The hand-guiding feature of this kind of robots is used to establish a human-robot interaction to obtain the laser sensor TCP using a calibration sphere. Experimental results are presented to validate the procedure and evaluate the quality of the measurements.

[1] Jun Ni,et al. Nongeometric error identification and compensation for robotic system by inverse calibration , 2000 .

[2] Hao Gu,et al. Quick Robot Cell Calibration for Small Part Assembly , 2015 .

[3] Ilian A. Bonev,et al. Absolute calibration of an ABB IRB 1600 robot using a laser tracker , 2013 .

[4] Yin Guo,et al. A novel TCF calibration method for robotic visual measurement system , 2014 .

[5] Frank Shaopeng Cheng. Calibration of Robot Reference Frames for Enhanced Robot Positioning Accuracy , 2008 .

[6] Dahu Zhu,et al. TCP-based calibration in robot-assisted belt grinding of aero-engine blades using scanner measurements , 2017 .

[7] A. Olabi,et al. Improving the accuracy of industrial robots by offline compensation of joints errors , 2012, 2012 IEEE International Conference on Industrial Technology.

[8] I. Bonev,et al. Kinematic calibration of a five-bar planar parallel robot using all working modes , 2013 .

[9] André Crosnier,et al. Collaborative manufacturing with physical human–robot interaction , 2016 .

[10] Luo Fei,et al. An Overview of Robot Calibration , 2004 .

[11] Jorge Santolaria,et al. Evaluation of the use of a Laser Tracker and an Indexed Metrology Platform as Gauge Equipment in Articulated Arm Coordinate Measuring Machine Verification Procedures , 2015 .