Investigation of the failure of the L-0 blades

Abstract A last stage (L-0) turbine blades failure was experienced at the 110 MW geothermal unit after 1 year of operation period. This unit has two tandem-compound intermediate/low-pressure turbines (turbine A and turbine B) with 23 in./3600 rpm last-stage blades. There were flexible blades continuously coupled 360 degrees around the row by loose cover segment at the tip and loose sleeve and lug at the mid-span (pre-twist design). The failed blades were in the L-0 row of the LP turbine B connected to the generator. The visual examination indicated that the group of 12 L-0 blades of rotor B on the generator side was bent and another group of 5 blades at 140 degrees from the first damaged group was also bent. The cover segments were spread out from the damaged blades and had cracks. Laboratory evaluation of the cracking in the cover segments indicates the failure mechanism to be high cycle fatigue (HCF), initiating at the cover segment holes outer fillet radius. The L-0 blades failure investigation was carried out. The investigation included a metallographic analysis of the cracked cover segments and bent blades, Finite Element Method (FEM) stress and natural frequency analysis (of blades/cover segments), fracture mechanics and crack propagation analysis. This paper provides an overview of the L-0 blades failure investigation, which led to the identification of the blades vibrations within the range 250–588 Hz induced due to unstable flow excitation (stall flutter) as the primary contribution to the observed failure.

[1]  Torsten Fransson,et al.  Flutter of Low Pressure Turbine Blades With Cyclic Symmetric Modes: A Preliminary Design Method , 2004 .

[2]  Reza S. Abhari,et al.  Experimental study of aerodynamic and structural damping in a full-scale rotating turbine , 2003 .

[3]  J. I. Cofer,et al.  Advances in Steam Path Technology , 1996 .

[4]  Peter D. Silkowski,et al.  CFD Investigation of Aeromechanics , 2001 .

[5]  J. A. Kubiak,et al.  Modification of L-1 moving blades , 1995 .

[6]  Walter Sextro,et al.  On Forced Vibration of Shrouded Turbine Blades , 2003 .

[7]  Hsiao-Wei D. Chiang,et al.  An Investigation of Turbomachinery Shrouded Rotor Blade Flutter , 2003 .

[8]  Robert E. Kielb,et al.  Flutter of Low Pressure Turbine Blades With Cyclic Symmetric Modes: A Preliminary Design Method (2003-GT-38694) , 2003 .

[9]  Torsten Fransson,et al.  A New Turbine Cascade for Aeromechanical Testing , 2002 .

[10]  Toshio Suzuki,et al.  Recent Upgrading and Life Extension Technologies for Existing Steam Turbines , 2005 .

[11]  J. Szwedowicz,et al.  Approach to Unidirectional Coupled CFD–FEM Analysis of Axial Turbocharger Turbine Blades , 2002 .

[12]  Robert E. Kielb,et al.  A Design Method to Prevent Low Pressure Turbine Blade Flutter , 1998 .

[13]  Walter Sextro,et al.  The Calculation of the Forced Response of Shrouded Blades with Friction Contacts and Its Experimental Verification , 2000 .

[14]  Jeffrey P. Thomas,et al.  Blade Excitation by Aerodynamic Instabilities: A Compressor Blade Study , 2003 .

[15]  A. Puri,et al.  Cumberland last stage blade failure investigation , 1995 .