Multiobjective analysis for the design and control of an electromagnetic valve actuator

Abstract The electromagnetic valve actuator can deliver much improved fuel efficiency and reduced emissions in spark ignition (SI) engines owing to the potential for variable valve timing when compared with cam-operated, or conventional, variable valve strategies. The possibility exists to reduce pumping losses by throttle-free operation, along with closed-valve engine braking. However, further development is required to make the technology suitable for acceptance into the mass production market. This paper investigates the application of multiobjective optimization techniques to the conflicting objective functions inherent in the operation of such a device. The techniques are utilized to derive the optimal force-displacement characteristic for the solenoid actuator, along with its controllability and dynamic/steady state performance.

[1]  Lothar Thiele,et al.  Multiobjective evolutionary algorithms: a comparative case study and the strength Pareto approach , 1999, IEEE Trans. Evol. Comput..

[2]  Peter J. Fleming,et al.  Genetic Algorithms for Multiobjective Optimization: FormulationDiscussion and Generalization , 1993, ICGA.

[3]  Peter J. Fleming,et al.  Multiobjective optimization and multiple constraint handling with evolutionary algorithms. I. A unified formulation , 1998, IEEE Trans. Syst. Man Cybern. Part A.

[4]  S-H Park,et al.  Effects of design and operating parameters on the static and dynamic performance of an electromagnetic valve actuator , 2003 .

[5]  Claude Marchand,et al.  Using genetic algorithm for the optimization of electromagnetic devices , 1998 .

[6]  ZitzlerE.,et al.  Multiobjective evolutionary algorithms , 1999 .

[7]  S. Hoole Computer-aided analysis and design of electromagnetic devices , 1989 .

[8]  C. Fonseca,et al.  GENETIC ALGORITHMS FOR MULTI-OBJECTIVE OPTIMIZATION: FORMULATION, DISCUSSION, AND GENERALIZATION , 1993 .

[9]  Steven Liu,et al.  Design and control of an electromagnetic valve actuator , 2006, 2006 IEEE Conference on Computer Aided Control System Design, 2006 IEEE International Conference on Control Applications, 2006 IEEE International Symposium on Intelligent Control.

[10]  Peter J. Fleming,et al.  On-line evolution of robust control systems: an industrial active magnetic bearing application , 2001 .

[11]  A. Krener,et al.  Nonlinear controllability and observability , 1977 .

[12]  A. Schaft Observability and Controllability for Smooth Nonlinear Systems , 1982 .

[13]  Peter J. Fleming,et al.  Multiobjective gas turbine engine controller design using genetic algorithms , 1996, IEEE Trans. Ind. Electron..

[14]  Ian Griffin,et al.  Multi-objective optimization approach to the ALSTOM gasifier problem , 2000 .

[15]  J. Simkin,et al.  Optimization problems in electromagnetics , 1991 .

[16]  Matthew N. O. Sadiku,et al.  Elements of Electromagnetics , 1989 .

[17]  Henk Nijmeijer,et al.  Controllability distributions for nonlinear control systems , 1982 .