Ammonium Thiocyanate-Passivated Quasi-Two-Dimensional Dion Jacobson Perovskite Solar Cells for Improved Efficiency and Stability

[1]  Kwanghee Lee,et al.  Efficient and Stable Perovskite Solar Cells with a High Open‐Circuit Voltage Over 1.2 V Achieved by a Dual‐Side Passivation Layer , 2022, Advanced materials.

[2]  L. Qiu,et al.  Effective Passivation with Size‐Matched Alkyldiammonium Iodide for High‐Performance Inverted Perovskite Solar Cells , 2022, Advanced Functional Materials.

[3]  Ming Cheng,et al.  Bi(trifluoromethyl) Benzoic Acid-Assisted Shallow Defect Passivation for Perovskite Solar Cells with an Efficiency Exceeding 21. , 2022, ACS applied materials & interfaces.

[4]  P. Yadav,et al.  Thiocyanate-Passivated Diaminonaphthalene-Incorporated Dion-Jacobson Perovskite for Highly Efficient and Stable Solar Cells. , 2022, ACS applied materials & interfaces.

[5]  F. Gao,et al.  Facet orientation tailoring via 2D-seed- induced growth enables highly efficient and stable perovskite solar cells , 2022, Joule.

[6]  Yuan Zhang,et al.  Surface Passivation Using 2D Perovskites toward Efficient and Stable Perovskite Solar Cells , 2021, Advanced materials.

[7]  Yana Vaynzof,et al.  23.7% Efficient inverted perovskite solar cells by dual interfacial modification , 2021, Science advances.

[8]  J. Moser,et al.  The Role of Alkyl Chain Length and Halide Counter Ion in Layered Dion-Jacobson Perovskites with Aromatic Spacers. , 2021, The journal of physical chemistry letters.

[9]  Xinliang Zhang,et al.  Over 21% Efficiency Stable 2D Perovskite Solar Cells , 2021, Advanced materials.

[10]  X. W. Sun,et al.  Efficient and stable mesoscopic perovskite solar cell in high humidity by localized Dion-Jacobson 2D-3D heterostructures , 2021, Nano Energy.

[11]  G. Wang,et al.  N‐methyl‐2‐pyrrolidone Iodide as Functional Precursor Additive for Record Efficiency 2D Ruddlesden‐Popper (PEA)2(Cs)n−1PbnI3n+1 Solar Cells , 2021, Advanced Functional Materials.

[12]  Hyunjung Shin,et al.  Cyclohexylammonium‐Based 2D/3D Perovskite Heterojunction with Funnel‐Like Energy Band Alignment for Efficient Solar Cells (23.91%) , 2021, Advanced Energy Materials.

[13]  Zhigang Zang,et al.  Crystal Orientation Modulation and Defect Passivation for Efficient and Stable Methylammonium-Free Dion-Jacobson Quasi-2D Perovskite Solar Cells. , 2021, ACS applied materials & interfaces.

[14]  S. Pang,et al.  Formamidinium-incorporated Dion-Jacobson phase 2D perovskites for highly efficient and stable photovoltaics , 2021, Journal of Energy Chemistry.

[15]  Jaewook Kang,et al.  Bulky Organic Cations Engineered Lead-halide Perovskites: A Review on Dimensionality and Optoelectronic Applications , 2021 .

[16]  Soumitra Satapathi,et al.  Lewis Base Passivation of Quasi-2D Ruddlesden–Popper Perovskite for Order of Magnitude Photoluminescence Enhancement and Improved Stability , 2021 .

[17]  A. Hagfeldt,et al.  Organic Ammonium Halide Modulators as Effective Strategy for Enhanced Perovskite Photovoltaic Performance , 2021, Advanced science.

[18]  C. Sheng,et al.  Robust and Swiftly Reversible Thermochromic Behavior of a 2D Perovskite of (C6H4(CH2NH3)2)(CH3NH3)[Pb2I7] for Smart Window and Photovoltaic Smart Window Applications. , 2021, ACS applied materials & interfaces.

[19]  Vincent M. Le Corre,et al.  Revealing Charge Carrier Mobility and Defect Densities in Metal Halide Perovskites via Space-Charge-Limited Current Measurements , 2021, ACS energy letters.

[20]  Xia Yang,et al.  Effective Phase Control for High-Performance Red-Light-Emitting Quasi-2D Perovskite Solar Cells via MACl Additive , 2021 .

[21]  M. Kanatzidis,et al.  Insight on the Stability of Thick Layers in 2D Ruddlesden-Popper and Dion-Jacobson Lead Iodide Perovskites. , 2021, Journal of the American Chemical Society.

[22]  I. Tranca,et al.  Compositional effect on water adsorption on metal halide perovskites , 2021, Applied Surface Science.

[23]  M. Grätzel,et al.  Unravelling the Behavior of Dion–Jacobson Layered Hybrid Perovskites in Humid Environments , 2020, ACS Energy Letters.

[24]  Amit Kumar,et al.  Defect states influencing hysteresis and performance of perovskite solar cells , 2020 .

[25]  J. Even,et al.  Charge carrier dynamics in two-dimensional hybrid perovskites: Dion–Jacobson vs. Ruddlesden–Popper phases , 2020, Journal of Materials Chemistry A.

[26]  M. Abdi‐Jalebi,et al.  Recent progress in morphology optimization in perovskite solar cell , 2020, Journal of Materials Chemistry A.

[27]  Jie Cao,et al.  Alkali-cation-enhanced benzylammonium passivation for efficient and stable perovskite solar cells fabricated through sequential deposition , 2020 .

[28]  Yongbo Yuan,et al.  Suppressing the Excessive Solvated Phase for Dion–Jacobson Perovskites with Improved Crystallinity and Vertical Orientation , 2020 .

[29]  U. Rothlisberger,et al.  Formamidinium‐Based Dion‐Jacobson Layered Hybrid Perovskites: Structural Complexity and Optoelectronic Properties , 2020, Advanced Functional Materials.

[30]  Hongzheng Chen,et al.  Additive assisted hot-casting free fabrication of Dion-Jacobson 2D perovskite solar cell with efficiency beyond 16% , 2020, 2020 47th IEEE Photovoltaic Specialists Conference (PVSC).

[31]  Jihuai Wu,et al.  Highly Efficient CsPbBr3 Planar Perovskite Solar Cells via Additive Engineering with NH4SCN. , 2020, ACS applied materials & interfaces.

[32]  Yanlin Song,et al.  Low-Dimensional Dion-Jacobson Phase Lead-free Perovskites for High-Performance Photovoltaic with Improved Stability. , 2020, Angewandte Chemie.

[33]  Yu Hou,et al.  Diammonium-Cesium Lead Halide Perovskite with Phase-Segregated Interpenetrating Morphology for Photovoltaics. , 2020, The journal of physical chemistry letters.

[34]  N. Park.  Research Direction toward Scalable, Stable, and High Efficiency Perovskite Solar Cells , 2019, Advanced Energy Materials.

[35]  S. Liu,et al.  Pseudohalide (SCN−)-doped CsPbI3 for high-performance solar cells , 2019, Journal of Materials Chemistry C.

[36]  K. Zhu,et al.  Additive Engineering for Efficient and Stable Perovskite Solar Cells , 2019, Advanced Energy Materials.

[37]  N. Park,et al.  Precursor Engineering for a Large-Area Perovskite Solar Cell with >19% Efficiency , 2019, ACS Energy Letters.

[38]  William W. Yu,et al.  Ammonium Thiocyanate-Passivated CsPbI3 Perovskite Nanocrystals for Efficient Red Light-Emitting Diodes , 2019, The Journal of Physical Chemistry C.

[39]  Qiaofei Xu,et al.  A New Organic Interlayer Spacer for Stable and Efficient 2D Ruddlesden-Popper Perovskite Solar Cells. , 2019, Nano letters.

[40]  M. Kanatzidis,et al.  Two-dimensional Dion-Jacobson Hybrid Lead Iodide Perovskites with Aromatic Diammonium Cations. , 2019, Journal of the American Chemical Society.

[41]  Xingyu Gao,et al.  Reduced-Dimensional Perovskite Enabled by Organic Diamine for Efficient Photovoltaics. , 2019, The journal of physical chemistry letters.

[42]  Xiuli Wang,et al.  Dion-Jacobson Phase 2D Layered Perovskites for Solar Cells with Ultrahigh Stability , 2019, Joule.

[43]  M. Kanatzidis,et al.  Structural and thermodynamic limits of layer thickness in 2D halide perovskites , 2018, Proceedings of the National Academy of Sciences.

[44]  Yang Li,et al.  Bifunctional Organic Spacers for Formamidinium-Based Hybrid Dion-Jacobson Two-Dimensional Perovskite Solar Cells. , 2018, Nano letters.

[45]  M. Kanatzidis,et al.  Two-Dimensional Hybrid Halide Perovskites: Principles and Promises. , 2018, Journal of the American Chemical Society.

[46]  Yongsheng Chen,et al.  Two-Dimensional Ruddlesden-Popper Perovskite with Nanorod-like Morphology for Solar Cells with Efficiency Exceeding 15. , 2018, Journal of the American Chemical Society.

[47]  Danjie Liu,et al.  Perovskite Solar Cells: Ionic Additive Engineering Toward High‐Efficiency Perovskite Solar Cells with Reduced Grain Boundaries and Trap Density (Adv. Funct. Mater. 34/2018) , 2018, Advanced Functional Materials.

[48]  Yingchun Cheng,et al.  Synergistic effect of anions and cations in additives for highly efficient and stable perovskite solar cells , 2018 .

[49]  Hongzheng Chen,et al.  Orientation Regulation of Phenylethylammonium Cation Based 2D Perovskite Solar Cell with Efficiency Higher Than 11% , 2018 .

[50]  Miaoqiang Lyu,et al.  Perovskite Solar Cells: In Situ Growth of 2D Perovskite Capping Layer for Stable and Efficient Perovskite Solar Cells (Adv. Funct. Mater. 17/2018) , 2018 .

[51]  Shangfeng Yang,et al.  A strategic review on processing routes towards highly efficient perovskite solar cells , 2018 .

[52]  Zhigang Yin,et al.  Planar‐Structure Perovskite Solar Cells with Efficiency beyond 21% , 2017, Advanced materials.

[53]  Aram Amassian,et al.  Stable high efficiency two-dimensional perovskite solar cells via cesium doping , 2017 .

[54]  Soumitra Satapathi,et al.  Controlling morphology of CH3NH3PbI3 perovskite film by dual solvent elimination method , 2017 .

[55]  Qingliang Liao,et al.  Photovoltaics: Deciphering the NH4PbI3 Intermediate Phase for Simultaneous Improvement on Nucleation and Crystal Growth of Perovskite (Adv. Funct. Mater. 30/2017) , 2017 .

[56]  Hongzheng Chen,et al.  Vertically Oriented 2D Layered Perovskite Solar Cells with Enhanced Efficiency and Good Stability. , 2017, Small.

[57]  T. Noda,et al.  Thermally Stable MAPbI3 Perovskite Solar Cells with Efficiency of 19.19% and Area over 1 cm2 achieved by Additive Engineering , 2017, Advanced materials.

[58]  Yang Yang,et al.  The Interplay between Trap Density and Hysteresis in Planar Heterojunction Perovskite Solar Cells. , 2017, Nano letters.

[59]  Wei Zhang,et al.  Tailoring Organic Cation of 2D Air‐Stable Organometal Halide Perovskites for Highly Efficient Planar Solar Cells , 2017 .

[60]  J. M. Gardner,et al.  Layered 2D alkyldiammonium lead iodide perovskites: synthesis, characterization, and use in solar cells , 2016 .

[61]  Chien-Hung Chiang,et al.  Film Grain-Size Related Long-Term Stability of Inverted Perovskite Solar Cells. , 2016, ChemSusChem.

[62]  A. Jen,et al.  Defect Passivation of Organic–Inorganic Hybrid Perovskites by Diammonium Iodide toward High-Performance Photovoltaic Devices , 2016 .

[63]  Zhike Liu,et al.  Efficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity , 2016, Nature Communications.

[64]  Omar K Farha,et al.  2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications. , 2015, Journal of the American Chemical Society.

[65]  Alan J. Heeger,et al.  Barium: An Efficient Cathode Layer for Bulk-heterojunction Solar Cells , 2013, Scientific Reports.

[66]  Fuzhi Huang,et al.  Vertically oriented two-dimensional Ruddlesden–Popper phase perovskite passivation layer for efficient and stable inverted perovskite solar cells , 2022, Energy & Environmental Science.

[67]  Yani Chen,et al.  2D Ruddlesden–Popper Perovskites for Optoelectronics , 2018, Advanced materials.