Primary fabric fraction analysis of granular soils

Granular soil can be considered as a composition of two fractions of particles; an immobile part called the primary fabric, and loose particles located in the voids formed by the immobile part considered to be potentially mobile. The primary fabric transfers momentum through force chains formed by interconnected force chains. These force chains form pores where loose particles are located. As a consequence, loose particles can be mobilised very easily under the influence of seepage flow and transported away if the geometrical conditions of the pore structure allows it. Therefore, the determination of the primary fabric fraction, as well as loose particle fraction, is of vital importance especially in soil suffusion predictions, which must be thoroughly considered in the design of hydraulic structures or their risk assessment. This paper presents a new method to simulate the behaviour of soils under stress and introduces a numerical analysis to define the primary fabric fraction. To achieve this, soil specimens are built by a new sequential packing method, which employs trilateration equations for packing. Later, specimens are compacted under oedometric conditions using the discrete element method to observe how the loading force is distributed across the solid matrix and to identify the fraction of the soil sustaining the external force. The primary fabric fraction analysis is conducted on two types of soil particle arrangements with several grain size distributions. A striking finding of this study is that the portion of the soil belonging to the primary fabric greatly depends on the structural packing of the granular particles. This finding should be used as evidence for the formulation of more accurate criteria for the prediction of suffusion and erosion in the future.

[1]  T. C. Kenney,et al.  Controlling constriction sizes of granular filters , 1985 .

[2]  T. Shire,et al.  Micromechanical assessment of an internal stability criterion , 2013 .

[3]  U. Schuler,et al.  Filters in Geotechnical and Hydraulic Engineering , 1993 .

[4]  Eugenio Oñate,et al.  Advances in the particle finite element method (PFEM) for solving coupled problems in engineering , 2010 .

[5]  Buddhima Indraratna,et al.  Assessing the Potential of Internal Erosion and Suffusion of Granular Soils , 2011 .

[6]  T. C. Kenney,et al.  Internal stability of granular filters , 1985 .

[7]  Eric Vincens,et al.  A computational procedure to assess the distribution of constriction sizes for an assembly of spheres , 2010 .

[8]  S. M. Johnson,et al.  Efficient generation of densely packed convex polyhedra for 3D discrete and finite‐discrete element methods , 2013 .

[9]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[10]  D. Stoyan,et al.  Statistical Analysis of Simulated Random Packings of Spheres , 2002 .

[11]  Karl Josef Witt,et al.  Variability of the grain size distribution of a soil related to suffusion , 2011 .

[12]  David J. Williams,et al.  A new simple model for the determination of the pore constriction size distribution , 2012 .

[13]  S. Luding Cohesive, frictional powders: contact models for tension , 2008 .

[14]  Katalin Bagi,et al.  An algorithm to generate random dense arrangements for discrete element simulations of granular assemblies , 2005 .

[15]  J. D. Muñoz,et al.  Minkowski-Voronoi diagrams as a method to generate random packings of spheropolygons for the simulation of soils. , 2010, Physical review. E, Statistical, nonlinear, and soft matter physics.

[16]  L. Scholtès,et al.  Multiscale approaches to describe mechanical responses induced by particle removal in granular materials , 2010 .

[17]  G. Maier,et al.  NONASSOCIATED AND COUPLED FLOW RULES OF ELASTOPLASTICITY FOR ROCK-LIKE MATERIALS , 1979 .

[18]  Buddhima Indraratna,et al.  TIME-DEPENDENT PARTICLE TRANSPORT THROUGH GRANULAR FILTERS , 2001 .

[19]  Félix Darve,et al.  Numerical simulation of drained triaxial test using 3D discrete element modeling , 2009 .

[20]  Karl Josef Witt,et al.  Approaches to determine the constriction size distribution for understanding filtration phenomena in granular materials , 2015 .

[21]  R. Fell,et al.  The statistics of embankment dam failures and accidents , 2000 .

[22]  Buddhima Indraratna,et al.  Constriction-based retention criterion for granular filter design , 2007 .

[23]  Gian Antonio D'Addetta,et al.  Discrete models for cohesive frictional materials , 2004 .

[24]  Robin Fell,et al.  Assessing the Potential of Internal Instability and Suffusion in Embankment Dams and Their Foundations , 2008 .

[25]  S. A. Galindo-Torres,et al.  A micro-mechanical approach for the study of contact erosion , 2015 .

[26]  A. Skempton,et al.  Experiments on piping in sandy gravels , 1994 .

[27]  Ling Li,et al.  Breaking processes in three-dimensional bonded granular materials with general shapes , 2012, Comput. Phys. Commun..