Validation of SHRP asphalt mixture specifications using accelerated testing: final report

[1]  R J Cominsky,et al.  SUPERIOR PERFORMING ASPHALT PAVEMENTS (SUPERPAVE): THE PRODUCT OF THE SHRP ASPHALT RESEARCH PROGRAM , 1994 .

[2]  R J Cominsky,et al.  LEVEL ONE MIX DESIGN: MATERIALS SELECTION, COMPACTION, AND CONDITIONING , 1994 .

[3]  H L Von Quintus,et al.  SPECIMEN GEOMETRY AND AGGREGATE SIZE EFFECTS IN UNIAXIAL COMPRESSION AND CONSTANT HEIGHT SHEAR TESTS , 2000 .

[4]  W K Parr,et al.  GYRATORY TESTING MACHINE PROCEDURES FOR SELECTING THE DESIGN ASPHALT CONTENT OF PAVING MIXTURES , 1964 .

[5]  John A. Hinrichsen,et al.  Minimum Voids in Mineral Aggregate in Hot-Mix Asphalt Based on Gradation and Volumetric Properties , 1996 .

[6]  George L Regan.  A Laboratory Study of Asphalt Concrete Mix Designs for High-Contact Pressure Aircraft Traffic , 1987 .

[7]  Thomas D. White,et al.  NATIONAL POOLED FUND STUDY NO. 176: VALIDATION OF SHRP ASPHALT MIXTURE SPECIFICATIONS USING ACCELERATED TESTING , 2000 .

[8]  Thomas D. White,et al.  MINIMUM CRUSHED AGGREGATE REQUIREMENTS , 1997 .

[9]  Hussain U Bahia,et al.  Evaluation and Selection of Aggregate Gradations for Asphalt Mixtures Using Superpave , 1997 .

[10]  James A Scherocman,et al.  ASPHALT-AGGREGATE MIXTURE ANALYSIS SYSTEM: AAMAS , 1991 .

[11]  Rajib B. Mallick,et al.  A CRITICAL REVIEW OF VMA REQUIREMENTS IN SUPERPAVE , 1998 .

[12]  B A Vallerga,et al.  RELATIONSHIP BETWEEN DENSITY AND STABILITY OF ASPHALTIC PAVING MIXTURES , 1956 .

[13]  R J Cominsky,et al.  THE SUPERPAVE MIX DESIGN MANUAL FOR NEW CONSTRUCTION AND OVERLAYS , 1994 .

[14]  I. A. Al-Dubabe,et al.  NATIONAL STUDY OF ASPHALT PAVEMENT RUTTING IN SAUDI ARABIA , 1995 .

[15]  Richard E. Goodman,et al.  Methods of Geological Engineering in Discontinuous Rocks , 1975 .

[16]  B. Prowell,et al.  Comparison of Laboratory Wheel-Tracking Test Results with Wes Track Performance , 1999 .

[17]  E R Brown,et al.  A STUDY OF RUTTING OF ALABAMA ASPHALT PAVEMENTS , 1993 .

[18]  Changlin Pan.  Analysis of bituminous mixtures stripping/rutting potential , 1997 .

[19]  Jacob Uzan,et al.  VISCO-ELASTO-PLASTIC CONSTITUTIVE LAW FOR A BITUMINOUS MIXTURE UNDER REPEATED LOADING , 1983 .

[20]  M S Buchanan,et al.  CONSOLIDATION OF THE N SUB DESIGN COMPACTION MATRIX AND EVALUATION OF GYRATORY COMPACTION REQUIREMENTS , 1999 .

[21]  Brian J. Coree,et al.  Difficult Nature of Minimum Voids in the Mineral Aggregate: Historical Perspective , 1999 .

[22]  Norman McLeod.  Void Requirements for Dense-Graded Bituminous Paving Mixtures , 1959 .

[23]  Ga Huber,et al.  Providing Sufficient Void Space for Asphalt Cement: Relationship of Mineral Aggregate Voids and Aggregate Gradation , 1992 .

[24]  T. W. Kennedy,et al.  Background of Superpave Asphalt Mixture Design and Analysis , 1995 .

[25]  Robert L. Lytton.  Characterizing Asphalt Pavements for Performance , 2000 .

[26]  Haiming Huang.  Analysis of accelerated pavement tests and finite element modeling of rutting phenomenon , 1995 .

[27]  Adam J. T. Hand.  Relationships between laboratory measured HMA material and mixture properties and pavement performance at WesTrack , 1998 .

[28]  M De Beer,et al.  DETERMINATION OF PNEUMATIC TYRE/PAVEMENT INTERFACE CONTACT STRESSES UNDER MOVING LOADS AND SOME EFFECTS ON PAVEMENTS WITH THIN ASPHALT SURFACING LAYERS , 1997 .