Physically-based constitutive models for hot gas pressure forming of laser-welded titanium alloy blank

[1]  S. Panda,et al.  Uniaxial tensile deformation behaviour of electron beam welded commercially pure titanium and Ti6Al4V joints: Experimental and metallurgical characterization , 2022, Journal of Manufacturing Processes.

[2]  Z. Du,et al.  The superplastic forming/diffusion bonding of TA7 titanium alloy for manufacturing hollow structure with stiffeners , 2022, Journal of Manufacturing Processes.

[3]  Minghe Chen,et al.  A physically based constitutive model of Ti-6Al-4 V and application in the SPF/DB process for a pyramid lattice sandwich panel , 2021, Archives of Civil and Mechanical Engineering.

[4]  H. Mirzadeh.  High strain rate superplasticity via friction stir processing (FSP): A review , 2021, Materials Science and Engineering: A.

[5]  Zhong-qin Lin,et al.  Constitutive modeling of TA15 alloy sheet coupling phase transformation in non-isothermal hot stamping process , 2021 .

[6]  Arvind Kumar,et al.  Formability of tailor welded blanks of high strength steel: A review , 2021 .

[7]  Naksoo Kim,et al.  Determination of plastic properties of weld metals using an optimal regression of tensile and hardness test data , 2021 .

[8]  Gang Liu,et al.  Enhanced formability and forming efficiency for two-phase titanium alloys by Fast light Alloys Stamping Technology (FAST) , 2020 .

[9]  Kun Wang,et al.  Determination of continuous constitutive relationship of weld zone of high-strength steel rectangular welded tube , 2020 .

[10]  Gang Liu,et al.  High-efficiency forming processes for complex thin-walled titanium alloys components: state-of-the-art and perspectives , 2020, International Journal of Extreme Manufacturing.

[11]  Wenjing Zhang,et al.  Superplastic deformation mechanism of the friction stir processed fully lamellar Ti-6Al-4V alloy , 2020 .

[12]  J. Jonas,et al.  Accelerated flow softening and dynamic transformation of Ti-6Al-4V alloy in two-phase region during hot deformation via coarsening α grain , 2020 .

[13]  Yang Jin,et al.  Microstructure and mechanical properties of electron beam welded TC4/TA7 dissimilar titanium alloy joint , 2020 .

[14]  Jianguo Lin,et al.  Constitutive modeling for the simulation of the superplastic forming of TA15 titanium alloy , 2019 .

[15]  R. Reed,et al.  Alloys-by-design: Application to titanium alloys for optimal superplasticity , 2019, Acta Materialia.

[16]  Ahmed O. Mosleh,et al.  Experimental, modelling and simulation of an approach for optimizing the superplastic forming of Ti-6%Al-4%V titanium alloy , 2019, Journal of Manufacturing Processes.

[17]  Liliang Wang,et al.  Transition of failure mode in hot stamping of AA6082 tailor welded blanks , 2018, Journal of Materials Processing Technology.

[18]  M. Zhan,et al.  A method for establishing a continuous constitutive model of welded metals , 2018 .

[19]  A. Assempour,et al.  Experimental investigation of mechanical properties, formability and forming limit diagrams for tailor-welded blanks produced by friction stir welding , 2018 .

[20]  W. Tao,et al.  Study on the mixed dynamic recrystallization mechanism during the globularization process of laser-welded TA15 Ti-alloy joint under hot tensile deformation , 2017 .

[21]  Baoyu Wang,et al.  Microstructure evolution and constitutive equations for the high-temperature deformation of 5Cr21Mn9Ni4N heat-resistant steel , 2017 .

[22]  Gang Liu,et al.  Formability and microstructure of Ti22Al24.5Nb0.5Mo rolled sheet within hot gas bulging tests at constant equivalent strain rate , 2016 .

[23]  Gang Liu,et al.  Formability and microstructure evolution for hot gas forming of laser-welded TA15 titanium alloy tubes , 2016 .

[24]  Gang Liu,et al.  Behavior and modeling of flow softening and ductile damage evolution in hot forming of TA15 alloy sheets , 2015 .

[25]  Jianguo Lin,et al.  Size-dependent mechanical properties in AA6082 tailor welded specimens , 2015 .

[26]  R. Reed,et al.  Superplasticity in Ti–6Al–4V: Characterisation, modelling and applications , 2015 .

[27]  B. Xiao,et al.  Achieving superior superplasticity from lamellar microstructure of a nugget in a friction-stir-welded Ti-6Al-4V joint , 2015 .

[28]  M. Horstmann,et al.  Microstructure and Mechanical Properties of Laser Beam Welded Joints between Fine‐Grained and Standard Ti‐6Al‐4V Sheets Subjected to Superplastic Forming , 2015 .

[29]  Omer El Fakir,et al.  Numerical study of the solution heat treatment, forming, and in-die quenching (HFQ) process on AA5754 , 2014 .

[30]  Qing Li,et al.  Identification of mechanical properties of the weld line by combining 3D digital image correlation with inverse modeling procedure , 2014, The International Journal of Advanced Manufacturing Technology.

[31]  Q. Chao,et al.  Ultrafine Grain Formation in a Ti-6Al-4V Alloy by Thermomechanical Processing of a Martensitic Microstructure , 2014, Metallurgical and Materials Transactions A.

[32]  Marion Merklein,et al.  A review on tailored blanks—Production, applications and evaluation , 2014 .

[33]  Jianguo Lin,et al.  Modelling of dominant softening mechanisms for Ti-6Al-4V in steady state hot forming conditions , 2013 .

[34]  Jian Lan,et al.  Characterization of the inhomogeneous constitutive properties of laser welding beams by the micro-Vickers hardness test and the rule of mixture , 2012 .

[35]  Xingke Zhao,et al.  Superplastic deformation mechanism and mechanical behavior of a laser-welded Ti–6Al–4V alloy joint , 2012 .

[36]  Jianguo Lin,et al.  Modelling of microstructure evolution in hot forming using unified constitutive equations , 2005 .

[37]  Y. Liu,et al.  Development of dislocation-based unified material model for simulating microstructure evolution in multipass hot rolling , 2005 .

[38]  B. J. McCoy,et al.  Distribution kinetics of polymer crystallization and the Avrami equation. , 2005, The Journal of chemical physics.

[39]  Y. Liu,et al.  A set of unified constitutive equations for modelling microstructure evolution in hot deformation , 2003 .

[40]  J. Jeswiet,et al.  Tensile testing for weld deformation properties in similar gage tailor welded blanks using the rule of mixtures , 2001 .