A newly constructed Linear Experimental Advanced Device LEAD

[1]  S. Gong,et al.  Radially inward particle transport driven by low-frequency instability in cylindrical magnetized plasma , 2023, Plasma Physics and Controlled Fusion.

[2]  S. Liu,et al.  Design of PLC and EPICS based control system for a deuteron RFQ , 2022, Journal of Instrumentation.

[3]  Yuanrong Lu,et al.  Development of a Radio-Frequency Quadrupole Accelerator for the HL-2A/2M Tokamak Diagnostic System , 2022, Applied Sciences.

[4]  J. Artaud,et al.  Progress of HL-2A experiments and HL-2M program , 2021, Nuclear Fusion.

[5]  Y. Yu,et al.  Design of a Lyman-Alpha-Based BES for edge plasma density diagnosing on the HL-2A tokamak , 2021, Fusion Engineering and Design.

[6]  Y. Yu,et al.  A large-area planar helicon plasma source with a multi-ring antenna on Linear Experimental Advanced Device (LEAD) , 2020, Journal of Instrumentation.

[7]  J.,et al.  Overview of HL-2A recent experiments , 2019, Nuclear Fusion.

[8]  M. Ye,et al.  Design of magnetic configurations for the linear plasma device LEAD , 2019, Fusion Engineering and Design.

[9]  S. Masuzaki,et al.  Impact of additional plasma heating on detached plasma formation in divertor simulation experiments using the GAMMA 10/PDX tandem mirror , 2019, Nuclear Materials and Energy.

[10]  M. Baar,et al.  Operational characteristics of the superconducting high flux plasma generator Magnum-PSI , 2018, Fusion Engineering and Design.

[11]  H. J. Wang,et al.  Electron cyclotron resonance plasma excitation in a toroidal plasma , 2018, AIP Advances.

[12]  Ming Liu,et al.  Ion cyclotron resonant heating in the central cell of the Keda Mirror with AXisymmetricity (KMAX) , 2018, Physics of Plasmas.

[13]  Ming Liu,et al.  Ion cyclotron resonance heating (ICRH) systems for the Keda Mirror with AXisymmetry (KMAX). , 2017, The Review of scientific instruments.

[14]  N. Cardozo,et al.  Liquid metals as a divertor plasma-facing material explored using the Pilot-PSI and Magnum-PSI linear devices , 2017 .

[15]  Yihang Chen,et al.  Plasma rotation in the Peking University Plasma Test device. , 2016, The Review of scientific instruments.

[16]  R. Goulding,et al.  Developing the science and technology for the Material Plasma Exposure eXperiment , 2016 .

[17]  M. Shimada,et al.  TPE upgrade for enhancing operational safety and improving in-vessel tritium inventory assessment in fusion nuclear environment , 2016 .

[18]  G. Tynan,et al.  Formation of the Blue Core in Argon Helicon Plasma , 2015, IEEE Transactions on Plasma Science.

[19]  R. Goulding,et al.  The Material Plasma Exposure eXperiment MPEX: Pre-design, development and testing of source concept , 2015, 2015 IEEE 26th Symposium on Fusion Engineering (SOFE).

[20]  R. Doerner,et al.  Plasma-induced morphology of beryllium targets exposed in PISCES-B , 2014 .

[21]  G. Tynan,et al.  Multi-instability plasma dynamics during the route to fully developed turbulence in a helicon plasma , 2014 .

[22]  S. Masuzaki,et al.  In situ measurement of hydrogen isotope retention using a high heat flux plasma generator with ion beam analysis , 2011 .

[23]  P. Diamond,et al.  Generation of a sheared plasma rotation by emission, propagation, and absorption of drift wave packets. , 2010, Physical review letters.

[24]  Changxuan Yu,et al.  Compatible operation of the power system for steady state and pulse modes in a magnetic torus KT-5D , 2006 .

[25]  G. Tynan,et al.  On the transition to drift turbulence in a magnetized plasma column , 2005 .

[26]  M. Ye,et al.  Characteristic changes of deuterium retention on tungsten surfaces due to low-energy helium plasma pre-exposure , 2005 .

[27]  M. Kushner,et al.  H- to W-mode transitions and properties of a multimode helicon plasma reactor , 2003 .

[28]  Y. Uesugi,et al.  Characteristics of detached plasmas associated with electron-ion and molecular assisted recombinations in NAGDIS-II , 2002 .

[29]  Roderick Boswell,et al.  Capacitive, inductive and helicon‐wave modes of operation of a helicon plasma source , 1996 .

[30]  D. Leneman,et al.  Design, construction, and properties of the large plasma research device : the LAPD at UCLA , 1991 .