Methodology – A Review of Intelligent Manufacturing: Scope, Strategy and Simulation

This paper presents a critical review of some existing modelling, control and optimization techniques for energy saving, carbon emission reduction in manufacturing processes. The study on various production issues reveals different levels of intelligent manufacturing approaches. Then methods and strategies to tackle the sustainability issues in manufacturing are summarized. Modelling tools such as discrete (dynamic) event system (DES/DEDS) and agent-based modelling/simulation (ABS) approaches are reviewed from the production planning and control prospective. These approaches will provide some guidelines for the development of advanced factory modelling, resource flow analysis and assisting the identification of improvement potentials, in order to achieve more sustainable manufacturing.

[1]  Giancarlo Scalabrin,et al.  A corresponding states predictive viscosity model based on a new scaling parameter: application to hydrocarbons, halocarbons and mixtures , 2002 .

[2]  Christoph Herrmann,et al.  Energy oriented simulation of manufacturing systems - Concept and application , 2011 .

[3]  Mehmet Bayram Yildirim,et al.  Single-Machine Sustainable Production Planning to Minimize Total Energy Consumption and Total Completion Time Using a Multiple Objective Genetic Algorithm , 2012, IEEE Transactions on Engineering Management.

[4]  Ling Wang,et al.  Reduction of carbon emissions and project makespan by a Pareto-based estimation of distribution algorithm , 2015 .

[5]  André Zein,et al.  Transition Towards Energy Efficient Machine Tools , 2012 .

[6]  Yan Wang,et al.  Dynamic parts scheduling in multiple job shop cells considering intercell moves and flexible routes , 2013, Comput. Oper. Res..

[7]  Nasrudin Abd Rahim,et al.  A review on compressed-air energy use and energy savings , 2010 .

[8]  Jing Yang,et al.  Sustainable performance oriented operational decision-making of single machine systems with deterministic product arrival time , 2014 .

[9]  W. L. Yeung,et al.  Behavioral modeling and verification of multi-agent systems for manufacturing control , 2011, Expert Syst. Appl..

[10]  Damien Trentesaux,et al.  Sustainability in Manufacturing Operations Scheduling: Stakes, Approaches and Trends , 2014, APMS.

[11]  Amran Rasli,et al.  Productivity Through Effectiveness and Efficiency in the Banking Industry , 2012 .

[12]  Jigeng Li,et al.  Process Parameters Optimization for Energy Saving in Paper Machine Dryer Section , 2011 .

[13]  Corinne Reich-Weiser,et al.  Appropriate use of Green Manufacturing Frameworks , 2010 .

[14]  Carsten Franke,et al.  Remanufacturing of mobile phones—capacity, program and facility adaptation planning , 2006 .

[15]  Michael L. Gregg,et al.  Lean+ manufacturing process analysis simulation (LPAS+) , 2011, Proceedings of the 2011 Winter Simulation Conference (WSC).

[16]  Jihun Yu,et al.  Steel-yard planning support system: Optimizing the steel-yard planning and performance evaluation with simulation , 2012, 2012 12th International Conference on Control, Automation and Systems.

[17]  Cheng-Hsiang Liu,et al.  Approximate trade-off between minimisation of total weighted tardiness and minimisation of carbon dioxide (CO2) emissions in bi-criteria batch scheduling problem , 2014, Int. J. Comput. Integr. Manuf..

[18]  Jorge Arinez,et al.  Performance analysis for serial production lines with Bernoulli Machines and Real-time WIP-based Machine switch-on/off control , 2016 .

[19]  Stewart Robinson,et al.  Simulation: The Practice of Model Development and Use , 2004 .

[20]  Luis Puigjaner,et al.  Environmental considerations in batch production scheduling , 1995 .

[21]  Damien Trentesaux,et al.  Sustainability in manufacturing operations scheduling: A state of the art review , 2015 .

[22]  Adriana Giret,et al.  A metaheuristic technique for energy-efficiency in job-shop scheduling , 2016, The Knowledge Engineering Review.

[23]  Martin Brown,et al.  Data-Based Robust Multiobjective Optimization of Interconnected Processes: Energy Efficiency Case Study in Papermaking , 2011, IEEE Transactions on Neural Networks.

[24]  Majda Bastič,et al.  Incorporation of reverse logistics model into in-plant recycling process: A case of aluminium industry , 2006 .

[25]  Andrew Jarvis,et al.  Strategies for Minimum Energy Operation for Precision Machining , 2009 .

[26]  Makoto Fujishima,et al.  A study on energy efficiency improvement for machine tools , 2011 .

[27]  Dragan Stokic,et al.  Energy efficiency improvement through context sensitive self-learning of machine availability , 2011, 2011 9th IEEE International Conference on Industrial Informatics.

[28]  Hongguang Jin,et al.  Energy integration of acetylene and power polygeneration by flowrate-exergy diagram , 2009 .

[29]  Krassimir Dotchev,et al.  Recycling of polyamide 12 based powders in the laser sintering process , 2009 .

[30]  Günther Seliger,et al.  Methodology for planning and operating energy-efficient production systems , 2011 .

[31]  Arnd Schirrmann,et al.  Industrial Applications of Holonic and Multi-Agent Systems , 2015, Lecture Notes in Computer Science.

[32]  László Monostori,et al.  Agent-based systems for manufacturing , 2006 .

[33]  Wim Dewulf,et al.  Methodology for systematic analysis and improvement of manufacturing unit process life cycle inventory (UPLCI) Part 1: Methodology Description , 2011 .

[34]  Taedong Kim,et al.  Production system-based simulation for backward on-line job change scheduling , 2014, Simul. Model. Pract. Theory.

[35]  Gitae Kim,et al.  A survey of simulation modeling techniques in production planning and control (PPC) , 2016 .

[36]  Ahmed Azab,et al.  Simulation Methods for Changeable Manufacturing , 2012 .

[37]  Xiao-hong Zhang,et al.  Comparison and Optimization of Mid-low Temperature Cogeneration Systems for Flue Gas in Iron and Steel Plants , 2013 .

[38]  B. Costa,et al.  Simulation as a tool for planning a material delivery system to manufacturing lines , 2008, 2008 IEEE International Engineering Management Conference.

[39]  Sachin U. Nimbalkar,et al.  Industrial Waste Heat Recovery - Potential Applications, Available Technologies and Crosscutting R&D Opportunities , 2015 .

[40]  Joost Duflou,et al.  Environmental Performance of Sheet Metal Working Processes , 2011 .

[41]  Mehmet Bayram Yildirim,et al.  A framework to minimise total energy consumption and total tardiness on a single machine , 2008 .

[42]  Adriana Giret,et al.  Energy-efficient scheduling for a flexible flow shop using an improved genetic-simulated annealing algorithm , 2013 .

[43]  Sami Kara,et al.  Towards Energy and Resource Efficient Manufacturing: A Processes and Systems Approach , 2012 .

[44]  H. Van Dyke Parunak,et al.  Agent-Based Modeling vs. Equation-Based Modeling: A Case Study and Users' Guide , 1998, MABS.

[45]  Agostino Villa,et al.  Modeling manufacturing systems , 1999 .

[46]  Eberhard Abele,et al.  Environmentally-Friendly Product Development , 2005 .

[47]  Agostino Villa,et al.  Modeling manufacturing systems : from aggregate planning to real-time control , 1999 .

[48]  Bengt Lennartson,et al.  Embedding detailed robot energy optimization into high-level scheduling , 2010, 2010 IEEE International Conference on Automation Science and Engineering.

[49]  Ferenc Friedler,et al.  Effective scheduling of a large-scale paint production system , 2008 .

[50]  A. Bejan.  Fundamentals of exergy analysis, entropy generation minimization, and the generation of flow architecture , 2002 .

[51]  George Q. Huang,et al.  Hybrid flow shop scheduling considering machine electricity consumption cost , 2013 .

[52]  Arpad Horvath,et al.  Green Manufacturing and Sustainable Manufacturing Partnership Title Environmental Analysis of Milling Machine Tool Use in Various Manufacturing Environments , 2022 .

[53]  Hongwei Ding,et al.  A low-carbon production scheduling system considering renewable energy , 2011, Proceedings of 2011 IEEE International Conference on Service Operations, Logistics and Informatics.

[54]  Wim Dewulf,et al.  Methodology for systematic analysis and improvement of manufacturing unit process life cycle inventory (UPLCI) CO2PE! initiative (cooperative effort on process emissions in manufacturing). Part 2: case studies , 2012, The International Journal of Life Cycle Assessment.

[55]  W. L. Yeung,et al.  A formal and visual modeling approach to choreography based web services composition and conformance verification , 2011, Expert Syst. Appl..

[56]  Emmanuel Kakaras,et al.  Energetic and exergetic analysis of waste heat recovery systems in the cement industry , 2013 .

[57]  Fazhi He,et al.  A honey-bee mating optimization approach of collaborative process planning and scheduling for sustainable manufacturing , 2013, Proceedings of the 2013 IEEE 17th International Conference on Computer Supported Cooperative Work in Design (CSCWD).

[58]  Joaquín B. Ordieres Meré,et al.  Optimizing the production scheduling of a single machine to minimize total energy consumption costs , 2014 .

[59]  Christoph Herrmann,et al.  Process chain simulation to foster energy efficiency in manufacturing , 2009 .