Photonic generation of microwave signal using a dual-wavelength single-longitudinal-mode distributed Bragg reflector fiber laser

Abstract In this paper, a novel all-optical microwave generation technique based on a dual-wavelength single-longitudinal-mode (SLM) distributed Bragg reflector (DBR) fiber laser is proposed and demonstrated. By exploiting spatial hole burning (SHB) effect, this laser could provide stable dual-wavelength SLM operation with a wavelength separation of ∼0.088 nm corresponding to the microwave signal at ∼10.484 GHz with a 3 dB bandwidth of ∼28 kHz. By appropriately adjusting the pump power, dual-wavelength oscillation could be maintained at different temperatures. We have theoretically analyzed the mechanism for microwave generation of the proposed DBR laser, and the calculated microwave frequency is in good agreement with our experimental results. Furthermore, experimental observation shows both of the laser wavelengths and generated microwave signals have good stability at room temperature.

[1]  J. Zayhowski,et al.  Limits imposed by spatial hole burning on the single-mode operation of standing-wave laser cavities. , 1990, Optics letters.

[2]  All-fiber incoherent frequency-to-time mapping method for microwave signal generation with baseband transmission and multicasting support , 2008 .

[3]  E. Desurvire,et al.  Spectral gain hole-burning at 1.53 mu m in erbium-doped fiber amplifiers , 1990, IEEE Photonics Technology Letters.

[4]  L. Xia,et al.  Photonic generation of tunable microwave signals by beating a dual-wavelength single longitudinal mode fiber ring laser , 2008 .

[5]  H. Taylor,et al.  Microwave signal generation with injection-locked laser diodes , 1983 .

[6]  J. O'Reilly,et al.  Optical generation of very narrow linewidth millimetre wave signals , 1992 .

[7]  T. Erdogan Fiber grating spectra , 1997 .

[8]  S. Frisken,et al.  Transient Bragg reflection gratings in erbium-doped fiber amplifiers. , 1992, Optics letters.

[9]  J. Leng,et al.  A new method for microwave generation and data transmission using DFB laser based on fiber Bragg gratings , 2006, IEEE Photonics Technology Letters.

[10]  N. Kagi,et al.  Temperature dependence of the gain in erbium-doped fibers , 1991 .

[11]  Sailing He,et al.  Dual-wavelength single-longitudinal-mode erbium-doped fibre laser based on fibre bragg grating pair and its application in microwave signal generation , 2008 .

[12]  Mario Dagenais,et al.  6-34 GHz offset phase-locking of Nd:YAG 1319 nm nonplanar ring lasers , 1989 .

[13]  Xianmin Zhang,et al.  All-optical generation of microwave and Millimeter wave using a two-frequency Bragg grating-based Brillouin fiber laser , 2005, Journal of Lightwave Technology.

[14]  Shuji Matsuura,et al.  Generation of millimetre-wave radiation using a dual-longitudinal-mode microchip laser , 1996 .

[15]  Shizhong Xie,et al.  Stable Dual-Wavelength DFB Fiber Laser With Separate Resonant Cavities and Its Application in Tunable Microwave Generation , 2006, IEEE Photonics Technology Letters.

[16]  Martin Chamberland,et al.  Microwave signals generated by optical heterodyne between injection-locked semiconductor lasers , 1997 .

[17]  Jianping Yao,et al.  Photonic generation of microwave signal using a dual-wavelength single-longitudinal-mode fiber ring laser , 2006 .

[18]  R. Laming,et al.  Temperature dependent gain and noise characteristics of a 1480 nm-pumped erbium-doped fibre amplifier , 1990 .

[19]  Zhichao Deng,et al.  Photonic generation of microwave signal using a rational harmonic mode-locked fiber ring laser , 2006 .

[20]  Shizhong Xie,et al.  Dual-wavelength erbium-doped fiber laser with a simple linear cavity and its application in microwave generation , 2006 .

[22]  Dobryna Zalvidea,et al.  Effective length of short Fabry-Perot cavity formed by uniform fiber Bragg gratings. , 2006, Optics express.