Vibration Assisted Conventional and Advanced Machining: A Review☆

Abstract Increasing demand for precision miniaturised components made of hard and brittle materials can no longer meet the requirements by conventional machining and advanced machining processes. To facilitate high precision machining, vibration is introduced in any of workpiece, tool and working medium, which is called Vibration Assisted Machining (VAM). In this review, the advancements of VAM in conventional machining as well as in advanced machining are presented. In detail, general overview, classifications, basic kinematics of 1-D and 2-D VAM, chip formation and instrumental implementation issues of VAM, are discussed. In addition to this the reasons for improvements in machining process and promising areas to be explored in VAM are summarized.

[1]  Sandip Patil,et al.  Modelling and simulation of effect of ultrasonic vibrations on machining of Ti6Al4V. , 2014, Ultrasonics.

[2]  Saudi Arabia,et al.  Ultrasonically Assisted Turning: Effects on Surface Roughness , 2013 .

[3]  Kai Cheng,et al.  Experimental study on machinability improvement of hardened tool steel using two dimensional vibration-assisted micro-end-milling , 2010 .

[4]  V. Silberschmidt,et al.  A Finite Element Model of Ultrasonically Assisted Drilling in Carbon/Epoxy Composites , 2013 .

[5]  Sung-Hak Cho,et al.  Vibration assisted femtosecond laser machining on metal , 2012 .

[6]  Riaz Muhammad,et al.  Numerical Modelling of Vibration-Assisted Turning of Ti-15333 , 2012 .

[7]  Ping Guo,et al.  An analysis of the surface generation mechanics of the elliptical vibration texturing process , 2013 .

[8]  Sagil James,et al.  A Feasibility Study of Vibration-Assisted Nano-Impact Machining by Loose Abrasives Using Atomic Force Microscope , 2012 .

[10]  Javad Akbari,et al.  Investigating the effects of vibration method on ultrasonic-assisted drilling of Al/SiCp metal matrix composites , 2014 .

[11]  Sung-Hak Cho,et al.  A study on the effect of ultrasonic vibration in nanosecond laser machining , 2012 .

[12]  Y. Tang,et al.  Experimental Research of Al6061 on Ultrasonic Vibration Assisted Micro-Milling☆ , 2013 .

[14]  N. A. Mardi,et al.  The Seventeenth CIRP Conference on Electro Physical and Chemical Machining (ISEM) Applying ultrasonic vibration to decrease drilling-induced delamination in GFRP laminates , 2013 .

[15]  Ryunosuke Sato,et al.  Material removal mechanisms in non-contact ultrasonic abrasive machining , 2005 .

[16]  Bijoy Bhattacharyya,et al.  Influence of vibration on micro-tool fabrication by electrochemical machining , 2013 .

[17]  Gary M. Bone,et al.  Thrust force model for vibration-assisted drilling of aluminum 6061-T6 , 2009 .

[18]  Alain Curodeau,et al.  Ultrasonic abrasive μ-machining with thermoplastic tooling , 2008 .

[19]  Takayuki Tsujimoto,et al.  Study of vibration-assisted micro-EDM-The effect of vibration on machining time and stability of discharge , 2008 .

[20]  S. Aoki,et al.  Prevention from Delamination of Composite Material during Drilling Using Ultrasonic Vibration , 2005 .

[21]  Muhammad Aziz,et al.  Novel micro deep drilling using micro long flat drill with ultrasonic vibration , 2012 .

[22]  Xibin Wang,et al.  A new two-dimensional ultrasonic assisted grinding (2D-UAG) method and its fundamental performance in monocrystal silicon machining , 2010 .

[23]  Deyuan Zhang,et al.  Feasibility study of the rotary ultrasonic elliptical machining of carbon fiber reinforced plastics (CFRP) , 2012 .

[24]  J. Costes,et al.  Cyclic Variation of Residual Stress Induced by Tool Vibration in Machining Operations , 2013 .

[25]  Sathyan Subbiah,et al.  Experimental investigation of transverse vibration-assisted orthogonal cutting of AL-2024 , 2010 .

[26]  M. Nategh,et al.  Theoretical and experimental investigation of the frictional behavior of the tool–chip interface in ultrasonic-vibration assisted turning , 2013 .

[27]  Jian-hua Zhang,et al.  Ultrasonic vibration-assisted milling of aluminum alloy , 2012, The International Journal of Advanced Manufacturing Technology.

[28]  Sebastian Skoczypiec,et al.  Research on ultrasonically assisted electrochemical machining process , 2011 .

[29]  James F. Cuttino,et al.  Design and experimental results of a tunable vibration turning device operating at ultrasonic frequencies , 2009 .

[30]  Eckart Uhlmann,et al.  Investigations on Vibration-Assisted EDM-Machining of Seal Slots in High-Temperature Resistant Materials for Turbine Components , 2013 .

[31]  Thomas A. Dow,et al.  Review of vibration-assisted machining , 2008 .

[32]  A. Kumar,et al.  Experimental study on ultrasonic elliptical vibration cutting of hardened steel using PCD tools , 2011 .

[33]  Christina Schmitt,et al.  Analysis of the Differences between Force Control and Feed Control Strategies during the Honing of Bores , 2012 .