Structural topology optimization with strength and heat conduction constraints

Abstract In this research, a topology optimization with constraints of structural strength and thermal conductivity is proposed. The coupled static linear elastic and heat conduction equations of state are considered. The optimization problem was formulated; viz., minimizing the volume under the constraints of p-norm stress and thermal compliance introducing the qp-relaxation method to avoid the singularity of stress-constraint topology optimization. The proposed optimization methodology is implemented employing the commonly used solid isotropic material with penalization (SIMP) method of topology optimization. The density function is updated using sequential linear programming (SLP) in the early stage of optimization. In the latter stage of optimization, the phase field method is employed to update the density function and obtain clear optimal shapes without intermediate densities. Numerical examples are provided to illustrate the validity and utility of the proposed methodology. Through these numerical studies, the dependency of the optima to the target temperature range due to the thermal expansion is confirmed. The issue of stress concentration due to the thermal expansion problem in the use of the structure in a wide temperature range is also clarified, and resolved by introducing a multi-stress constraint corresponding to several thermal conditions.

[1]  Luca Weisz,et al.  Design Sensitivity Analysis Of Structural Systems , 2016 .

[2]  M. Bendsøe Optimal shape design as a material distribution problem , 1989 .

[3]  M. Bruggi,et al.  A mixed FEM approach to stress‐constrained topology optimization , 2008 .

[4]  大崎 純,et al.  Optimization of finite dimensional structures , 2011 .

[5]  M. Zhou,et al.  The COC algorithm, Part II: Topological, geometrical and generalized shape optimization , 1991 .

[6]  Grant P. Steven,et al.  Displacement minimization of thermoelastic structures by evolutionary thickness design , 1999 .

[7]  G. Yoon Topological design of heat dissipating structure with forced convective heat transfer , 2010 .

[8]  Dong-Hoon Choi,et al.  Development of a novel phase-field method for local stress-based shape and topology optimization , 2014 .

[9]  Ole Sigmund,et al.  Compliant thermal microactuators , 1999 .

[10]  S. Nishiwaki,et al.  Topology optimization for thermal conductors considering design-dependent effects, including heat conduction and convection , 2009 .

[11]  G. Cheng,et al.  ε-relaxed approach in structural topology optimization , 1997 .

[12]  Yi Min Xie,et al.  Optimal selection of topologies for the minimum-weight design of continuum structures with stress constraints , 1999 .

[13]  M. Bendsøe,et al.  Topology optimization of heat conduction problems using the finite volume method , 2006 .

[14]  Xu Guo,et al.  Stress-related Topology Optimization via Level Set Approach , 2011 .

[15]  Yi Min Xie,et al.  Structural topology design with multiple thermal criteria , 2000 .

[16]  Han Ding,et al.  Nonlinear diffusions in topology optimization , 2004 .

[17]  Dong-Hoon Choi,et al.  Topology optimization considering static failure theories for ductile and brittle materials , 2012 .

[18]  Seonho Cho,et al.  Efficient topology optimization of thermo-elasticity problems using coupled field adjoint sensitivity analysis method , 2005 .

[19]  Grégoire Allaire Conception optimale de structures , 2007 .

[20]  M. Bendsøe,et al.  Topology Optimization: "Theory, Methods, And Applications" , 2011 .

[21]  G. Sved,et al.  Structural optimization under multiple loading , 1968 .

[22]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .

[23]  Shiwei Zhou,et al.  Topological design of structures and composite materials with multiobjectives , 2007 .

[24]  Tommi Kärkkäinen,et al.  Optimization of conducting structures by using the homogenization method , 2002 .

[25]  Arun L. Gain,et al.  Phase-field based topology optimization with polygonal elements: a finite volume approach for the evolution equation , 2012 .

[26]  Qing Li,et al.  THERMOELASTIC TOPOLOGY OPTIMIZATION FOR PROBLEMS WITH VARYING TEMPERATURE FIELDS , 2001 .

[27]  Gengdong Cheng,et al.  STUDY ON TOPOLOGY OPTIMIZATION WITH STRESS CONSTRAINTS , 1992 .

[28]  Akihiro Takezawa,et al.  Phase field method to optimize dielectric devices for electromagnetic wave propagation , 2014, J. Comput. Phys..

[29]  H. Rodrigues,et al.  A material based model for topology optimization of thermoelastic structures , 1995 .

[30]  Shiwei Zhou,et al.  Computational design of multi-phase microstructural materials for extremal conductivity , 2008 .

[31]  Qing Li,et al.  Evolutionary topology optimization for temperature reduction of heat conducting fields , 2004 .

[32]  F. Navarrina,et al.  Topology optimization of continuum structures with local and global stress constraints , 2009 .

[33]  Weihong Zhang,et al.  Topology optimization involving thermo-elastic stress loads , 2010 .

[34]  Ramana V. Grandhi,et al.  Stress-based design of thermal structures via topology optimization , 2016 .

[35]  Ren-Jye Yang,et al.  Stress-based topology optimization , 1996 .

[36]  M. Bendsøe,et al.  Topology optimization of continuum structures with local stress constraints , 1998 .

[37]  Ramana V. Grandhi,et al.  0 Th World Congress on Structural and Multidisciplinary Optimization Stress-based Topology Optimization of Thermal Structures , 2022 .

[38]  Julián A. Norato,et al.  Stress-based topology optimization for continua , 2010 .

[39]  Ines Gloeckner,et al.  Variational Methods for Structural Optimization , 2002 .

[40]  Xu Guo,et al.  Stress-related topology optimization of continuum structures involving multi-phase materials , 2014 .

[41]  Yi Min Xie,et al.  Shape and topology design for heat conduction by Evolutionary Structural Optimization , 1999 .

[42]  T. E. Bruns,et al.  Numerical methods for the topology optimization of structures that exhibit snap‐through , 2002 .

[43]  Jihong Zhu,et al.  Topology optimization of heat conduction problem involving design-dependent heat load effect , 2008 .

[44]  H. Ding,et al.  A level set method for topology optimization of heat conduction problem under multiple load cases , 2007 .

[45]  Ramana V. Grandhi,et al.  Stiffening of restrained thermal structures via topology optimization , 2013 .

[46]  Shinji Nishiwaki,et al.  Shape and topology optimization based on the phase field method and sensitivity analysis , 2010, J. Comput. Phys..

[47]  Michael Yu Wang,et al.  Optimal topology design of continuum structures with stress concentration alleviation via level set method , 2013 .

[48]  M. Bruggi On an alternative approach to stress constraints relaxation in topology optimization , 2008 .

[49]  Z. Kang,et al.  Topology optimization of continuum structures with Drucker-Prager yield stress constraints , 2012 .

[50]  G. Allaire,et al.  Shape optimization by the homogenization method , 1997 .

[51]  Ole Sigmund,et al.  Design of multiphysics actuators using topology optimization - Part I: One-material structures , 2001 .