ICS solar systems with two water tanks

Integrated collector storage (ICS) systems are compact solar water heaters, simple in construction, installation and operation. They are cheaper than flat plate thermosiphonic units, but their higher thermal losses make them suitable mainly for application in locations with favourable weather conditions. Aiming to the achievement of low system height and satisfactory water temperature stratification, new types of ICS systems with two horizontal cylindrical storage tanks, properly mounted in stationary CPC reflector troughs are suggested. The non-uniform distribution of solar radiation on the two absorbing surfaces is combined with the seasonal sun elevation, resulting to effective water heating. In addition, the inverted absorber concept design can be applied to ICS systems with two storage tanks. In this paper, we present the design and performance of double tank ICS solar systems, which are based on the combination of symmetric and asymmetric CPC reflectors with water storage tanks. The analytical equations of the collector geometry of all models are calculated with respect to the radius of the cylindrical water storage tank and the reflector rim angles. Experimental results for the variation of the water temperature inside storage tanks, the mean daily efficiency and the coefficient of thermal losses during night are given for all experimental models. The tests were performed without water draining and the results show that the double tank ICS systems are efficient in water temperature rise during day and satisfactory preservation of the hot water temperature during night, with the upper storage tank being more effective in performance in most of the studied models.

[1]  Yiannis Tripanagnostopoulos,et al.  Solar ICS systems with two cylindrical storage tanks , 1999 .

[2]  Yiannis Tripanagnostopoulos,et al.  Experimental study of CPC type ICS solar systems , 2004 .

[3]  P. Yianoulis,et al.  Integrated collector-storage systems with suppressed thermal losses , 1992 .

[4]  H. P. Garg,et al.  System performance of built-in-storage type solar water heater with transparent insulation , 1988 .

[5]  A. Goetzberger,et al.  Prospects for integrated storage collector systems in central Europe , 1987 .

[6]  Yiannis Tripanagnostopoulos,et al.  Integrated collector storage solar systems with asymmetric CPC reflectors , 2004 .

[7]  Yiannis Tripanagnostopoulos,et al.  ICS solar systems with horizontal cylindrical storage tank and reflector of CPC or involute geometry , 2004 .

[8]  Soteris A. Kalogirou,et al.  Performance enhancement of an integrated collector storage hot water system , 1999 .

[9]  Ari Rabl,et al.  Comparison of solar concentrators , 1975 .

[10]  Roland Winston,et al.  Principles of solar concentrators of a novel design , 1974 .

[11]  Mervyn Smyth,et al.  A comparative performance rating for an integrated solar collector/storage vessel with inner sleeves to increase heat retention , 1999 .

[12]  I. Kaptan,et al.  A theoretical and experimental investigation of a novel built-in-storage solar water heater , 1996 .

[13]  M. Sokolov,et al.  Analysis of an integral compact solar water heater , 1983 .

[14]  H. P. Garg.  Year round performance studies on a built-in storage type solar water heater at Jodhpur, India , 1975 .

[15]  A. Goetzberger,et al.  Single-tube integrated collector storage systems with transparent insulation and involute reflector , 1990 .

[16]  Yiannis Tripanagnostopoulos,et al.  CPC type integrated collector storage systems , 2002 .

[17]  H. P. Garg,et al.  Effect of baffle plate on the performance of built-in storage type solar water heater , 1983 .

[18]  A. Ecevit,et al.  A comparative evaluation of the performances of three built-in-storage-type solar water heaters , 1990 .

[19]  Yiannis Tripanagnostopoulos,et al.  ICS solar systems with horizontal (E–W) and vertical (N–S) cylindrical water storage tank , 2004 .