Optimal stiffener layout of plate/shell structures by bionic growth method

Bionic growth method, which is based on the growth mechanism of branch systems in nature, has been used as a new approach for structural topology design optimization. Currently, its application is limited because the iterative scheme in the optimization process is heuristic. This paper suggests a new approach combined with the bionic branch model and optimality criteria. Based on the Kuhn-Tucker optimality condition, an analytical iterative formula is derived. The minimum compliance problem with multi-loading condition, the maximum fundamental frequency problem and the multi-objective optimization problem are studied. Typical design examples are demonstrated to validate the effectiveness of the suggested approach. Compared with the current growth technique, the suggested approach is more effective, practicable and applicable. The results show that the new bionic growth method can effectively and flexibly deal with optimum stiffener layout design of plate/shell structures to achieve various design objectives, thus it provides a new solution approach for structural topology design optimization.

[1]  K. Maute,et al.  Conceptual design of aeroelastic structures by topology optimization , 2004 .

[2]  N. Olhoff,et al.  Optimum topology and reinforcement design of disk and plate structures with multiple stiffness and eigenfrequency objectives , 1999 .

[3]  D. Bojczuk,et al.  Optimization of layout and shape of stiffeners in 2D structures , 2008 .

[4]  Zhifeng Liu,et al.  Multidiscipline Topology Optimization of Stiffened Plate/Shell Structures Inspired by Growth Mechanisms of Leaf Veins in Nature , 2013 .

[5]  Marcelo H. Kobayashi,et al.  On a biologically inspired topology optimization method , 2010 .

[6]  S. Youn,et al.  Topology optimization of shell structures using adaptive inner-front (AIF) level set method , 2008 .

[7]  Li Yongxin.  A bionic venation growth algorithm for a stiffener layout in plate/shell structure , 2011 .

[8]  N. Karizumi,et al.  Illustrations of tree roots. , 1979 .

[9]  Youngjin Park,et al.  Raising natural frequencies of a structure via surface-grooving technique , 2007 .

[10]  Koetsu Yamazaki,et al.  Stiffener layout design for plate structures by growing and branching tree model (application to vibration-proof design) , 2004 .

[11]  John Rasmussen,et al.  Combined shape and reinforcement layout optimization of shell structures , 2004 .

[12]  N. Kikuchi,et al.  Topological design for vibrating structures , 1995 .

[13]  Silvana M. B. Afonso,et al.  Structural optimization strategies for simple and integrally stiffened plates and shells , 2005 .

[14]  Koetsu Yamazaki,et al.  Adaptive growth technique of stiffener layout pattern for plate and shell structures to achieve minimum compliance , 2005 .

[15]  Claus Mattheck,et al.  Design in Nature: Learning from Trees , 1998 .

[16]  Matteo Bruggi,et al.  Generating strut-and-tie patterns for reinforced concrete structures using topology optimization , 2009 .

[17]  Joy Ko,et al.  Tools and Design Strategies to Study Rib Growth , 2011 .