It has become apparent through experimentation at the micro- and nanolevels that the crystalline defects known as dislocations have significant effects on a material's properties. Accordingly, a complete material state description must include the characterization of the dislocated state. However, this characterization presents a twofold problem: resolution and representation. In general, high-resolution microscopy techniques are only useful for considering a few dislocations at a time, but automated high-speed methods are only capable of resolving dislocation densities well above the average density in a typical annealed metal. The second challenge is developing a method of representation for the dislocated state. Unlike most state quantities, dislocation lengths are not conserved and complete representation would require tracking of position, momentum, and interactions, as well as the creation and annihilation of dislocations. Such a scheme becomes unwieldy when considering the large numbers of dislocations involved in common crystal plasticity. In 1970, Kroner ("Initial Studies of a Plasticity Theory Based Upon Statistical Mechanics," Inelastic Behaviors of Solids (Materials Sciences and Engineering), M. F. Kanninen et al., eds., McGraw-Hill, New York, pp. 137-147), a pioneer in the continuum representation of dislocations, proposed a statistical method using n-point correlations to classify the dislocated state in a compact form. In addition to providing a convenient form, the correlations naturally identify dipoles, multipoles, and other higher order structures, such as cells, networks, and braids. As formulated, Kroner's method would require high-resolution microscopy techniques, which limits its utility for experimental measurements. The current work presents a modification to Kroner's method that would allow it to be used within the currently available resolution limits of bulk microscopy. Furthermore, in this work, newly developed microscopy techniques are employed to refine those resolution limits to more significant levels. The high-resolution bulk dislocation characterization is applied to a well-annealed nickel specimen and the results including visualizations of mesoscale structures are presented.
[1]
Wenge Yang,et al.
Experimental characterization of the mesoscale dislocation density tensor
,
2007
.
[2]
David T. Fullwood,et al.
Elastic properties closures using second-order homogenization theories: Case studies in composites of two isotropic constituents
,
2006
.
[3]
A. Wilkinson,et al.
High-resolution elastic strain measurement from electron backscatter diffraction patterns: new levels of sensitivity.
,
2006,
Ultramicroscopy.
[4]
Morton E. Gurtin,et al.
A gradient theory of small-deformation isotropic plasticity that accounts for the Burgers vector and for dissipation due to plastic spin
,
2004
.
[5]
Peter Gudmundson,et al.
A unified treatment of strain gradient plasticity
,
2004
.
[6]
Huajian Gao,et al.
A conventional theory of mechanism-based strain gradient plasticity
,
2004
.
[7]
E. Kröner.
Benefits and shortcomings of the continuous theory of dislocations
,
2001
.
[8]
Brent L. Adams,et al.
Mesoscale investigation of the deformation field of an aluminum bicrystal
,
1998
.
[9]
M. Ashby.
The deformation of plastically non-homogeneous materials
,
1970
.
[10]
J. Nye.
Some geometrical relations in dislocated crystals
,
1953
.
[11]
M. Polanyi,et al.
Über eine Art Gitterstörung, die einen Kristall plastisch machen könnte
,
1934
.
[12]
E. Orowan.
Zur Kristallplastizität. I
,
1934
.
[13]
G. Taylor.
The Mechanism of Plastic Deformation of Crystals. Part I. Theoretical
,
1934
.
[14]
Morton E. Gurtin,et al.
A gradient theory of single-crystal viscoplasticity that accounts for geometrically necessary dislocations
,
2002
.
[15]
E. Kröner,et al.
Kontinuumstheorie der Versetzungen und Eigenspannungen
,
1958
.