Development of new biocompatible 3D printed graphene oxide-based scaffolds.

[1]  Y. S. Zhang,et al.  Highly Porous Microcarriers for Minimally Invasive In Situ Skeletal Muscle Cell Delivery. , 2019, Small.

[2]  T. Vu,et al.  Soft-grain compression: Beyond the jamming point. , 2019, Physical review. E.

[3]  J. Barés,et al.  Deformation Field in Diametrically Loaded Soft Cylinders , 2019, Experimental Mechanics.

[4]  C. E. Corcione,et al.  Highly loaded hydroxyapatite microsphere/ PLA porous scaffolds obtained by fused deposition modelling , 2019, Ceramics International.

[5]  Shi-Bin Wang,et al.  Effect of Icariin on Engineered 3D-Printed Porous Scaffolds for Cartilage Repair , 2018, Materials.

[6]  Shi-Bin Wang,et al.  3D-Printing of Microfibrous Porous Scaffolds Based on Hybrid Approaches for Bone Tissue Engineering , 2018, Polymers.

[7]  A. Schroeder,et al.  Biocompatibility, biodegradation and excretion of polylactic acid (PLA) in medical implants and theranostic systems. , 2018, Chemical engineering journal.

[8]  Sylvain Catros,et al.  Characterization of printed PLA scaffolds for bone tissue engineering. , 2018, Journal of biomedical materials research. Part A.

[9]  D. Mahapatra,et al.  Graphene Oxide-A Tool for the Preparation of Chemically Crosslinking Free Alginate-Chitosan-Collagen Scaffolds for Bone Tissue Engineering. , 2018, ACS applied materials & interfaces.

[10]  Kai Zhu,et al.  Cardiac Tissue Engineering on the Nanoscale. , 2018, ACS biomaterials science & engineering.

[11]  Francesco Montagna,et al.  3D printing of hydroxyapatite polymer-based composites for bone tissue engineering , 2017 .

[12]  M. Novák,et al.  Designing of PLA scaffolds for bone tissue replacement fabricated by ordinary commercial 3D printer , 2017, Journal of biological engineering.

[13]  R. Young,et al.  Mechanical properties of graphene and graphene-based nanocomposites , 2017 .

[14]  I. Iatsunskyi,et al.  Design of Boron Nitride/Gelatin Electrospun Nanofibers for Bone Tissue Engineering. , 2017, ACS applied materials & interfaces.

[15]  A. Chiralt,et al.  Combination of Poly(lactic) Acid and Starch for Biodegradable Food Packaging , 2017, Materials.

[16]  P. Shiakolas,et al.  Poly-l-lactic Acid: Pellets to Fiber to Fused Filament Fabricated Scaffolds, and Scaffold Weight Loss Study , 2017 .

[17]  Yong Li,et al.  Measurements of the mechanical response of unidirectional 3D-printed PLA , 2017 .

[18]  L. Dai,et al.  Fabrication of polylactic acid/hydroxyapatite/graphene oxide composite and their thermal stability, hydrophobic and mechanical properties , 2017 .

[19]  Kai Zhu,et al.  Investigation of silk fibroin nanoparticle-decorated poly(l-lactic acid) composite scaffolds for osteoblast growth and differentiation , 2017, International journal of nanomedicine.

[20]  Joey Dacula Mangadlao,et al.  3D Printing Biocompatible Polyurethane/Poly(lactic acid)/Graphene Oxide Nanocomposites: Anisotropic Properties. , 2017, ACS applied materials & interfaces.

[21]  Arndt F Schilling,et al.  Polylactides in additive biomanufacturing. , 2016, Advanced drug delivery reviews.

[22]  M. D. Vlad,et al.  Design and properties of 3D scaffolds for bone tissue engineering. , 2016, Acta biomaterialia.

[23]  Gloria Gallego Ferrer,et al.  Macroporous poly(lactic acid) construct supporting the osteoinductive porous chitosan-based hydrogel for bone tissue engineering , 2016 .

[24]  F. Senatov,et al.  Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds. , 2016, Journal of the mechanical behavior of biomedical materials.

[25]  Richard O.C. Oreffo,et al.  Biofabrication of bone tissue: approaches, challenges and translation for bone regeneration. , 2016, Biomaterials.

[26]  W. Cong,et al.  Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling , 2015 .

[27]  Joshua M. Pearce,et al.  The effects of PLA color on material properties of 3-D printed components , 2015 .

[28]  M. Ribeiro,et al.  Studies on PLA grafting onto graphene oxide and its effect on the ensuing composite films , 2015 .

[29]  Derek H. Rosenzweig,et al.  3D-Printed ABS and PLA Scaffolds for Cartilage and Nucleus Pulposus Tissue Regeneration , 2015, International journal of molecular sciences.

[30]  Yongxiang Luo,et al.  Concentrated gelatin/alginate composites for fabrication of predesigned scaffolds with a favorable cell response by 3D plotting , 2015 .

[31]  Dong Kee Yi,et al.  Functionalization of Graphene Oxide and its Biomedical Applications , 2015 .

[32]  Christopher W. Macosko,et al.  Does Graphene Change Tg of Nanocomposites? , 2014 .

[33]  Ling Xu,et al.  Improved barrier properties of poly(lactic acid) with randomly dispersed graphene oxide nanosheets , 2014 .

[34]  Robert J. Strong,et al.  A review of melt extrusion additive manufacturing processes: I. Process design and modeling , 2014 .

[35]  Anthony Atala,et al.  3D bioprinting of tissues and organs , 2014, Nature Biotechnology.

[36]  So Hee Lee,et al.  Biodegradation of polylactic acid (PLA) fibers using different enzymes , 2014, Macromolecular Research.

[37]  A. Bandyopadhyay,et al.  Bone tissue engineering using 3D printing , 2013 .

[38]  Kalim Deshmukh,et al.  Surface properties of graphene oxide reinforced polyvinyl chloride nanocomposites , 2013, Journal of Polymer Research.

[39]  Josep A Planell,et al.  3D printed PLA-based scaffolds , 2013, Organogenesis.

[40]  Francisco M Gama,et al.  Biocompatibility of poly(lactic acid) with incorporated graphene-based materials. , 2013, Colloids and surfaces. B, Biointerfaces.

[41]  B. Hong,et al.  Biomedical applications of graphene and graphene oxide. , 2013, Accounts of chemical research.

[42]  J. Planell,et al.  High-resolution PLA-based composite scaffolds via 3-D printing technology. , 2013, Acta biomaterialia.

[43]  Amit Bandyopadhyay,et al.  Recent advances in bone tissue engineering scaffolds. , 2012, Trends in biotechnology.

[44]  A. Dasari,et al.  Chemical and thermal reduction of graphene oxide and its electrically conductive polylactic acid nanocomposites , 2012 .

[45]  Ali Khademhosseini,et al.  Microfabrication of complex porous tissue engineering scaffolds using 3D projection stereolithography. , 2012, Biomaterials.

[46]  Min Wang,et al.  PHBV/PLLA-based composite scaffolds fabricated using an emulsion freezing/freeze-drying technique for bone tissue engineering: surface modification and in vitro biological evaluation , 2012, Biofabrication.

[47]  Denis P. Dowling,et al.  Effect of Surface Wettability and Topography on the Adhesion of Osteosarcoma Cells on Plasma-modified Polystyrene , 2011, Journal of biomaterials applications.

[48]  F. O'Brien.  Biomaterials & scaffolds for tissue engineering , 2011 .

[49]  R. P. John,et al.  An overview of the recent developments in polylactide (PLA) research. , 2010, Bioresource technology.

[50]  R. Ruoff,et al.  Graphene and Graphene Oxide: Synthesis, Properties, and Applications , 2010, Advanced materials.

[51]  F. Melchels,et al.  A review on stereolithography and its applications in biomedical engineering. , 2010, Biomaterials.

[52]  C. Macosko,et al.  Graphene/Polymer Nanocomposites , 2010 .

[53]  W. Lu,et al.  Improved synthesis of graphene oxide. , 2010, ACS nano.

[54]  Liang Yang,et al.  Morphology, rheology and crystallization behavior of polylactide composites prepared through addition of five-armed star polylactide grafted multiwalled carbon nanotubes , 2010 .

[55]  G. Shi,et al.  Strong and ductile poly(vinyl alcohol)/graphene oxide composite films with a layered structure , 2009 .

[56]  SUPARNA DUTTASINHA,et al.  Graphene: Status and Prospects , 2009, Science.

[57]  J. Tascón,et al.  Preparation of graphene dispersions and graphene-polymer composites in organic media , 2009 .

[58]  L. Brinson,et al.  Functionalized graphene sheets for polymer nanocomposites. , 2008, Nature nanotechnology.

[59]  C. Chen,et al.  Preparation and Properties of Poly(lactide-co-glycolide) (PLGA)/ Nano-Hydroxyapatite (NHA) Scaffolds by Thermally Induced Phase Separation and Rabbit MSCs Culture on Scaffolds , 2008, Journal of biomaterials applications.

[60]  Yusuke Arima,et al.  Effect of wettability and surface functional groups on protein adsorption and cell adhesion using well-defined mixed self-assembled monolayers. , 2007, Biomaterials.

[61]  S. Stankovich,et al.  Graphene-based composite materials , 2006, Nature.

[62]  A. Boccaccini,et al.  Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering. , 2006, Biomaterials.

[63]  D. Kaplan,et al.  Porosity of 3D biomaterial scaffolds and osteogenesis. , 2005, Biomaterials.

[64]  Colleen L Flanagan,et al.  Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. , 2005, Biomaterials.

[65]  N. Mohri,et al.  Dynamic mechanical properties of solution-cast poly(l-lactide) films , 2002 .

[66]  Jui-Hsiang Chen,et al.  Fabrication of porous biodegradable polymer scaffolds using a solvent merging/particulate leaching method. , 2002, Journal of biomedical materials research.

[67]  I. Zein,et al.  Fused deposition modeling of novel scaffold architectures for tissue engineering applications. , 2002, Biomaterials.

[68]  P. Tresco,et al.  Relative importance of surface wettability and charged functional groups on NIH 3T3 fibroblast attachment, spreading, and cytoskeletal organization. , 1998, Journal of biomedical materials research.

[69]  H. Aro,et al.  Clinical use of bone allografts. , 1993, Annals of medicine.

[70]  G. Wegner,et al.  Investigation of the structure of solution grown crystals of lactide copolymers by means of chemical reactions , 1973 .

[71]  L. Turng,et al.  The surface grafting of graphene oxide with poly(ethylene glycol) as a reinforcement for poly(lactic acid) nanocomposite scaffolds for potential tissue engineering applications. , 2016, Journal of the mechanical behavior of biomedical materials.

[72]  Wei Gao,et al.  The Chemistry of Graphene Oxide , 2015 .

[73]  Fernão D. Magalhães,et al.  Effect of incorporation of graphene oxide and graphene nanoplatelets on mechanical and gas permeability properties of poly(lactic acid) films , 2013 .

[74]  Rubens Maciel Filho,et al.  Poly-lactic acid synthesis for application in biomedical devices - a review. , 2012, Biotechnology advances.

[75]  R. Bos,et al.  Degradation of and tissue reaction to biodegradable poly(L-lactide) for use as internal fixation of fractures: a study in rats. , 1991, Biomaterials.

[76]  D E Cutright,et al.  Tissue reaction to the biodegradable polylactic acid suture. , 1971, Oral surgery, oral medicine, and oral pathology.