Microstructure and nanoindentation investigation of magnetron sputtering Ag/Co multilayers

Abstract The microstructure, hardness and elastic modulus of Ag/Co multilayers prepared by direct current magnetron sputtering were investigated by X-ray diffraction, transmission electron microscopy, and nanoindentation. The results show that all the multilayers have well compositionally modulation structure. A peak hardness of 4.9 GPa is obtained for periodicity of 7 nm, which is about 23% larger than the rule-of-mixture value, and it can be interpreted by elastic modulus mismatch between Ag and Co. For the multilayers with lower modulation period, Co layer grow into FCC structure together with Ag layer which would lead to hardness decrease. For the multilayers with periodicity large than 7 nm, the hardness decreases with increasing periodicity not obeying Hall–Petch relationship. The elastic modulus decreases with decreasing modulation period due to the compliant interface.

[1]  Guang Yang,et al.  The Effects of Layer Thickness on the Microstructure and Magnetic Properties of Evaporated Co/Ag Films , 2002 .

[2]  D. Kwon,et al.  Analysis of interfacial strengthening from composite hardness of TiN/VN and TiN/NbN multilayer hard coatings , 2004 .

[3]  William D. Nix,et al.  Effects of the substrate on the determination of thin film mechanical properties by nanoindentation , 2002 .

[4]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[5]  S. Barnett,et al.  Model of superlattice yield stress and hardness enhancements , 1995 .

[6]  Lee,et al.  Perpendicular giant magnetoresistances of Ag/Co multilayers. , 1991, Physical review letters.

[7]  L. Hultman,et al.  Structure and mechanical properties of epitaxial TiN/V_0.3Nb_0.7N(100) superlattices , 1994 .

[8]  A. Jankowski.  Superhardness effect in Au/Ni multilayers , 1993 .

[9]  Wu Liang,et al.  Growth, microstructure, and microhardness of W/Mo nanostructured multilayers , 2001 .

[10]  B. Carnahan,et al.  Image forces on screw dislocations in multilayer structures , 1987 .

[11]  B. J. Daniels,et al.  Enhanced mechanical hardness in compositionally modulated Fe(001)/Pt(001) and Fe(001)/Cr(001) epitaxial thin films , 1994 .

[12]  B. J. Daniels,et al.  Effect of Structure, Stress, Strain, and Alloying on the Hardness of Fe(001)/Pt(001) Epitaxial Multilayers , 1994 .

[13]  J. Koehler.  Attempt to Design a Strong Solid , 1970 .

[14]  P. Anderson,et al.  Hall-Petch relations for multilayered materials , 1995 .

[15]  S. Qadri,et al.  Low-dimension structural properties and microindentation studies of ion-beam-sputtered multilayers of Ag/Al films , 1994 .

[16]  Amit Misra,et al.  Structure and mechanical properties of Cu-X (X = Nb,Cr,Ni) nanolayered composites , 1998 .

[17]  S. Lehoczky.  Retardation of Dislocation Generation and Motion in Thin-Layered Metal Laminates , 1978 .

[18]  S. Araki.  Magnetism and transport properties of evaporated Co/Ag multilayers , 1993 .

[19]  F. Pan,et al.  Microstructure and nanoindentation hardness of Ti/TiN multilayered films , 2001 .

[20]  L. Hultman,et al.  Growth, structure, and microhardness of epitaxial TiN/NbN superlattices , 1992 .

[21]  Kiyoshi Yokogawa,et al.  Surface oxidation of a Nb(100) single crystal by scanning tunneling microscopy , 2002 .

[22]  Dynamic approach for finding effective elastic and piezoelectric constants of superlattices , 1990 .

[23]  Holm Geisler,et al.  Hardness enhancement and elastic modulus behaviour in sputtered Ag/Ni multilayers with different modulation wavelengths , 1999 .

[24]  S. Barnett,et al.  Growth of single-crystal TiN/VN strained-layer superlattices with extremely high mechanical hardness , 1987 .

[25]  S. Lehoczky,et al.  Strength enhancement in thin‐layered Al‐Cu laminates , 1978 .

[26]  T. Tsakalakos.  Modulated structure materials , 1984 .

[27]  F. Pan,et al.  Investigation of nanoindentation on Co/Mo multilayers by the continuous stiffness measurement technique , 2005 .

[28]  B. J. Daniels,et al.  Effect of coherency stresses on the hardness of epitaxial Fe(001)/Pt(001) multilayers , 1995 .

[29]  S. I. Rao,et al.  Atomistic simulations of dislocation–interface interactions in the Cu-Ni multilayer system , 2000 .

[30]  B. Bhushan,et al.  A Review of Nanoindentation Continuous Stiffness Measurement Technique and Its Applications , 2002 .