Fires in storages of LFO: Analysis of hazard of structural collapse of steel-aluminium containers.

Pool fires of light fuel oil (LFO) in above-ground storages with steel-aluminium containers are discussed. A model is developed for assessments of risks of between-tank fire spread. Radiative effects of the flame body are accounted for by a solid flame radiation model. Thermal profiles evolved due to fire in the adjacent tanks and their consequential structural response is pursued in an exact (materially and geometrically non-linear) manner. The model's derivation is demonstrated on the LFO tank storage located near the Port of Koper (Slovenia). In support of the model, data from literature are adopted where appropriate. Analytical expressions are derived correspondingly for calculations of emissive characteristics of LFO pool fires. Additional data are collected from experiments. Fire experiments conducted on 300cm diameter LFO pans and at different wind speeds and high-temperature uniaxial tension tests of the analysed aluminium alloys types 3xxx and 6xxx are presented. The model is of an immediate fire engineering practical value (risk analyses) or can be used for further research purposes (e.g. sensitivity and parametric studies). The latter use is demonstrated in the final part of the paper discussing possible effects of high-temperature creep of 3xxx aluminium.

[1]  Bret W. Butler,et al.  Firefighter Safety Zones: A Theoretical Model Based on Radiative Heating , 1998 .

[2]  Tomaž Hozjan,et al.  The fire analysis of a steel–concrete side-plated beam , 2013 .

[3]  J. Moorhouse.  Scaling criteria for pool fires derived from large scale experiments. , 1982 .

[4]  Daniel A. Crowl,et al.  Chemical Process Safety: Fundamentals with Applications , 2001 .

[5]  Asif Usmani,et al.  Composite steel-framed structures in fire with protected and unprotected edge beams , 2007 .

[6]  Brian Y. Lattimer,et al.  Finite element modelling of tensile deformation and failure of aluminium plate exposed to fire , 2014 .

[7]  J Johan Maljaars,et al.  Local buckling of fire-exposed aluminum members: New design model , 2010 .

[8]  G. Mulholland,et al.  The effect of diameter on the burning of crude oil pool fires , 1991 .

[9]  Venkatesh Kodur,et al.  A performance based methodology for fire design of restrained steel beams , 2011 .

[10]  Brian Y. Lattimer,et al.  Structural Analysis of Compression Deformation and Failure of Aluminum in Fire , 2011 .

[11]  Venkatesh Kodur,et al.  Effect of high temperature creep on the fire response of restrained steel beams , 2010 .

[12]  J. Kolšek,et al.  Pool fire accident in an aboveground LFO tank storage: thermal analysis , 2014 .

[13]  Brian Y. Lattimer,et al.  Compression load failure of aluminum plates due to fire , 2012 .

[14]  Pentti Mäkeläinen,et al.  Mechanical properties of structural steel at elevated temperatures and after cooling down , 2004 .

[15]  J Johan Maljaars,et al.  Constitutive Model for Aluminum Alloys Exposed to Fire Conditions , 2008 .

[16]  Tim T. Fu,et al.  Heat radiation from fires of aviation fuels , 1974 .

[17]  C. Beyler.  Fire Hazard Calculations for Large, Open Hydrocarbon Fires , 2016 .

[18]  Josep Arnaldos,et al.  Establishing safety distances for wildland fires , 2008 .

[19]  E. Planas,et al.  Predicting the emissive power of hydrocarbon pool fires. , 2007, Journal of hazardous materials.

[20]  Jean-Louis Consalvi,et al.  Monte Carlo estimation of thermal radiation from wildland fires , 2011 .

[21]  Brian Y. Lattimer,et al.  Creep-based life prediction modelling of aluminium in fire , 2010 .

[22]  T. Sheppard.  Extrusion of Aluminium Alloys , 1999 .

[23]  Tomaž Hozjan,et al.  A fully generalised approach to modelling fire response of steel–RC composite structures , 2014 .

[24]  Qiyuan Xie,et al.  Experimental study on flowing burning behaviors of a pool fire with dripping of melted thermoplastics. , 2014, Journal of hazardous materials.

[25]  Noah L Ryder,et al.  Consequence modeling using the fire dynamics simulator. , 2004, Journal of hazardous materials.

[26]  T. Z. Harmathy.  A Comprehensive Creep Model , 1967 .

[27]  Jose L. Torero,et al.  SFPE handbook of fire protection engineering , 2016 .

[28]  Simo Hostikka,et al.  Generalized direct method for pyrolysis kinetic parameter estimation and comparison to existing methods , 2012 .

[29]  Indra Mani Mishra,et al.  Engineering layout of fuel tanks in a tank farm , 2011 .

[30]  Zhaohui Huang,et al.  Progressive collapse analysis of steel structures under fire conditions , 2012 .

[31]  Joaquim Casal,et al.  Experimental study of thin-layer boilover in large-scale pool fires. , 2006, Journal of hazardous materials.

[32]  J Johan Maljaars,et al.  Local buckling of aluminium structures exposed to fire. Part 2: Finite element models , 2009 .

[33]  Josep Arnaldos,et al.  Thin-layer boilover in diesel-oil fires: Determining the increase of thermal hazards and safety distances. , 2007, Journal of hazardous materials.

[34]  R. C. Corlett,et al.  Some aspects of structures of turbulent pool fires , 1979 .

[35]  J. Floyd,et al.  Computational fluid dynamics modelling of fire , 2012 .

[36]  J Johan Maljaars,et al.  Flexural buckling of fire exposed aluminium columns , 2009 .

[37]  D. Burgess,et al.  Diffusive burning of liquid fuels in open trays , 1961 .

[38]  Roger J. Plank,et al.  Thermal and structural behaviour of a full-scale composite building subject to a severe compartment fire , 2007 .

[39]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .