Initial dislocation structures in 3-D discrete dislocation dynamics and their influence on microscale plasticity

Abstract Realistic dislocation network topologies were generated by relaxing an initially pinning point free dislocation loop structure using three-dimensional discrete dislocation dynamics simulations. Traction-free finite-sized samples were used. Subsequently, these equilibrated structures were subjected to tensile loading and their mechanical behavior was investigated with respect to the initial configuration. A strong mechanical size effect was found. The flow stress at 0.2% plastic deformation scales with specimen size with an exponent between −0.6 and −0.9, depending on the initial structure and size regime. During relaxation, a mechanism, also favored by cross-slip, is identified which leads to rather stable pinning points. These pinning points are comparable to those of the isolated Frank–Read sources often used as a starting configuration in previous discrete dislocation dynamics simulations. These nodes act as quite stable dislocation sources, which can be activated multiple times. The influence of this source mechanism on the mechanical properties of small-scale specimens is discussed.

[1]  C. A. Volkert,et al.  Size effects in the deformation of sub-micron Au columns , 2006 .

[2]  Reinhard Pippan,et al.  Mechanical properties of micro-sized copper bending beams machined by the focused ion beam technique , 2005 .

[3]  C. Motz,et al.  Dislocation-induced crystal rotations in micro-compressed single crystal copper columns , 2008 .

[4]  Jens Lothe John Price Hirth,et al.  Theory of Dislocations , 1968 .

[5]  Reinhard Pippan,et al.  A further step towards an understanding of size-dependent crystal plasticity: In situ tension experiments of miniaturized single-crystal copper samples , 2008 .

[6]  M. Jenko,et al.  FIB damage of Cu and possible consequences for miniaturized mechanical tests , 2007 .

[7]  D. Gall,et al.  High‐Temperature Tribological Behavior of CrN‐Ag Self‐lubricating Coatings , 2006 .

[8]  Julia R. Greer,et al.  Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients , 2005 .

[9]  van der Erik Giessen,et al.  Aspects of boundary-value problem solutions with three-dimensional dislocation dynamics , 2002 .

[10]  Vasily V. Bulatov,et al.  Computer Simulations of Dislocations (Oxford Series on Materials Modelling) , 2006 .

[11]  Oliver Kraft,et al.  Discrete dislocation simulations of the plasticity of micro-pillars under uniaxial loading , 2008 .

[12]  H. Espinosa,et al.  Dislocation-source shutdown and the plastic behavior of single-crystal micropillars. , 2008, Physical review letters.

[13]  E. Arzt.  Size effects in materials due to microstructural and dimensional constraints: a comparative review , 1998 .

[14]  J. Greer,et al.  Nanoscale gold pillars strengthened through dislocation starvation , 2006 .

[15]  J. Hirth,et al.  Theory of Dislocations (2nd ed.) , 1983 .

[16]  Peter Gumbsch,et al.  Micro-bending tests: A comparison between three-dimensional discrete dislocation dynamics simulations and experiments , 2008 .

[17]  Oliver Kraft,et al.  Three-dimensional dislocation dynamics simulation of the influence of sample size on the stress–strain behavior of fcc single-crystalline pillars , 2008 .

[18]  Peter Gumbsch,et al.  Study of dislocation reactions and rearrangements under different loading conditions , 2005 .

[19]  A. Ngan,et al.  Stochastic nature of plasticity of aluminum micro-pillars , 2008 .

[20]  Meijie Tang,et al.  Athermal mechanisms of size-dependent crystal flow gleaned from three-dimensional discrete dislocation simulations , 2008 .

[21]  A. Needleman,et al.  Plasticity size effects in tension and compression of single crystals , 2005 .

[22]  Michael D. Uchic,et al.  Contribution to size effect of yield strength from the stochastics of dislocation source lengths in finite samples , 2007 .

[23]  Athanasios Arsenlis,et al.  Enabling strain hardening simulations with dislocation dynamics , 2006 .

[24]  J. Greer,et al.  Fundamental differences in mechanical behavior between two types of crystals at the nanoscale. , 2008, Physical review letters.

[25]  Horacio Dante Espinosa,et al.  Plasticity size effects in free-standing submicron polycrystalline FCC films subjected to pure tension , 2004 .

[26]  Peter Gumbsch,et al.  Discrete dislocation simulation of plastic deformation in metal thin films , 2004 .

[27]  H. Espinosa,et al.  Dislocation escape-related size effects in single-crystal micropillars under uniaxial compression , 2007 .

[28]  E. Giessen,et al.  Bending of a single crystal: discrete dislocation and nonlocal crystal plasticity simulations , 2004 .

[29]  S. Zapperi,et al.  Dislocation Avalanches, Strain Bursts, and the Problem of Plastic Forming at the Micrometer Scale , 2007, Science.

[30]  D. Dimiduk,et al.  Sample Dimensions Influence Strength and Crystal Plasticity , 2004, Science.

[31]  H. Espinosa,et al.  An interpretation of size-scale plasticity in geometrically confined systems. , 2005, Proceedings of the National Academy of Sciences of the United States of America.

[32]  Benoit Devincre,et al.  Simulations of forest interactions and strain hardening in FCC crystals , 1994 .

[33]  Julia R. Greer,et al.  Deformation at the nanometer and micrometer length scales: Effects of strain gradients and dislocation starvation , 2007 .