Environmental aging of poly(p-phenylenevinylene) based light-emitting diodes

Abstract We report the effect of environmental aging of poly( p -phenylenevinylene) (PPV) on the efficiency of light-emitting diodes (LEDs) with calcium and aluminium cathodes. We prepared both single- and double-layer structures with an electron-transporting/hole-blocking layer of 2-(4-biphenylyl)-5-butylphenyl-1,3,4-oxadiazole (PBD) blended with poly(methyl metacrylate), inserted between the PPV and the calcium cathode. PPV was prepared via the precursor route and aged prior to the cathode deposition by exposing it to nitrogen (in a glove box) or air, and either in the dark, or in visible daylight. We have found that the reduction of electroluminescence (EL) efficiency after illumination in air is large for the single-layer devices, but much smaller, and comparable to the reduction of the photoluminescence (PL) efficiency, for the double-layer diodes. Surprisingly, aging in air, in the dark, does not alter significantly the efficiency of the Ca devices, whereas it increases that of Al/PPV/ITO by almost an order of magnitude. We interpret the influence of the different aging conditions in terms of a combination of photooxidation and doping of PPV by oxygen and water vapor.

[1]  J. J. M. Vleggaar,et al.  Electron and hole transport in poly(p‐phenylene vinylene) devices , 1996 .

[2]  H. Antoniadis,et al.  Carrier deep-trapping mobility-lifetime products in poly(p-phenylene vinylene) , 1994 .

[3]  Henrique L. Gomes,et al.  Effect of oxygen on the electrical characteristics of field effect transistors formed from electrochemically deposited films of poly(3-methylthiophene) , 1991 .

[4]  Dago M. de Leeuw,et al.  Field-effect transistors made from solution-processed organic semiconductors , 1997 .

[5]  R. Friend,et al.  Luminescence properties of poly(p-phenylenevinylene): Role of the conversion temperature on the photoluminescence and electroluminescence efficiencies , 1999 .

[6]  Donal D. C. Bradley,et al.  Angular Dependence of the Emission from a Conjugated Polymer Light‐Emitting Diode: Implications for efficiency calculations , 1994 .

[7]  W. R. Salaneck,et al.  The interaction of poly (p-phenylenevinylene) with air† , 1996 .

[8]  Harrison,et al.  Singlet Intrachain Exciton Generation and Decay in Poly (p-phenylenevinylene). , 1996, Physical review letters.

[9]  Klavs F. Jensen,et al.  Photo-oxidation of polymers used in electroluminescent devices , 1995 .

[10]  D. Bradley.  Precursor-route poly(p-phenylenevinylene): polymer characterisation and control of electronic properties , 1987 .

[11]  R. Haddon,et al.  Intrinsic and extrinsic constraints on phenylenevinylene polymer electroluminescence , 1996 .

[12]  D. Neher,et al.  Direct determination of the emission zone in a polymer light‐emitting diode , 1997 .

[13]  W. R. Salaneck,et al.  Chemical interactions at polymer interfaces: poly(p-xylylene-α-tetrahydrothiophene-bromide, chloride) on indium–tin-oxide , 1999 .

[14]  Taehyoung Zyung,et al.  Photodegradation of poly(p ‐ phenylenevinylene) by laser light at the peak wavelength of electroluminescence , 1995 .

[15]  W. R. Salaneck,et al.  The metal‐on‐polymer interface in polymer light emitting diodes , 1996 .

[16]  M. Kakimoto,et al.  Heterostructural Electroluminescent Devices Based on Poly (P-Phenylenevinylene) and Polyimide LB Films , 1995 .

[17]  James R. Sheats,et al.  Singlet Oxygen as a Reactive Intermediate in the Photodegradation of an Electroluminescent Polymer , 1995 .

[18]  Miller,et al.  Defect quenching of conjugated polymer luminescence. , 1994, Physical review letters.

[19]  E. Smela,et al.  Sensitivity of Polythiophene Planar Light‐Emitting Diodes to Oxygen , 1998 .

[20]  Markus Schwoerer,et al.  Poly(p-phenylene vinylene) light-emitting devices prepared via the precursor route onto indium tin oxide and fluorine-doped tin dioxide substrates , 1997 .

[21]  Franco Cacialli,et al.  Light-emitting diodes based on poly(methacrylates) with distyrylbenzene and oxadiazole side chains , 1995 .

[22]  Donal D. C. Bradley,et al.  Poly(p-phenylenevinylene) light-emitting diodes : enhanced electroluminescent efficiency through charge carrier confinement , 1992 .

[23]  B. Cumpston,et al.  In situ characterization of the oxidative degradation of a polymeric light emitting device , 1997 .

[24]  Richard H. Friend,et al.  Interference effects in anisotropic optoelectronic devices , 2000 .

[25]  Richard H. Friend,et al.  An improved experimental determination of external photoluminescence quantum efficiency , 1997 .

[26]  William R. Salaneck,et al.  Conjugated polymer surfaces and interfaces , 1997, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[27]  Markus Schwoerer,et al.  Control of impurities in PPV light-emitting devices , 1997 .

[28]  Shuai,et al.  Singlet and triplet exciton formation rates in conjugated polymer light-emitting diodes , 2000, Physical review letters.

[29]  A. Heeger,et al.  Light‐emitting diodes from partially conjugated poly(p‐phenylene vinylene) , 1993 .

[30]  Donal D. C. Bradley,et al.  Space-charge limited conduction with traps in poly(phenylene vinylene) light emitting diodes , 1997 .

[31]  R. Friend,et al.  Interference effects in conjugated polymer devices , 1999 .

[32]  Franco Cacialli,et al.  Efficient green light‐emitting diodes from a phenylated derivative of poly(p‐phenylene–vinylene) , 1996 .

[33]  Jean-Luc Brédas,et al.  Influence of donor and acceptor substituents on the electronic characteristics of poly(paraphenylene vinylene) and poly(paraphenylene) , 1994 .

[34]  Howard W. H. Lee,et al.  Photo‐oxidation of electroluminescent polymers studied by core‐level photoabsorption spectroscopy , 1996 .