论文信息 - Optical fiber Fabry-Perot interferometric sensor for magnetic field measurement

Optical fiber Fabry-Perot interferometric sensor for magnetic field measurement

A fiber-optic sensor based on the extrinsic Fabry-Perot interferometer (EFPI) is demonstrated to measure dc magnetic fields (100-35000 nT). A Metglas (Fe/sub 77.5/B/sub 15/Si/sub 7.5/) wire-based magnetostrictive transducer is used as the reflector in two quadrature-phase-shifted EFPI sensor elements which are used to overcome phase ambiguity in the interferometric sensor. The simple sensor geometry gives both relatively low-vibration sensitivity and better than 99% compensation for thermally induced fluctuations.

A. Wang | R.O. Claus | Ki Dong Oh | J. Ranade | V. Arya

[1] S. Thordarson,et al. Closed-Loop Fiber-Optic Magnetometer/Gradiometer , 1988, Other Conferences.

[2] R O Claus,et al. Quadrature phase-shifted, extrinsic Fabry-Perot optical fiber sensors. , 1991, Optics letters.

[3] Gordon W. Day,et al. Faraday Effect Sensors: The State Of The Art , 1989, Other Conferences.

[4] Kent A. Murphy,et al. Extrinsic Fabry-Perot sensor for strain and crack opening displacement measurements from -200 to 900 degrees C , 1992 .

[5] Christopher C. Davis,et al. Magnetic field detection enhancement in an external cavity fiber Fabry-Perot sensor , 1996 .

[6] Frank Bucholtz,et al. Elimination of residual signals and reduction of noise in a low‐frequency magnetic fiber sensor , 1988 .