A new single phase hybrid passive filter to dampen resonances and compensate harmonics and reactive power under distorted source conditions

This paper proposes a new single phase hybrid passive filter (SPHPF) for compensating load voltage and current harmonics, correct power factor, eliminate the chances of series and parallel resonance and eliminates large variation of power factor and terminal voltage with varying loads under stiff and distorted source conditions. The harmonics analysis is performed in order to observe the percentage reduction of total harmonic distortion for passive filter at various loads. The investigations are carried out to validate the performance of proposed SPHPF with detuned resonance, for effective and efficient operation under varying loads and source conditions. The topology of SPHPF is chosen to shift the resonance frequency of the resulting system below 80 Hz where no excitation is expected. The frequency response shows excellent damping characteristic for load harmonic current above 80 Hz, which indicates that the hybrid passive filtering performance of this topology is satisfactory. Experimental and simulation results show that the proposed passive filter can simultaneously compensate effectively all voltage and current harmonics and reactive power for large capacity nonlinear load.

[1]  S. Y. Chu,et al.  Strategic placement and sizing of passive filters in a power system for controlling voltage distortion , 2004 .

[2]  Kun-Ping Lin,et al.  An advanced computer code for single-tuned harmonic filter design , 1997, 1997 IEEE Industrial and Commercial Power Systems Technical Conference. Conference Record.

[3]  V. Garg,et al.  Passive Hybrid Filter for Varying Rectifier Loads , 2005, 2005 International Conference on Power Electronics and Drives Systems.

[4]  J.C. Das,et al.  Passive filters - potentialities and limitations , 2003, IEEE Transactions on Industry Applications.

[5]  G. Joos,et al.  Analysis and comparison of passive & active harmonic suppression filters in distribution systems , 2000, 2000 Canadian Conference on Electrical and Computer Engineering. Conference Proceedings. Navigating to a New Era (Cat. No.00TH8492).

[6]  Christopher R. Houck,et al.  On the use of non-stationary penalty functions to solve nonlinear constrained optimization problems with GA's , 1994, Proceedings of the First IEEE Conference on Evolutionary Computation. IEEE World Congress on Computational Intelligence.

[7]  H. Akagi,et al.  A practical approach to harmonic compensation in power systems-series connection of passive and active filters , 1990, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting.

[8]  K. Al-Haddad,et al.  A series hybrid power filter to compensate harmonic currents and voltages , 2002, IEEE 2002 28th Annual Conference of the Industrial Electronics Society. IECON 02.

[9]  Jin-Cheng Wang,et al.  Strategic planning of LC compensators in nonsinusoidal distribution systems , 1994 .

[10]  Gui-Jia Su,et al.  A series LC filter for harmonic compensation of AC drives , 1999, 30th Annual IEEE Power Electronics Specialists Conference. Record. (Cat. No.99CH36321).

[11]  Fang Zheng Peng,et al.  Harmonic sources and filtering approaches-series/parallel, active/passive, and their combined power filters , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[12]  L. Morgan,et al.  Harmonic filter design using actual recorded data , 1992, [Proceedings] 1992 Rural Electric Power Conference. Papers presented at the 36th Annual Conference.

[13]  J. K. Phipps A transfer function approach to harmonic filter design , 1995, Industry Applications Society 42nd Annual Petroleum and Chemical Industry Conference.

[14]  Ned Mohan,et al.  Hybrid-active filtering of harmonic currents in power systems , 1995 .

[15]  M. F. McGranaghan,et al.  Designing harmonic filters for adjustable speed drives to comply with IEEE-519 harmonic limits , 1997, 1997 Rural Electric Power Conference (Cat. No.97CH36079).