论文信息 - Installation Progress at the PIP-II Injector Test at Fermilab

Installation Progress at the PIP-II Injector Test at Fermilab

A CW-compatible, pulsed H- superconducting linac “PIP-II” is being planned to upgrade Fermilab's injection complex. To validate the front-end concept, a test acceler-ator (The PIP-II Injector Test, formerly known as "PXIE") is under construction. The warm part of this accelerator comprises a 10 mA DC, 30 keV H- ion source, a 2 m-long Low Energy Beam Transport (LEBT), a 2.1 MeV Radio Frequency Quadrupole (RFQ) capable of operation in Con-tinuous Wave (CW) mode, and a 10 m-long Medium En-ergy Beam Transport (MEBT). The paper will report on the installation of the RFQ and the first sections of the MEBT and related mechanical design considerations.

[1] S. G. Biedron,et al. Resonant Control for Fermilab's PXIE RFQ , 2016 .

[2] S. G. Biedron,et al. Resonant Frequency Control For the PIP-II Injector Test RFQ: Control Framework and Initial Results , 2016 .

[3] V. Scarpine,et al. Status of the Warm Front End of PXIE , 2015, 1502.01703.

[4] David B. Holtkamp,et al. An Emittance Scanner for Intense Low-Energy Ion Beams , 1983, IEEE Transactions on Nuclear Science.

[5] Stephen Holmes,et al. PIP-II Status and Strategy , 2015 .

[6] John Staples,et al. Beam Commissioning Status and Results of the FNAL PIP2IT Linear Accelerator RFQ , 2017 .

[7] S. Konecni,et al. Thermal and structural analysis of a beam stop , 2001, PACS2001. Proceedings of the 2001 Particle Accelerator Conference (Cat. No.01CH37268).

[8] B. E. Chase,et al. Neural Network Model Of The PXIE RFQ Cooling System and Resonant Frequency Response , 2016, 1612.07237.