Reel-to-reel wet coating as an efficient up-scaling technique for the production of bulk-heterojunction polymer solar cells

Abstract In this paper we report for the first time very promising results in up-scaling coating processes for thin flexible polymer solar cell (PSC) application. Two functional layers for PSC devices, the conducting poly- (3,4-ethylene-dioxythiophene):polystyrenesulfonate and the photoactive one (poly-3-hexylthiophene/[6,6]-phenyl-C61-butyric acid methyl ester), could be successfully prepared by continuous reel-to-reel (R2R) wet coating of low-viscosity solutions and dispersions on ITO-coated PET substrates. A laboratory coating machine (LBA-200) was used for R2R slot die coating (1–4 m/min). Out of this R2R-produced bilayer-system PSCs were accomplished and tested. Light power conversion efficiencies up to 1.7% under AM 1.5 illumination (100 mW/cm 2 ) could be obtained.

[1]  Oliver Ambacher,et al.  Effects of solvent and annealing on the improved performance of solar cells based on poly(3-hexylthiophene): Fullerene , 2005 .

[2]  F. Krebs,et al.  Stability/degradation of polymer solar cells , 2008 .

[3]  B. Kippelen Organic Photovoltaics , 2007, 2007 Conference on Lasers and Electro-Optics (CLEO).

[4]  Frederik C. Krebs,et al.  Out-door testing and long-term stability of plastic solar cells , 2006 .

[5]  A J Heeger,et al.  Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols. , 2007, Nature materials.

[6]  Arthur A. Tracton Coatings Technology Handbook , 2005 .

[7]  Xiong Gong,et al.  Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology , 2005 .

[8]  N. S. Sariciftci,et al.  Flexible, conjugated polymer-fullerene-based bulk-heterojunction solar cells: Basics, encapsulation, and integration , 2005 .

[9]  Christoph J. Brabec,et al.  Performance Analysis of Printed Bulk Heterojunction Solar Cells , 2006 .

[10]  René A. J. Janssen,et al.  Polymer-Fullerene Bulk Heterojunction Solar Cells , 2005 .

[11]  Frederik C. Krebs,et al.  Significant Improvement of Polymer Solar Cell Stability , 2005 .

[12]  N. E. Coates,et al.  Efficient Tandem Polymer Solar Cells Fabricated by All-Solution Processing , 2007, Science.

[13]  C. Brabec,et al.  Conjugated Polymer‐Based Plastic Solar Cells , 2005 .

[14]  Frederik C. Krebs,et al.  Polymer photovoltaics: A practical approach , 2008 .

[15]  N. S. Sariciftci,et al.  Conjugated polymer-based organic solar cells. , 2007, Chemical reviews.

[16]  P. Schweizer,et al.  Liquid film coating : scientific principles and their technological implications , 1997 .

[17]  Claudia N. Hoth,et al.  High Photovoltaic Performance of Inkjet Printed Polymer:Fullerene Blends , 2007 .

[18]  Christoph J. Brabec,et al.  Production Aspects of Organic Photovoltaics and Their Impact on the Commercialization of Devices , 2005 .

[19]  Christoph J. Brabec,et al.  Solution-Processed Organic Solar Cells , 2008 .

[20]  Christoph J. Brabec,et al.  Design Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency , 2006 .

[21]  F. Krebs,et al.  Low band gap polymers for organic photovoltaics , 2007 .

[22]  Gerhard Gobsch,et al.  Flexible large area polymer solar cells based on poly(3-hexylthiophene)/fullerene , 2004 .

[23]  Niyazi Serdar Sariciftci,et al.  Morphology of polymer/fullerene bulk heterojunction solar cells , 2006 .

[24]  C. A. Walsh,et al.  Efficient photodiodes from interpenetrating polymer networks , 1995, Nature.

[25]  J. Poortmans Organic solar cells: linking nanoscale to gigawatts? , 2007 .

[26]  Sam-Shajing Sun,et al.  Organic Photovoltaics : Mechanisms, Materials, and Devices , 2005 .

[27]  David Braun,et al.  Semiconducting polymer‐buckminsterfullerene heterojunctions: Diodes, photodiodes, and photovoltaic cells , 1993 .

[28]  F. Krebs Fabrication and processing of polymer solar cells: A review of printing and coating techniques , 2009 .

[29]  R. Friend,et al.  Surface conditioning of indium-tin oxide anodes for organic light-emitting diodes , 2003 .

[30]  U. Zhokhavets,et al.  The influence of the optoelectronic properties of poly(3-alkylthiophenes) on the device parameters in flexible polymer solar cells , 2005 .

[31]  F. Apsel Funktionalisierung von Oberflächen mittels Beschichtung aus dem fluiden Zustand , 2001 .

[32]  Frederik C. Krebs,et al.  Large area plastic solar cell modules , 2007 .

[33]  Xiaoniu Yang,et al.  Nanoscale morphology of high-performance polymer solar cells. , 2005, Nano letters.

[34]  Christoph J. Brabec,et al.  Flexible organic P3HT:PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime , 2008 .

[35]  S. Jenekhe,et al.  Efficient photovoltaic cells from semiconducting polymer heterojunctions , 2000 .

[36]  Donal D. C. Bradley,et al.  A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells , 2006 .

[37]  J. Hummelen,et al.  Polymer Photovoltaic Cells: Enhanced Efficiencies via a Network of Internal Donor-Acceptor Heterojunctions , 1995, Science.

[38]  Garry Rumbles,et al.  Performance of bulk heterojunction photovoltaic devices prepared by airbrush spray deposition , 2008 .

[39]  U. Zhokhavets,et al.  Phenylene-ethynylene/phenylene-vinylene hybrid polymers: optical and electrochemical characterization, comparison with poly[2-methoxy-5-(3′,7′-dimethyloctyloxy)-1,4-phenylene vinylene] and application in flexible polymer solar cells , 2005 .

[40]  Yang Yang,et al.  High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends , 2005 .

[41]  J. Fréchet,et al.  Polymer-fullerene composite solar cells. , 2008, Angewandte Chemie.

[42]  L. Pranevičius Vapor Deposition Coating Technologies , 2005 .

[43]  S. Sensfuss,et al.  Efficient large-area polymer solar cells on flexible substrates , 2004 .

[44]  F. Krebs,et al.  Bulk Heterojunctions Based on Native Polythiophene , 2008 .

[45]  Frederik C. Krebs,et al.  Production of large-area polymer solar cells by industrial silk screen printing, lifetime considerations and lamination with polyethyleneterephthalate , 2004 .

[46]  Niyazi Serdar Sariciftci,et al.  Effects of Postproduction Treatment on Plastic Solar Cells , 2003 .

[47]  F. Krebs Air stable polymer photovoltaics based on a process free from vacuum steps and fullerenes , 2008 .

[48]  H. Bock,et al.  Influence of indium tin oxide treatment using UV–ozone and argon plasma on the photovoltaic parameters of devices based on organic discotic materials , 2006 .

[49]  Helmut Neugebauer,et al.  Flexible, long-lived, large-area, organic solar cells , 2007 .